Feature #3092
closed
sepia burnupi: pxe image for upgrading and configuring burnupi RAID firmware
Added by Anonymous over 11 years ago.
Updated about 11 years ago.
A PXE image that, when booted on burnupi:
- given kernel command line option "burnupi-raid-upgrade": upgrades RAID firmware to what's included on the initrd (if necessary).
- given kernel command line option "burnupi-raid-reconfig": reconfigures the RAID in near-JBOD mode.
This works around the "foreign disk" symptom MarkN has experienced. without losing disk contents.
- Status changed from New to In Progress
- Assignee set to Sandon Van Ness
- Target version set to 2012-09
- Translation missing: en.field_position deleted (
1)
- Translation missing: en.field_position set to 1
I have a script that does this and a PXE image its just not 100% automated by selecting it in cobbler via kernel command line options. Honestly I didn't want a miss-click to possibly re-configure the array which I found changes all the disk UUID's and makes the machine not boot anymore and I have already since flashed and re-setup the array on all the machines. I am inclined to just close this out unless we really want it 100% automated.
- Status changed from In Progress to Resolved
- % Done changed from 0 to 100
Resolving per sage as current setup should be adequate for quickly flashing machines and re-configuring the raid.
Also available in: Atom
PDF