Project

General

Profile

Actions
Copy link

Feature #2698

closed

crowbar: Guide for using "front" network

Added by Anonymous almost 12 years ago. Updated almost 12 years ago.

Status:
Closed
Priority:
Normal
Assignee:
JuanJose Galvez
Category:
-
Target version:
v0.50
% Done:

0%

Source:
Tags:
Backport:
Reviewed:
Affected Versions:
Pull request ID:

Files

README.rst (3.1 KB) README.rst command to add inktank-dhcp.conf for upstart JuanJose Galvez, 07/05/2012 04:12 PM
Actions
Copy link
 #1

Updated by Anonymous almost 12 years ago

  • Translation missing: en.field_story_points changed from 1 to 2

We need an easy way to drop a "dhclient eth1" upstart job into a crowbar server installation. Just a sudo tee /etc/init/inktank-dhcp.conf <<EOF to copy-paste should be enough for now.

This should be an addition to https://github.com/ceph/run-crowbar-on-sepia

Not sure if it's safe to have that up before crowbar install or not; test.

Actions
Copy link
 #2

Updated by Anonymous almost 12 years ago

  • Target version set to v0.50
  • Translation missing: en.field_position deleted (1)
  • Translation missing: en.field_position set to 81
Actions
Copy link
 #3

Updated by Anonymous almost 12 years ago

  • Assignee set to JuanJose Galvez
Actions
Copy link
 #4

Updated by JuanJose Galvez almost 12 years ago

I verified that this causes no trouble before crowbar is installed and that eth1 does come up automatically after rebooting. I've attached the new readme file here but already have a pull request on github, so the instructions can be easily merged into the readme.

Actions
Copy link
 #5

Updated by Anonymous almost 12 years ago

  • Status changed from New to Closed

Merged as 90c42837696d252be40348fdd4499e15aa835aeb.

Actions
Copy link

Also available in: Atom PDF