Activity
From 07/20/2017 to 08/18/2017
08/18/2017
- 11:06 PM Bug #21042 (Resolved): Cleanup stale bucket instances
- This is for non-multisite/non-federated.
Legacy/large Ceph clusters end up with a LOT of bucket instances that don... - 11:01 PM Bug #21041 (New): Stale bucket names in user bucket list.
- The list of buckets for some users ends up with buckets that no longer exist sometimes.
There needs to be somethin... - 10:40 PM Bug #20763: Radosgw hangs after a few hours
- Noticed the same keystone revocation processing error in rgw log, with the ceph release v12.1.4. The setup is not uti...
- 01:45 PM Bug #21039 (Closed): S3 AWSv4 wrong signature when PUT-ing files
- # Affected version
Ceph Luminous 12.1.2
# Problem
I'm testing radosgw with s3cmd, because it's the _de facto_ ... - 09:59 AM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Attached is a wireshark dump of the response to a restore test.
We noticed the response has...
08/17/2017
- 07:20 PM Bug #21015 (Fix Under Review): rgw: make HTTP dechunking compatible with Amazon S3
- PRs:
* https://github.com/ceph/civetweb/pull/22,
* https://github.com/ceph/ceph/pull/17072. - 05:55 PM Bug #20951 (Fix Under Review): rgw: send data-log list infinitely
- my issue w/the PR has been addressed, waiting for review by Casey
- 05:55 PM Bug #20906: multisite: FAILED assert(prev_iter != pos_to_prev.end()) in RGWMetaSyncShardCR::colle...
- 05:52 PM Bug #19587: rgw: put lifecycle configuration fails if Prefix is not set
- master PR: https://github.com/ceph/ceph/pull/16818
- 05:11 PM Bug #20912 (Fix Under Review): rgw: TempAUTH lacks support for implicitly tenandted users
- PR: https://github.com/ceph/ceph/pull/17047. Though, I would prefer to have a fix for this bug as a part of bigger re...
- 02:56 PM Bug #20914: cls_rgw.gc_set and defer fail during jewel->luminous upgrade
- 10:10 AM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Radoslaw Zarzynski wrote:
> OK, I'm on it. As a stop gap solution you might consider to deploy RGW beside a proxy th... - 09:32 AM Bug #20773 (In Progress): "radosgw-admin bucket reshard list" is not valid command
- 09:31 AM Bug #20841 (Closed): number of shards for a bucket scheduled for dynamic bucket resharding is not...
- 09:31 AM Bug #20841: number of shards for a bucket scheduled for dynamic bucket resharding is not as the e...
- 40 is the correct number of shards.
we set the new number of shards to be:
(bucket_stats.num_objs + new_obj_number)... - 08:05 AM Bug #21022: rgw: lc process only schdule the first item of lc objects
- https://github.com/ceph/ceph/pull/17061
- 07:58 AM Bug #21022 (Resolved): rgw: lc process only schdule the first item of lc objects
- If more than two bucket hash to the same lc object, only the first bucket will do lifecycle operation. Other buckets ...
- 07:27 AM Documentation #20942: Cannot specify multiple ports for civetweb port/listening_ports due to conf...
- This is badly documented, but you need to use a '+' instead of a ',' and it will get translated here: https://github....
08/16/2017
- 09:08 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- OK, I'm on it. As a stop gap solution you might consider to deploy RGW beside a proxy that would perform the HTTP TE ...
- 08:34 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Radoslaw Zarzynski wrote:
> Wait a minute. It might be that we're having here aws-chunked payload wrapped with HTTP'... - 07:53 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- > Have you tried to retrieve the object back from S3?
I'll check again tomorrow but I believe the data was stored ... - 07:48 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Wait a minute. It might be that we're having here aws-chunked payload wrapped with HTTP's chunked transfer encoding:
... - 07:28 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- > Is there a variant of the aws-chunked encoding whereby when Content-length==x-amz-decoded-content-length then the e...
- 03:42 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Radoslaw Zarzynski wrote:
> What does *57* here?
87 is the length+1 of '4000;chunk-signature=d61f8acc559fdf78158... - 03:25 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Indeed that is strange. Also, is it normal to see *4000* twice before the data?
We are now testing this client with ... - 02:10 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- It appears to me that something terribly wrong happened at the client side. Please take a look on the length-related ...
- 12:52 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- Unfortunately this PR doesn't solve the problem for us. We attached the entire client and server log (running with yo...
- 02:24 AM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- I have a possible fix for this in
https://github.com/ceph/ceph/pull/17040
The logic to compute "to_extract" was u... - 09:03 PM Bug #21015 (In Progress): rgw: make HTTP dechunking compatible with Amazon S3
- 09:02 PM Bug #21015 (Resolved): rgw: make HTTP dechunking compatible with Amazon S3
- 03:02 PM Bug #21013: RGW: Get Bucket ACL does not honor the s3:GetBucketACL action
- 02:09 PM Bug #21013 (Fix Under Review): RGW: Get Bucket ACL does not honor the s3:GetBucketACL action
- 02:09 PM Bug #21013: RGW: Get Bucket ACL does not honor the s3:GetBucketACL action
- master pr: https://github.com/ceph/ceph/pull/17050
- 01:46 PM Bug #21013 (Resolved): RGW: Get Bucket ACL does not honor the s3:GetBucketACL action
- We seem to use GetObjectACL for both object and bucket acl and not support GetBucketACL...
- 12:40 PM Bug #21010 (Resolved): GetObject Tagging needs to exit earlier if the object has no attributes
- We do a call to get_obj_attrs and ignore the ret code.
- 12:19 PM Bug #19632: Bucket lifecycles stick around after buckets are deleted
- Ben Hines wrote:
> (also let me know if there is a way to clean up these old garbage lifecycles -- they seem to have... - 12:18 PM Bug #19632: Bucket lifecycles stick around after buckets are deleted
- Ben Hines wrote:
> 1. Create a rgw bucket.
> 2. Create a bucket lifecycle on the bucket
> 3. Delete the bucket.
>... - 02:36 AM Cleanup #19851: Move AES_256_CTR to auth/Crypto for others to reuse
- PR: https://github.com/ceph/ceph/pull/17012 removes the annoying warning.
- 02:25 AM Bug #21000: rgw: s3 v4 auth fails during chunked file uploads when object size = 0
- I have a possible fix for this problem in:
https://github.com/ceph/ceph/pull/17040
This also contains a fix for sma...
08/15/2017
- 07:46 PM Bug #21000: rgw: s3 v4 auth fails during chunked file uploads when object size = 0
- I have a possible fix for this, but it's failing on "16 byte" objects - which I think is a different problem also rep...
- 04:07 AM Bug #21000 (New): rgw: s3 v4 auth fails during chunked file uploads when object size = 0
- Chunked file transfers of object size 0 fail. Chunked file transfers of larger objects work fine.
In the logs (wi... - 07:41 PM Bug #21003: chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- I think I've found a similar problem around object size = 16. I think it's likely to have the same cause. Object si...
- 01:01 PM Bug #21003 (In Progress): chunk signature mismatch for AWSv4 and Oracle Secure Backup Cloud Module
- We are getting
AWSv4ComplMulti: ERROR: chunk signature mismatch
when trying to upload to 12.1.3 luminous rg... - 03:32 PM Bug #20906 (Fix Under Review): multisite: FAILED assert(prev_iter != pos_to_prev.end()) in RGWMet...
