Bug #19967
closed
can't power cycle mira016
Added by Yuri Weinstein almost 7 years ago.
Updated over 6 years ago.
Description
getting error in SOL
Please make your choice from above ['q' to quit | 'b' to begin installation |
'r' to refresh]:
- Category set to Test Node
- Status changed from New to In Progress
Installation
1) [x] Language settings 2) [x] Timezone settings
(English (United States)) (Etc/UTC timezone)
3) [x] Installation source 4) [!] Software selection
(http://172.21.0.11/cblr/links/ (Minimal Install)
RHEL-7.2-Server-x86_64) 6) [x] Kdump
5) [!] Installation Destination (Kdump is enabled)
(No disks selected) 8) [ ] User creation
7) [x] Network configuration (No user will be created)
(Wired (enp4s0) connected)
Please make your choice from above ['q' to quit | 'b' to begin installation |
'r' to refresh]: 5
================================================================================
================================================================================
Probing storage...
Installation Destination
[ ] 1) ST31000528AS: 931.51 GiB (mpatha), 20:01:b4:d2:00:00:00:00:0
[ ] 2) HDS721010CLA330: 931.51 GiB (sdb)
[ ] 3) HDS721010CLA330: 931.51 GiB (sdc)
[ ] 4) HUA722010CLA330: 931.51 GiB (sdd)
[ ] 5) HUA722010CLA330: 931.51 GiB (sde)
[ ] 6) HDS721010CLA330: 931.51 GiB (sdh)
[ ] 7) Select all
No disks selected; please select at least one disk to install to.
The following problem occurred on line 15 of the kickstart file:
Requested boot drive "sda" doesn't exist or cannot be used.
Please make your choice from above ['q' to quit | 'c' to continue |
'r' to refresh]:
Will have to just keep Xenial on this machine. Reimaging now.
Reimaged but sdc and sdg need replacing. Will hang on to ticket for now.
- Status changed from In Progress to Resolved
Replaced disk during last drive party and released.
Also available in: Atom
PDF