Support #54590
open
Enabling second network port on clara
Added by Pragadeeswaran Sathyanarayanan about 2 years ago.
Updated almost 2 years ago.
Description
The clara systems have a NIC with 2 ports. At present, the link is up on the first port.
Would it be possible to enable network connectivity on the second port of the below clara systems?
clara003
clara004
clara006
clara007
clara010
clara011
clara012
clara014
clara015
We are looking to some system test scenarios that require two networks.
- Status changed from New to In Progress
- Assignee set to adam kraitman
Hey Pragadeeswaran I will check if that's possible but which test scenarios you would want to test? If it's bonding it will also require additional configurations on the switch side and this is also something we will need to check if that's possible
Thanks Adam,
Some of the configurations we plan to evaluate are
- having a separate network for OSD
- using a separate network for iSCSI gw
As the systems have 1G cards, we are not planning to test configurations with bond. I am yet to identify systems having a higher speed.
Hi Adam,
Is it a possibility to have the server connected to a second network via port 2?
Thank you,
Pragadee
Hey Pragadeeswaran, The ports are now connected
Thanks Adam,
I am able to see the link is up.
Regarding the network setting for this network, is there anything specific that you would like me to use? If yes, could you let me know? Or would you like me to raise a different tracker for it.
In this network (new), I would like to have a set of static IP addresses that I could use for configuring iSCSI initiators.
Sorry for asking too many questions.
Thank you,
Pragadee
Hey Pragadee you can feel free to ask any questions, I am working on assigning those clara machines IP addresses I will update you soon
Thanks,
Adam
Hey Pragadee, I will set the 2nd interface on those machines to a different vlan (103) then I will write down the IP address you can use
Are there any updates on the request for IP addresses?
Thank you,
Pragadee
Hey Pragadee, We have a config change that we need to do in the DHCP server so I could take a few days
Hey Pragadee, You can set the following IP address on eno2 on each host (netmask 255.255.255.0)
clara003 10.2.217.103
clara004 10.2.217.104
clara006 10.2.217.106
clara007 10.2.217.107
clara010 10.2.217.110
clara011 10.2.217.111
clara012 10.2.217.112
clara014 10.2.217.114
clara015 10.2.217.115
Also available in: Atom
PDF