- https://github.com/ceph/ceph/pull/17024
08/14/2017
- 01:16 PM Bug #18079 (Fix Under Review): rgw: need to stream metadata full sync init
- this wasn't actually merged in. Reopened.
- 07:54 AM Bug #20658: RGW: object copied from remote src acl permission become full-control issue
08/13/2017
- 09:01 PM Backport #20992 (In Progress): jewel: AWS4 Presigned URL not accepted by RGW
- 08:56 PM Backport #20992 (Resolved): jewel: AWS4 Presigned URL not accepted by RGW
- https://github.com/ceph/ceph/pull/17009
- 08:54 PM Bug #16463 (Pending Backport): AWS4 Presigned URL not accepted by RGW
- 03:54 PM Bug #16463: AWS4 Presigned URL not accepted by RGW
- Backport created in https://github.com/ceph/ceph/pull/17009
- 03:50 PM Bug #16463: AWS4 Presigned URL not accepted by RGW
- Ah. it gets more fun...
https://github.com/ceph/ceph/commit/078c513b6bc6b1d1da50db1d51fbbb65bddd44b9 fixes this bu... - 03:32 PM Bug #16463: AWS4 Presigned URL not accepted by RGW
- I just hit this bug, and confirm it's still present in 10.2.9.
It's only occuring because of the awsv4 querystring... - 07:19 PM Bug #20991 (Fix Under Review): S3 API Policy Conditions IpAddress and NotIpAddress do not work
- 07:01 PM Bug #20991: S3 API Policy Conditions IpAddress and NotIpAddress do not work
- I've submitted a pull request that fixes the issue along with some basic unit tests: https://github.com/ceph/ceph/pul...
- 06:34 PM Bug #20991 (Resolved): S3 API Policy Conditions IpAddress and NotIpAddress do not work
- There are several bugs in the implementation of the IpAddress and NotIpAddress conditions of the S3 API that cause th...
08/11/2017
- 11:31 PM Bug #19587: rgw: put lifecycle configuration fails if Prefix is not set
- Abhishek Lekshmanan wrote:
> This particular example fails in AWS as well, either you need a prefix or a Filter, I h... - 11:57 AM Bug #19587 (Fix Under Review): rgw: put lifecycle configuration fails if Prefix is not set
- 09:08 AM Bug #19587: rgw: put lifecycle configuration fails if Prefix is not set
- This particular example fails in AWS as well, either you need a prefix or a Filter, I have added support for Filter t...
- 03:53 PM Bug #20934: rgw: bucket index sporadically reshards to 65521 shards
- I will provide you a version next week (going camping).
It may be related to http://tracker.ceph.com/issues/20661(... - 08:00 AM Bug #20934: rgw: bucket index sporadically reshards to 65521 shards
- Orit Wasserman wrote:
> Can you provide rgw logs?
Unfortunately no logs left for last test run.
We fixed indexes... - 06:31 AM Bug #20978 (In Progress): rgw opslog can not record operation name
- 03:03 AM Bug #20978: rgw opslog can not record operation name
- Fixed:
root@ceph-node1# (git::fix-full-uri) curl -v -X GET 'http://localhost:8000/111/666666666666666666666?id=3'... - 02:51 AM Bug #20978 (Resolved): rgw opslog can not record operation name
- rgw: fix opslog operation field
According to Amazon s3[1], current Operation field are using
http method, which s... - 04:09 AM Bug #20980 (Closed): rgw-admin bi purge not removing bucket instance.
- This is an older install, migrated up from pre-Hammer to Jewel. Problem occurs on new buckets as well as older bucket...
08/10/2017
- 06:12 PM Bug #20763: Radosgw hangs after a few hours
- From the information here, looks like the hang is caused at the time of log rotation. That means it would be possible...
- 06:06 PM Bug #20934: rgw: bucket index sporadically reshards to 65521 shards
- Can you provide rgw logs?
- 05:33 PM Bug #20934 (In Progress): rgw: bucket index sporadically reshards to 65521 shards
- 03:25 PM Bug #20934 (Fix Under Review): rgw: bucket index sporadically reshards to 65521 shards
- 05:52 PM Bug #20935 (Fix Under Review): rgw opslog cannot record referrer when using curl as client
- 05:47 PM Bug #20951 (In Progress): rgw: send data-log list infinitely
- https://github.com/ceph/ceph/pull/16926
(assigning to myself to shepherd this) - 05:43 PM Bug #19194 (Duplicate): after s3cmd put file to bucket, 'radosgw-admin usage show --categories=pu...
- 02:54 PM Bug #20914: cls_rgw.gc_set and defer fail during jewel->luminous upgrade
- I run the tests on my local Ceph on jewel and luminous, both tests passed.
Next step is to install the packages and ... - 06:33 AM Bug #20794 (In Progress): rgw: the TempURL implementation, in case of auth failure, returns 403 i...
08/09/2017
- 07:36 PM Backport #20969 (In Progress): jewel: rgw: fix radosgw-admin bucket limit check arg parsing error
- 07:34 PM Backport #20969 (Resolved): jewel: rgw: fix radosgw-admin bucket limit check arg parsing error
- https://github.com/ceph/ceph/pull/16952
- 07:34 PM Bug #20966 (Pending Backport): rgw: fix radosgw-admin bucket limit check arg parsing error
- 06:45 PM Bug #20966: rgw: fix radosgw-admin bucket limit check arg parsing error
- Backport PR https://github.com/ceph/ceph/pull/16952
- 06:39 PM Bug #20966: rgw: fix radosgw-admin bucket limit check arg parsing error
- This was fixed in master ceph/pr/15316 prior to luminous branching, but seems never backported to Jewel
- 06:35 PM Bug #20966 (Resolved): rgw: fix radosgw-admin bucket limit check arg parsing error
- "bucket limit check" was mis-added to the rgw-admin argument parsing
Patch follows - 07:33 PM Bug #20177 (Resolved): RGW lifecycle not expiring objects due to permissions on lc pool
- 07:29 PM Bug #20177 (Pending Backport): RGW lifecycle not expiring objects due to permissions on lc pool
- 07:32 PM Backport #20967 (Resolved): luminous: RGW lifecycle not expiring objects due to permissions on lc...
- 07:30 PM Backport #20967 (Resolved): luminous: RGW lifecycle not expiring objects due to permissions on lc...
- https://github.com/ceph/ceph/pull/16943
- 07:31 PM Backport #20968 (Resolved): luminous: rgw: bytes_send and bytes_recv in the msg of usage show ret...
- https://github.com/ceph/ceph/pull/17444
- 06:35 PM Backport #20902 (In Progress): jewel: bucket check --fix fails with (90) Message too long
- 06:16 PM Backport #20902 (Fix Under Review): jewel: bucket check --fix fails with (90) Message too long
- 06:32 PM Backport #20962 (Resolved): luminous: rgw not responding after receiving SIGHUP signal.
- https://github.com/ceph/ceph/pull/17113
- 06:25 PM Bug #19870 (Pending Backport): rgw: bytes_send and bytes_recv in the msg of usage show returning ...
- 06:24 PM Bug #19870: rgw: bytes_send and bytes_recv in the msg of usage show returning is 0 in master branch
- does this need backport (L?)
