Documentation #3808
closed
Block device quick start page need update
Added by Ken Franklin over 11 years ago.
Updated almost 11 years ago.
Description
The instructions don't match well with the bobtail release.
- should include a note that ceph-common needs to be installed on the client.
- since bobtail uses cephx by default, -c
and --secret parameters
are needed to map an rbd image on a client
- according to redmine 3784, the need for modprobe may go away - not sure when this will happen.
-c and --secret aren't needed if you're using the default ceph.conf and your keyring can be found based on your ceph.conf or the default location.
The current writeup also assumes that the mount is local to the cluster so it hides (for the beginner) important details. I think the steps should be structured as if the client is separate from the cluster and therefore initally has no ceph-common, ceph.conf or keyring.
- Description updated (diff)
Fixed description formatting. Also, 3784 is in master now (e94b06a19218decaf7d2d7b009bd862040f20285)
- Status changed from New to In Progress
- Status changed from In Progress to Resolved
This was verified as working with cuttlefish and ceph-deploy.
Also available in: Atom
PDF