- 03:55 PM Bug #20951: rgw: send data-log list infinitely
- Orit Wasserman wrote:
> Can you provide the rgw logs?
useful info of the rgw logs is:
2017-08-08 16:59:01.979654... - 11:43 AM Bug #20951: rgw: send data-log list infinitely
- Can you provide the rgw logs?
- 03:58 AM Bug #20951: rgw: send data-log list infinitely
- Sending data-log infinitely caused the opposite end stuck with high cpu usage.
- 03:42 AM Bug #20951: rgw: send data-log list infinitely
- radosgw send data-log list infinitely when opposite end trimmed the data-log and in quiescence.
the sending side a... - 03:41 AM Bug #20951 (Resolved): rgw: send data-log list infinitely
- radosgw send data-log list infinitely when opposite end trimmed the data-log and in quiescence.
the sending side a...
08/08/2017
- 10:01 PM Bug #20285: Lifecycle thread will still handle the bucket even if it has been removed.
- I wrote this up in April. http://tracker.ceph.com/issues/19632
- 05:04 PM Bug #20937 (Pending Backport): rgw not responding after receiving SIGHUP signal.
- 04:40 PM Bug #20937: rgw not responding after receiving SIGHUP signal.
- merged https://github.com/ceph/ceph/pull/16854
- 03:22 PM Bug #20946 (Fix Under Review): rgw: bulk operations of Swift API don't participate in transfer ac...
- PR: https://github.com/ceph/ceph/pull/16904.
- 02:47 PM Bug #20946 (Fix Under Review): rgw: bulk operations of Swift API don't participate in transfer ac...
- This is because they don't call *ACCOUNTING_IO(s)->set_account(true);* while the accounting is disabled by default.
- 08:34 AM Bug #20177 (Fix Under Review): RGW lifecycle not expiring objects due to permissions on lc pool
- https://github.com/ceph/ceph/pull/16889
- 02:53 AM Documentation #20942: Cannot specify multiple ports for civetweb port/listening_ports due to conf...
- this bug has existed for a long time it seems.
- 02:51 AM Documentation #20942 (Resolved): Cannot specify multiple ports for civetweb port/listening_ports ...
- civetweb uses commas to split some configuration options, most notably listening_ports/port, but also commas could be...
08/07/2017
- 11:02 PM Bug #20935 (In Progress): rgw opslog cannot record referrer when using curl as client
- 09:36 AM Bug #20935: rgw opslog cannot record referrer when using curl as client
- fixed:
root@ceph-node1# (git::master) curl -e ceph localhost:8000/111/7777777777777777
<?xml version="1.0" encodi... - 09:33 AM Bug #20935 (Resolved): rgw opslog cannot record referrer when using curl as client
- curl --referer jiaying localhost:8000/111/66666666666666666666666666
root@ceph-node1# (git::master) ./bin/radosgw-... - 04:24 PM Bug #20912: rgw: TempAUTH lacks support for implicitly tenandted users
- We aren't trying to match an account name, provided by client as a part of *X-Auth-User*, against the implicit tenant...
- 02:52 PM Bug #20937 (Resolved): rgw not responding after receiving SIGHUP signal.
- rgw not responding to user's request after receiving SIGHUP signal. Here is the thread backtrace result:
the signa... - 11:22 AM Feature #20936 (New): Multisite: compressed data sync
- Currently, during multisite data sync, the objects are transferred in original size, even if the compressed objects i...
- 09:33 AM Bug #20931 (In Progress): rgw opslog can not record remote_addr
- 08:01 AM Bug #20931: rgw opslog can not record remote_addr
- fixed:
root@ceph-node1# (git::master) ./bin/radosgw-admin -c ceph.conf log show --object=2017-08-07-15-7d4b3b73-f... - 07:54 AM Bug #20931 (Resolved): rgw opslog can not record remote_addr
- env:
vstart.sh created cluster, lasted master version.
create a bucket with s3cmd,the check rgw ops log:
r... - 09:10 AM Bug #20934 (Resolved): rgw: bucket index sporadically reshards to 65521 shards
- luminous v12.1.1
With rgw_dynamic_resharding=true about 10% of buckets` indexes were resharded each to 65521 shard... - 05:38 AM Backport #20895 (In Progress): jewel: rgw: Bucket check doesn't work as expected
08/05/2017
- 01:23 AM Bug #19870: rgw: bytes_send and bytes_recv in the msg of usage show returning is 0 in master branch
- Turns out the actual teuthologic logic to test usage now lives in the ceph repo! So
https://github.com/ceph/ceph/...
08/04/2017
- 11:29 PM Bug #19870: rgw: bytes_send and bytes_recv in the msg of usage show returning is 0 in master branch
- I've posted a fix against master for the bytes usage fix.
https://github.com/ceph/ceph/pull/16834
I got rid of s... - 07:23 PM Bug #20914 (Duplicate): cls_rgw.gc_set and defer fail during jewel->luminous upgrade
- #20689
- 06:41 PM Bug #20914 (Won't Fix): cls_rgw.gc_set and defer fail during jewel->luminous upgrade
- ...
- 05:53 PM Bug #20912 (Fix Under Review): rgw: TempAUTH lacks support for implicitly tenandted users
- 03:16 PM Bug #20897: rgw: the overloaded comparison operators of rgw_bucket disrespect tenants
- Stuffing *rgw_bucket::operator<()* with *ceph_abort()* showed it's involved in quota-related calculations:...
- 11:52 AM Bug #20872 (In Progress): rgw: lifecycle policies fail when filter xml tag is specified
- master pr: https://github.com/ceph/ceph/pull/16818
08/03/2017
- 09:46 PM Bug #20906: multisite: FAILED assert(prev_iter != pos_to_prev.end()) in RGWMetaSyncShardCR::colle...
- possibly related to cls changes in https://github.com/ceph/ceph/pull/16667?
- 07:42 PM Bug #20906 (Resolved): multisite: FAILED assert(prev_iter != pos_to_prev.end()) in RGWMetaSyncSha...
- ...
- 08:29 PM Bug #20308 (Resolved): implement stringlike wildcard for bucket policy
- 06:17 PM Bug #20308: implement stringlike wildcard for bucket policy
- 07:00 PM Feature #20905 (New): multisite: rate limit the number of outstanding http requests for sync
- In configurations with many buckets (and especially with many shards per bucket), multisite sync generates http reque...
- 06:33 PM Backport #20900 (In Progress): jewel: Object data loss in RGW when multipart upload completion t...
- 06:32 PM Backport #20900 (Resolved): jewel: Object data loss in RGW when multipart upload completion time...
- https://github.com/ceph/ceph/pull/16767
- 06:32 PM Backport #20903 (Rejected): kraken: bucket check --fix fails with (90) Message too long
- 06:32 PM Backport #20902 (Resolved): jewel: bucket check --fix fails with (90) Message too long
- https://github.com/ceph/ceph/pull/16880
- 06:32 PM Backport #20901 (Rejected): kraken: Object data loss in RGW when multipart upload completion tim...
- 06:31 PM Bug #20861: Object data loss in RGW when multipart upload completion times out
- The chances of a kraken 11.2.2 seeing the light of day are low-to-non-existent, but OK.
- 05:58 PM Bug #20861: Object data loss in RGW when multipart upload completion times out
- jewel backport PR is 16767
- 05:57 PM Bug #20861 (Pending Backport): Object data loss in RGW when multipart upload completion times out
- 03:52 AM Bug #20861: Object data loss in RGW when multipart upload completion times out
- Jeegn Chen : I agree that the current approach is not completely fool-proof and would only reduce the probability of ...
- 02:59 AM Bug #20861: Object data loss in RGW when multipart upload completion times out
- If we want to go with no lock, then should have the state saved in omap or something more relevant to store with a ti...
- 02:22 AM Bug #20861: Object data loss in RGW when multipart upload completion times out
- (updated this with more detail)
- 02:16 AM Bug #20861: Object data loss in RGW when multipart upload completion times out
- I'm a bit skeptical this approach is much more compelling. I'm a bit more interested if we can get substantially mor...
- 01:59 AM Bug #20861: Object data loss in RGW when multipart upload completion times out
- Using lock here should mitigate the issue but there seems still some problems.
For example, if rgw_mp_lock_max_time ... - 06:18 PM Bug #20841: number of shards for a bucket scheduled for dynamic bucket resharding is not as the e...
- Hi,
Could your describe the scenario?
Could you attach the radosgw logs?
- 06:11 PM Bug #20866 (Fix Under Review): rgw: crash in system_obj_set_attrs when got SIGHUP
- 06:11 PM Bug #20763: Radosgw hangs after a few hours
- 08:42 AM Bug #20763: Radosgw hangs after a few hours
- I finally managed to reproduce it while collecting log files:
I did set up a continuous torture test using rclone:... - 06:11 PM Bug #20872: rgw: lifecycle policies fail when filter xml tag is specified
- 06:04 PM Bug #20787 (Won't Fix): the bucket created by swift can not be used by s3
- 06:00 PM Bug #15445 (Won't Fix): multisite s3tests test_versioning_obj_create_versions_remove_special_name...
- Won't be fixed in hammer
- 05:57 PM Bug #18260 (In Progress): When uploading a large number of objects constantly, the objects number...
- 05:50 PM Bug #20862 (Fix Under Review): rgw: RadosGW lacks support for Swift's ContainerTempurl
- PR: https://github.com/ceph/ceph/pull/16792.
- 05:46 PM Bug #20772 (Pending Backport): bucket check --fix fails with (90) Message too long
- 04:46 PM Bug #20897 (Fix Under Review): rgw: the overloaded comparison operators of rgw_bucket disrespect ...
- PR: https://github.com/ceph/ceph/pull/16796.
- 04:37 PM Bug #20897 (Resolved): rgw: the overloaded comparison operators of rgw_bucket disrespect tenants
- 01:23 PM Bug #18470: rgw: Bucket check doesn't work as expected
- I created the backport tracker http://tracker.ceph.com/issues/20895 - anyone want to give it a try? (Don't forget to ...
- 11:31 AM Bug #18470 (Pending Backport): rgw: Bucket check doesn't work as expected
- 10:56 AM Bug #18470: rgw: Bucket check doesn't work as expected
- The original regression has been introduced via https://github.com/ceph/ceph/pull/6501 and is present in Jewel 10.2.7...
- 11:36 AM Backport #20895 (Resolved): jewel: rgw: Bucket check doesn't work as expected
- https://github.com/ceph/ceph/pull/16856
- 11:29 AM Backport #20513 (Resolved): jewel: Stale bucket index entries are left over after object deletions
- 11:22 AM Bug #16355 (Resolved): radosgw-admin command, adding the tenants can not view the user usage
- Resolved in https://github.com/ceph/ceph/pull/13220 (already merged).
- 11:19 AM Bug #17215 (Resolved): Unable to suspend a user that is part of a tenant
- Resolved in https://github.com/ceph/ceph/pull/13220.
08/02/2017
- 02:32 PM Feature #20883: rgw: responses for HEAD/GET on Swift's container should contain Last-Modified
- PR: https://github.com/ceph/ceph/pull/16757.
- 02:26 PM Feature #20883 (Fix Under Review): rgw: responses for HEAD/GET on Swift's container should contai...
- *test.functional.test_tempurl.TestContainerTempurl.test_tempurl_keys_hidden_from_acl_readonly* and *test.functional.t...
- 01:56 PM Bug #20368 (Resolved): rados/upgrade rgw swift test fails
- 01:56 PM Backport #20520 (Resolved): kraken: rados/upgrade rgw swift test fails
08/01/2017
- 03:45 PM Bug #20861: Object data loss in RGW when multipart upload completion times out
- questions posted in PR
- 03:20 PM Bug #20861: Object data loss in RGW when multipart upload completion times out
- Adding more details:
The root cause of missing parts of a multipart object is a race in 2 contending calls to RGWC... - 03:03 PM Bug #20872 (Resolved): rgw: lifecycle policies fail when filter xml tag is specified
- http://docs.aws.amazon.com/AmazonS3/latest/API/RESTBucketPUTlifecycle.html mentions a Filter xml tag and using this o...
- 12:17 PM Backport #20263 (Resolved): kraken: "datalog trim" can't work as expected
- 12:17 PM Backport #19843 (Resolved): kraken: Add custom user data support in bucket index
- 11:14 AM Backport #19759 (Resolved): kraken: multisite: after CreateBucket is forwarded to master, local b...
- 11:12 AM Backport #20347 (Resolved): kraken: rgw: meta sync thread crash at RGWMetaSyncShardCR
- 10:57 AM Backport #20410 (In Progress): jewel: rgw: Part's index is not removed when versioning enabled
- 10:55 AM Backport #20346 (In Progress): jewel: rgw: meta sync thread crash at RGWMetaSyncShardCR
- 08:22 AM Backport #20821 (In Progress): jewel: With RGWs configured in a load balancer, quota stats cache ...
- https://github.com/ceph/ceph/pull/16720
- 06:06 AM Bug #20866: rgw: crash in system_obj_set_attrs when got SIGHUP
https://github.com/ceph/ceph/pull/16716- 02:55 AM Bug #20866 (Closed): rgw: crash in system_obj_set_attrs when got SIGHUP
- backtrace:
1: (()+0x66284a) [0x7f30c1a9b84a]
2: (()+0xf100) [0x7f30c0db6100]
3: (gsignal()+0x37) [0x7f30c00f1...
07/31/2017
- 03:19 PM Bug #20862 (In Progress): rgw: RadosGW lacks support for Swift's ContainerTempurl
- 03:17 PM Bug #20862 (Fix Under Review): rgw: RadosGW lacks support for Swift's ContainerTempurl
- RadosGW lacks support for TempUrls authorized with container-scoped keys (*X-Container-Meta-Temp-URL-Key*, *X-Contain...
- 02:25 PM Bug #20861 (Resolved): Object data loss in RGW when multipart upload completion times out
- Recently in one of the clusters, lost some of objects if a multipart complete upload times out and been retried befor...
- 01:21 PM Backport #19840 (Resolved): kraken: civetweb frontend segfaults in Luminous
- 01:09 PM Bug #20772 (Fix Under Review): bucket check --fix fails with (90) Message too long
- 11:54 AM Bug #20772: bucket check --fix fails with (90) Message too long
- https://github.com/ceph/ceph/pull/16692
- 10:41 AM Bug #19059 (Resolved): rgw_file: restore (corrected) fix for dir "partial match" (return of FLAG...
- 10:41 AM Backport #20195 (Resolved): kraken: rgw_file: restore (corrected) fix for dir "partial match" (r...
- 10:41 AM Bug #19624 (Resolved): rgw_file: handle chunked readdir
- 10:41 AM Backport #20158 (Resolved): kraken: rgw_file: handle chunked readdir
- 10:41 AM Bug #19623 (Resolved): rgw_file: introduce rgw_lookup type hints
- 10:40 AM Backport #19723 (Resolved): kraken: rgw_file: introduce rgw_lookup type hints
- 10:40 AM Bug #19625 (Resolved): rgw_file: fix event expire check, don't expire directories being read
- 10:40 AM Backport #19663 (Resolved): kraken: rgw_file: fix event expire check, don't expire directories be...
- 10:40 AM Bug #19634 (Resolved): rgw_file: fix readdir after dir-change
- 10:39 AM Backport #19661 (Resolved): kraken: rgw_file: fix readdir after dir-change
- 10:38 AM Bug #19435 (Resolved): rgwfs hung due to missing unlock within unlink operation
- 10:38 AM Backport #19526 (Resolved): kraken: rgwfs hung due to missing unlock within unlink operation
- 10:38 AM Bug #19112 (Resolved): rgw_file: RGWFileHandle dtor must also cond-unlink from FHCache
- 10:38 AM Backport #19471 (Resolved): kraken: rgw_file: RGWFileHandle dtor must also cond-unlink from FHCache
- 10:38 AM Bug #19270 (Resolved): rgw_file: leaf objects (which store Unix attrs) can be deleted when child...
- 10:37 AM Backport #19470 (Resolved): kraken: rgw_file: leaf objects (which store Unix attrs) can be delete...
- 10:37 AM Bug #18651 (Resolved): librgw: objects created from s3 apis are not visible from nfs mount point
- 10:37 AM Backport #19229 (Resolved): kraken: librgw: objects created from s3 apis are not visible from nfs...
- 10:37 AM Bug #18989 (Resolved): rgw_file: allow setattr on placeholder (common_prefix) directories
- 10:36 AM Backport #19170 (Resolved): kraken: rgw_file: allow setattr on placeholder (common_prefix) direc...
- 10:36 AM Bug #18991 (Resolved): rgw_file: RGWReaddir (and cognate ListBuckets request) don't enumerate mu...
- 10:36 AM Backport #19168 (Resolved): kraken: rgw_file: RGWReaddir (and cognate ListBuckets request) don't...
- 10:35 AM Bug #18992 (Resolved): rgw_file: "exact match" invalid for directories, in RGWLibFS::stat_leaf()
- 10:35 AM Backport #19166 (Resolved): kraken: rgw_file: "exact match" invalid for directories, in RGWLibFS...
- 10:35 AM Bug #19018 (Resolved): rgw_file: fix marker computation
- 10:35 AM Backport #19162 (Resolved): kraken: rgw_file: fix marker computation
- 10:34 AM Bug #19036 (Resolved): rgw_file: fix recycling of invalid mkdir handles
- 10:34 AM Backport #19154 (Resolved): kraken: rgw_file: fix recycling of invalid mkdir handles
- 10:34 AM Bug #19066 (Resolved): rgw_file: ensure valid_s3_object_name for directories
- 10:34 AM Backport #19149 (Resolved): kraken: rgw_file: ensure valid_s3_object_name for directories
- 10:34 AM Bug #19111 (Resolved): rgw_file: FHCache residence check should be exhaustive
- 10:33 AM Backport #19144 (Resolved): kraken: rgw_file: FHCache residence check should be exhaustive
- 10:33 AM Bug #18650 (Resolved): librgw: path segments neglect to ref parents
- 10:33 AM Backport #18902 (Resolved): kraken: librgw: path segments neglect to ref parents
- 10:33 AM Bug #18808 (Resolved): librgw: RGWLibFS::setattr fails on directories
- 10:33 AM Backport #18810 (Resolved): kraken: librgw: RGWLibFS::setattr fails on directories
- 09:35 AM Bug #20763: Radosgw hangs after a few hours
- Sorry for the delay, had a busy week.
Sadly the log file I created had the error right away, now my rados gateway do...
07/28/2017
- 03:31 PM Bug #20797 (Fix Under Review): rgw: putting X-Object-Manifest via TempURL should be prohibited
- https://github.com/ceph/ceph/pull/16659
- 03:29 PM Feature #20795 (Fix Under Review): rgw: the TempURL implementation should support ISO8601 in temp...
- https://github.com/ceph/ceph/pull/16658
- 09:16 AM Bug #20841 (Closed): number of shards for a bucket scheduled for dynamic bucket resharding is not...
- For a bucket having say 20K objects and rgw_max_objs_per_shard = 1000, the shards counted is expected to be 32. Inste...
- 08:40 AM Bug #20763: Radosgw hangs after a few hours
- Observed same issue with luminous (rc) 12.1.1 .
2017-07-28 03:32:47.670056 7efc98597700 0 ERROR: keystone revocat... - 07:05 AM Backport #20824 (In Progress): jewel: rgw: AWSv4 encoding/signature problem, can happen with list...
- 06:16 AM Backport #20824 (Resolved): jewel: rgw: AWSv4 encoding/signature problem, can happen with listobj...
- https://github.com/ceph/ceph/pull/17731
- 06:17 AM Backport #20836 (Rejected): kraken: radosgw Segmentation fault when service is restarted during l...
- 06:17 AM Backport #20833 (Rejected): kraken: website request URL without slashes (for folder) returns error
- 06:17 AM Backport #20832 (Rejected): jewel: website request URL without slashes (for folder) returns error
- 06:16 AM Backport #20831 (Rejected): kraken: rgw: X-Account-Access-Control of Swift API should be omitted ...
- 06:16 AM Backport #20830 (Rejected): jewel: rgw: URI with \0 in the middle is silently handled as its init...
- 06:16 AM Backport #20829 (Rejected): kraken: rgw: URI with \0 in the middle is silently handled as its ini...
- 06:16 AM Backport #20828 (Rejected): jewel: rgw: S3 object uploads using aws-sdk-java 1.11 to do chunked t...
- 06:16 AM Backport #20827 (Rejected): kraken: rgw: S3 object uploads using aws-sdk-java 1.11 to do chunked ...
- 06:16 AM Backport #20826 (Rejected): kraken: rgw_file: support compression
- 06:16 AM Backport #20825 (Rejected): kraken: rgw: AWSv4 encoding/signature problem, can happen with listob...
- 06:16 AM Backport #20822 (Rejected): kraken: With RGWs configured in a load balancer, quota stats cache do...
- 06:16 AM Backport #20821 (Resolved): jewel: With RGWs configured in a load balancer, quota stats cache doe...
- https://github.com/ceph/ceph/pull/16720
- 06:16 AM Backport #20820 (Resolved): jewel: Segmentation fault when exporting rgw bucket in nfs-ganesha
- https://github.com/ceph/ceph/pull/17285
- 06:16 AM Backport #20819 (Rejected): kraken: rgw hangs in RGWRealmReloader::reload on SIGHUP
- 06:16 AM Backport #20818 (Resolved): jewel: rgw hangs in RGWRealmReloader::reload on SIGHUP
- https://github.com/ceph/ceph/pull/17281
- 06:16 AM Backport #20817 (Rejected): jewel: rgw: RadosGW leaks memory during Swift Static Website's error ...
- 06:16 AM Backport #20816 (Rejected): kraken: rgw: RadosGW leaks memory during Swift Static Website's error...
- 06:16 AM Backport #20815 (Resolved): jewel: rgw: uninitialized memory is accessed during creation of bucke...
- https://github.com/ceph/ceph/pull/17280
- 06:16 AM Backport #20814 (Rejected): kraken: rgw: uninitialized memory is accessed during creation of buck...
- 06:16 AM Backport #20813 (Resolved): jewel: rgw: usage logging on tenated buckets causes invalid memory reads
- https://github.com/ceph/ceph/pull/17279
- 06:16 AM Backport #20812 (Rejected): kraken: rgw: usage logging on tenated buckets causes invalid memory r...
07/27/2017
- 10:25 PM Bug #20802: rgw multisite: clean up deleted bucket instance and index objects
- Semi-related, i noticed that lifecycle entries for deleted buckets stick around as well:
http://tracker.ceph.com/iss... - 06:34 PM Bug #20802 (Fix Under Review): rgw multisite: clean up deleted bucket instance and index objects
- 10:16 PM Bug #20763: Radosgw hangs after a few hours
- I've been seeing the same thing with Luminous 12.1.1.
I think you're right that it could be associated with the SI... - 06:11 PM Bug #20763: Radosgw hangs after a few hours
- Possible that this is related to http://tracker.ceph.com/issues/20686 ?
- 09:10 PM Bug #20466 (New): testSmallUpload:111->writeRenameReadCompare:80 » AccessControl
- 09:10 PM Bug #20466: testSmallUpload:111->writeRenameReadCompare:80 » AccessControl
- @matt,
this run was on master which is almost 28 days old, If things have changed now I can rerun this again, but ... - 06:28 PM Bug #20466 (Need More Info): testSmallUpload:111->writeRenameReadCompare:80 » AccessControl
- 06:28 PM Bug #20466: testSmallUpload:111->writeRenameReadCompare:80 » AccessControl
- @vasu, is this currently reproducing with test fix builds and/or master/Luminous?
thanks,
Matt - 06:44 PM Bug #20794 (Fix Under Review): rgw: the TempURL implementation, in case of auth failure, returns ...
- PR: https://github.com/ceph/ceph/pull/16636.
- 05:26 PM Bug #20794 (In Progress): rgw: the TempURL implementation, in case of auth failure, returns 403 i...
- 03:31 PM Bug #20794 (In Progress): rgw: the TempURL implementation, in case of auth failure, returns 403 i...
- 06:30 PM Bug #20418 (Pending Backport): rgw: URI with \0 in the middle is silently handled as its initial ...
- 06:29 PM Bug #20462 (Pending Backport): rgw_file: support compression
- 06:28 PM Bug #20447 (Pending Backport): rgw: S3 object uploads using aws-sdk-java 1.11 to do chunked trans...
- 06:26 PM Bug #20395 (Pending Backport): rgw: X-Account-Access-Control of Swift API should be omitted if th...
- 06:23 PM Bug #19042: rgw: multiple zonegroups: bucket can't be created if the user name isn't registered o...
- 06:22 PM Bug #20166: RGW: Bad error handling when tail object is missing
- 06:20 PM Bug #20308: implement stringlike wildcard for bucket policy
- replaced by pr https://github.com/ceph/ceph/pull/16491
- 06:19 PM Bug #20378 (Resolved): rgw: fix copy object err when bucket with specified placement rule
- 06:15 PM Bug #20463 (Pending Backport): rgw: AWSv4 encoding/signature problem, can happen with listobjects...
- 06:15 PM Bug #20463: rgw: AWSv4 encoding/signature problem, can happen with listobjects marker.
- jewel backport at: https://github.com/ceph/ceph/pull/16456
- 06:15 PM Bug #20307 (Pending Backport): website request URL without slashes (for folder) returns error
- 06:02 PM Bug #20774 (Pending Backport): rgw: uninitialized memory is accessed during creation of bucket's ...
- 06:01 PM Bug #20757 (Pending Backport): rgw: RadosGW leaks memory during Swift Static Website's error hand...
- 02:19 PM Bug #20757: rgw: RadosGW leaks memory during Swift Static Website's error handling
- Radoslaw Zarzynski wrote:
> PR: https://github.com/ceph/ceph/pull/16531.
merged - 06:00 PM Bug #20779 (Pending Backport): rgw: usage logging on tenated buckets causes invalid memory reads
- 02:18 PM Bug #20779: rgw: usage logging on tenated buckets causes invalid memory reads
- Radoslaw Zarzynski wrote:
> PR: https://github.com/ceph/ceph/pull/16604.
merged - 05:56 PM Bug #19277 (Won't Fix): Legacy buckets cannot enable versioning
- 05:55 PM Bug #20612 (Can't reproduce): radosgw ceases responding to list requests
- 05:54 PM Bug #20756 (Closed): radosgw daemon crash when service is restarted during lifecycle processing
- 05:54 PM Bug #20755 (Closed): radosgw crash when service is restarted during lifecycle processing
- 05:52 PM Bug #20787: the bucket created by swift can not be used by s3
- you can set rgw_relaxed_s3_bucket_names=true to access this bucket in s3
- 02:50 AM Bug #20787 (Won't Fix): the bucket created by swift can not be used by s3
- 1. swift as a sub user for s3
2. the name of buckets created by swift does not consider restriction, and s3 can not ... - 05:43 PM Bug #20671: rgw multisite: objects encrypted with SSE-KMS are stored unencrypted in target zone
- https://github.com/ceph/ceph/pull/16612
- 05:40 PM Bug #19870: rgw: bytes_send and bytes_recv in the msg of usage show returning is 0 in master branch
- can Marcus propose a simple fix so other developers can review and suggest alternatives?
- 05:38 PM Bug #20772 (In Progress): bucket check --fix fails with (90) Message too long
- 05:37 PM Bug #19956 (Pending Backport): radosgw Segmentation fault when service is restarted during lifecy...
- 02:23 PM Bug #19956: radosgw Segmentation fault when service is restarted during lifecycle processing
- merged https://github.com/ceph/ceph/pull/16495
- 05:35 PM Bug #20490 (Closed): rgw: can not list buckets when enable s3 website hosting and use domain
- 08:01 AM Bug #20490: rgw: can not list buckets when enable s3 website hosting and use domain
- hi, i found the reason,i set rgw_dns_s3website_name and rgw_dns_name the same domain and use the same port for s3 and...
- 05:27 PM Bug #20800 (New): rgw: TempAUTH should respest frontend's prefix parameter when constructing X-St...
- 05:26 PM Bug #20797 (In Progress): rgw: putting X-Object-Manifest via TempURL should be prohibited
- 03:40 PM Bug #20797 (Resolved): rgw: putting X-Object-Manifest via TempURL should be prohibited
- *test.functional.test_tempurl:TestTempURLPrefix.test_PUT_manifest_access* of Swift's functional tests enforces that.
... - 03:33 PM Bug #20661 (Pending Backport): With RGWs configured in a load balancer, quota stats cache doesn't...
- 02:28 PM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- Pavan Rallabhandi wrote:
> https://github.com/ceph/ceph/pull/16389
merged - 03:32 PM Feature #20795 (Fix Under Review): rgw: the TempURL implementation should support ISO8601 in temp...
- 02:52 PM Bug #20708 (Resolved): rgw: policy cannot parse Condition with IfExists
- 02:26 PM Bug #20708: rgw: policy cannot parse Condition with IfExists
- merged https://github.com/ceph/ceph/pull/16463
07/26/2017
- 08:32 PM Bug #20668: rgw multisite: cannot sync objects encrypted with SSE-C
- https://github.com/ceph/ceph/pull/16612
- 06:30 PM Bug #19056: radosgw S3 AWS4 signature and keystone integration broken
- Valery Tschopp wrote:
> Can it be backported to Jewel? We are running Jewel in our production cluster.
I'm afraid... - 01:33 PM Bug #20779 (Fix Under Review): rgw: usage logging on tenated buckets causes invalid memory reads
- PR: https://github.com/ceph/ceph/pull/16604.
- 01:23 PM Bug #20779 (In Progress): rgw: usage logging on tenated buckets causes invalid memory reads
- 01:23 PM Bug #20779 (Resolved): rgw: usage logging on tenated buckets causes invalid memory reads
- Valgrind reports:...
- 12:51 PM rgw-testing Bug #20778 (New): Add a test for all radosgw-admin commands and parameters
- 12:50 PM Bug #20777 (Resolved): usage of --inconsistent-index should require user confirmation and print a...
- 12:28 PM Bug #20774 (Fix Under Review): rgw: uninitialized memory is accessed during creation of bucket's ...
- PR: https://github.com/ceph/ceph/pull/16601.
- 12:10 PM Bug #20774 (Resolved): rgw: uninitialized memory is accessed during creation of bucket's metadata
- Valgrind reports:...
- 08:51 AM Bug #20773: "radosgw-admin bucket reshard list" is not valid command
- remove_objs_from_index should limit the number of item it send in each dir_suggest_changes op
- 08:30 AM Bug #20773 (Resolved): "radosgw-admin bucket reshard list" is not valid command
- At the moment we ignore the extra "list" variable, we should fail the command
- 07:54 AM Bug #20772 (Resolved): bucket check --fix fails with (90) Message too long
- After failure when running bucket rm --purge-objects --bypass-gc --inconsistent-index.
Trying to fix the bucket ind...
07/25/2017
- 07:46 PM Bug #20373: "test_get_manifest (test.functional.tests.TestDlo)*" failed in rgw
- and running at http://pulpito.ceph.com/yuriw-2017-07-25_19:46:08-rgw-wip-yuri-master_2017_7_24-distro-basic-smithi/
- 06:47 PM Bug #20763: Radosgw hangs after a few hours
- Sure.
ceph -s:... - 03:57 PM Bug #20763: Radosgw hangs after a few hours
- Hi Martin,
Can you provide a log snippet at -d --debug-rgw=20 --debug-ms=1 and include the transition to the hang ... - 03:49 PM Bug #20763: Radosgw hangs after a few hours
- I am seeing similar issues on upgrade from 10.2.6 to 12.1.0 (dev). I am not using Keystone.
My keystone specific c... - 05:07 AM Bug #20763 (Closed): Radosgw hangs after a few hours
- Since upgrading to 12.1, our Object Gateways hang after a few hours, I only see these messages in the log file:
2... - 03:31 PM Bug #20527: v2 presigned URLs don't work with radosgw.
- We can ignore my comments here. They are caused by an incorrect configuration of "rgw dns name" in /etc/ceph/ceph.co...
- 11:51 AM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- 06:13 AM Bug #19956: radosgw Segmentation fault when service is restarted during lifecycle processing
- Looks like the fix is at https://github.com/ceph/ceph/pull/16495 and this was duplicated by http://tracker.ceph.com/i...
- 03:14 AM Feature #20733: RGW bucket limits
- up
- 12:12 AM Bug #20755: radosgw crash when service is restarted during lifecycle processing
- PR: https://github.com/ceph/ceph/pull/16495/commits/008b91c5fb0c3b030ac73f654e11158acbd74419
07/24/2017
- 10:23 PM Bug #20373: "test_get_manifest (test.functional.tests.TestDlo)*" failed in rgw
- Building wip-yuri-master_2017_7_24
- 08:45 PM Bug #20527: v2 presigned URLs don't work with radosgw.
- Discovered that Hammer's auth_hdr debug output ends with:...
- 07:48 PM Bug #20527: v2 presigned URLs don't work with radosgw.
- I was able to reproduce this by running s3curl against demo Docker containers.
ceph/demo:tag-build-master-hammer-u... - 07:02 PM Bug #20527: v2 presigned URLs don't work with radosgw.
- Hello!
My team is trying to update from Hammer to Jewel, and we believe we have run into this issue. We are testi... - 05:21 PM Bug #20686 (Pending Backport): rgw hangs in RGWRealmReloader::reload on SIGHUP
- 03:18 PM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- OK we fetch the storage stats only for the bucket stats not the user stats.
The failure is for the user stats, makin... - 02:20 PM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- Can you provide rgw logs? (debug_rgw = 20)
From the code it should have return false on can_use_cache_stats and fetc... - 01:42 PM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- Yes it is reproducible on master as well, sorry if the affected versions field has misled you.
- 12:03 PM Bug #20661: With RGWs configured in a load balancer, quota stats cache doesn't work
- Dcan you reproduce it on newer ceph versions?
- 02:44 PM Bug #20289 (Resolved): "failed to list reshard log entries" spams log file
- 01:47 PM Bug #20757 (Fix Under Review): rgw: RadosGW leaks memory during Swift Static Website's error hand...
- PR: https://github.com/ceph/ceph/pull/16531.
- 01:01 PM Bug #20757 (Resolved): rgw: RadosGW leaks memory during Swift Static Website's error handling
- ...
- 01:10 PM Bug #20663: Segmentation fault when exporting rgw bucket in nfs-ganesha
- Matt Benjamin wrote:
> arg, it's...bitwise, sorry, will update
>
> I'm surprised this isn't universally hit.
> ... - 08:57 AM Bug #20756 (In Progress): radosgw daemon crash when service is restarted during lifecycle processing
- PR Created: https://github.com/ceph/ceph/pull/16495
- 08:50 AM Bug #20756 (Closed): radosgw daemon crash when service is restarted during lifecycle processing
- radosgw daemon crash when service is restarted during lifecycle processing:
2017-07-24 00:00:19.854742 7fd4ca9da70... - 08:47 AM Bug #20755 (Closed): radosgw crash when service is restarted during lifecycle processing
- radosgw crash when service is restarted during lifecycle processing:
2017-07-24 00:00:19.854742 7fd4ca9da700 -1 ...
07/22/2017
- 01:48 AM Bug #19956: radosgw Segmentation fault when service is restarted during lifecycle processing
- wei qiaomiao wrote:
> I think this PR: http://tracker.ceph.com/issues/19956 will help you.
The link just goes bac... - 12:31 AM Bug #19956: radosgw Segmentation fault when service is restarted during lifecycle processing
- I think this PR: http://tracker.ceph.com/issues/19956 will help you.
07/21/2017
- 02:36 PM Bug #20570: Ceph - Keystone Implicit Tenants
- Ross Martyn wrote:
> Discussions with a developer at my end suggested it could be possible to use something like the... - 02:00 PM Bug #20570: Ceph - Keystone Implicit Tenants
- Discussions with a developer at my end suggested it could be possible to use something like the following (based on a...
- 02:53 AM Feature #20733 (New): RGW bucket limits
- our reqirements:
10w small files/bucket, file size about 10Kb
We need 2w~20Wbucket satisfy our file store.
But... - 12:33 AM Bug #20612: radosgw ceases responding to list requests
- I've since found another solution for my storage needs and allocated my hardware to that, so I can't reproduce I'm af...
07/20/2017
- 08:34 PM Backport #20346: jewel: rgw: meta sync thread crash at RGWMetaSyncShardCR
- Backporting note: after cherry-picking the main master fix, also cherry-pick the follow-on fix https://github.com/cep...
- 08:30 PM Backport #20729 (Rejected): kraken: rgw: multipart parts on versioned bucket create versioned buc...
- 08:30 PM Backport #20728 (Resolved): jewel: rgw: multipart parts on versioned bucket create versioned buck...
- https://github.com/ceph/ceph/pull/17278
- 08:29 PM Backport #20727 (Rejected): kraken: rgw: user quota did not work well on multipart upload
- 08:29 PM Backport #20726 (Resolved): jewel: rgw: user quota did not work well on multipart upload
- https://github.com/ceph/ceph/pull/17277
- 08:29 PM Backport #20725 (Rejected): kraken: Content-MD5 header is not validated with POST uploads
- 08:29 PM Backport #20724 (Rejected): jewel: Content-MD5 header is not validated with POST uploads
- 08:28 PM Bug #20663: Segmentation fault when exporting rgw bucket in nfs-ganesha
- luminous backports haven't started yet
- 12:25 PM Bug #20663 (Pending Backport): Segmentation fault when exporting rgw bucket in nfs-ganesha
- arg, it's...bitwise, sorry, will update
I'm surprised this isn't universally hit.
https://github.com/ceph/ceph... - 08:28 PM Backport #20721 (Rejected): kraken: multisite: RGWPeriodPuller does not call RGWPeriod::reflect()...
- 08:28 PM Backport #20720 (Resolved): jewel: multisite: RGWPeriodPuller does not call RGWPeriod::reflect() ...
- https://github.com/ceph/ceph/pull/17167
- 08:28 PM Backport #20719 (Resolved): jewel: rgw: Truncated objects
- https://github.com/ceph/ceph/pull/16708
https://github.com/ceph/ceph/pull/17166 - 08:28 PM Backport #20718 (Rejected): kraken: rgw: Truncated objects
- 08:28 PM Backport #20717 (Rejected): hammer: rgw: Truncated objects
- 08:27 PM Backport #20716 (Rejected): kraken: rgw: radosgw-admin data sync run crash
- 08:27 PM Backport #20715 (Resolved): jewel: rgw: radosgw-admin data sync run crash
- https://github.com/ceph/ceph/pull/17165
- 08:27 PM Backport #20713 (Rejected): kraken: rgw: not initialized pointer cause rgw crash with ec data pool
- 08:27 PM Backport #20712 (Resolved): jewel: rgw: not initialized pointer cause rgw crash with ec data pool
- https://github.com/ceph/ceph/pull/17164
- 08:27 PM Backport #20711 (Rejected): kraken: Segmentation fault when exporting rgw bucket in nfs-ganesha
- 08:27 PM Backport #20710 (Rejected): kraken: radosgw-admin: bucket rm with --bypass-gc and without --purge...
- 08:27 PM Backport #20709 (Resolved): jewel: radosgw-admin: bucket rm with --bypass-gc and without --purge-...
- https://github.com/ceph/ceph/pull/17159
- 07:11 PM Bug #20708 (Resolved): rgw: policy cannot parse Condition with IfExists
- The s3test test_bucket_policy_set_condition_operator_end_with_IfExists from https://github.com/ceph/s3-tests/pull/167...
- 06:07 PM Bug #20612 (Need More Info): radosgw ceases responding to list requests
- 06:07 PM Bug #20612: radosgw ceases responding to list requests
- could we have radosgw logs at --debug-rgw=20 --debug-ms=1, please?
- 06:04 PM Bug #19285 (Pending Backport): rgw: user quota did not work well on multipart upload
- 06:01 PM Bug #19870 (In Progress): rgw: bytes_send and bytes_recv in the msg of usage show returning is 0 ...
- 06:01 PM Bug #17964 (Pending Backport): rgw: multipart parts on versioned bucket create versioned bucket i...
- 05:56 PM Bug #20423 (Pending Backport): rgw: radosgw-admin data sync run crash
- 05:56 PM Bug #20201 (In Progress): radosgw refuses upload when Content-Type missing from POST policy
- 05:54 PM Bug #19904: rgw: Objects of bucket with '_' fail to sync in multisite env
- normal prio because have workaround (relaxed names)
- 05:52 PM Bug #20668: rgw multisite: cannot sync objects encrypted with SSE-C
- 05:52 PM Bug #20671: rgw multisite: objects encrypted with SSE-KMS are stored unencrypted in target zone
- 05:52 PM Bug #20542 (Pending Backport): rgw: not initialized pointer cause rgw crash with ec data pool
- 05:50 PM Bug #19739 (Pending Backport): Content-MD5 header is not validated with POST uploads
- 05:48 PM Bug #19816 (Resolved): multisite: set_latest_epoch not atomic
- 05:46 PM Bug #19817 (Pending Backport): multisite: RGWPeriodPuller does not call RGWPeriod::reflect() on n...
- 05:43 PM Bug #20107 (Pending Backport): rgw: Truncated objects
- 03:35 PM Bug #20107: rgw: Truncated objects
- merged https://github.com/ceph/ceph/pull/15673
- 05:40 PM Bug #20490 (Need More Info): rgw: can not list buckets when enable s3 website hosting and use domain
- 05:40 PM Bug #20177 (In Progress): RGW lifecycle not expiring objects due to permissions on lc pool
- 05:38 PM Bug #20177: RGW lifecycle not expiring objects due to permissions on lc pool
- It is the same as the reshard error, we should init to namespace.
The same applys to the roles pool - 03:39 PM Feature #16191: rgw:get usage S3 api extend
- merged https://github.com/ceph/ceph/pull/14287
- 02:38 PM Bug #20100 (Resolved): get wrong content when download object with specific range when compressio...
- 02:38 PM Backport #20268 (Resolved): kraken: get wrong content when download object with specific range wh...
- 11:18 AM Bug #20541 (Closed): rgw: s3 put obj hangs with ec data pool on filestore
- 10:37 AM Feature #12102: Request for increased logging in RGW, for CivetWeb.
- The request for a status page is handled upstream at https://github.com/civetweb/civetweb/issues/243 and seems to hav...
- 09:06 AM Bug #20696 (Resolved): radosgw doesn't start with civetweb handlerin Debian Stretch
- Radosgw doesn't start due to incompatibility between civetweb and openssl version >= 1.1 . There is a issue in civetw...
Also available in: Atom