Activity
From 06/05/2018 to 07/04/2018
07/04/2018
- 12:38 PM Bug #19413: Cannot delete some snapshots after upgrade from jewel to kraken
- Just seen this issue again, as above FFFF in header info. I was unable to remove with Luminous rbd client (12.2.5), b...
- 10:00 AM Bug #24433: caps doesn't support mix of "profile rbd" and "allow rw"
- Fabien: please can you confirm which version you were testing with?
- 07:12 AM Backport #24735 (In Progress): luminous: order rbdmap.service before remote-fs-pre.target
- 07:10 AM Backport #24734 (In Progress): mimic: order rbdmap.service before remote-fs-pre.target
07/02/2018
- 05:02 PM Backport #24742: jewel: CLI unit formatting tests are broken
- http://pulpito.ceph.com/teuthology-2018-07-02_01:50:02-upgrade:client-upgrade-luminous-mimic-distro-basic-smithi/
ht... - 04:59 PM Backport #24742 (Need More Info): jewel: CLI unit formatting tests are broken
- Waiting for Yuri to provide logs of jewel test failures that this is supposed to fix.
- 04:52 PM Backport #24742 (Resolved): jewel: CLI unit formatting tests are broken
- https://github.com/ceph/ceph/pull/22913
- 04:57 PM Backport #24740 (In Progress): luminous: CLI unit formatting tests are broken
- 04:51 PM Backport #24740 (Resolved): luminous: CLI unit formatting tests are broken
- https://github.com/ceph/ceph/pull/22911
- 04:53 PM Backport #24741 (Resolved): mimic: CLI unit formatting tests are broken
- 04:52 PM Backport #24741 (Resolved): mimic: CLI unit formatting tests are broken
- https://github.com/ceph/ceph/pull/22260
- 04:52 PM Backport #24734 (New): mimic: order rbdmap.service before remote-fs-pre.target
- 04:38 PM Backport #24734 (Resolved): mimic: order rbdmap.service before remote-fs-pre.target
- 04:36 PM Backport #24734 (Resolved): mimic: order rbdmap.service before remote-fs-pre.target
- https://github.com/ceph/ceph/pull/22843
- 04:51 PM Bug #24733 (Pending Backport): CLI unit formatting tests are broken
- 04:36 PM Bug #24733 (Resolved): CLI unit formatting tests are broken
- Fixed in master by https://github.com/ceph/ceph/pull/22230
- 04:36 PM Backport #24735 (Resolved): luminous: order rbdmap.service before remote-fs-pre.target
- https://github.com/ceph/ceph/pull/22844
- 12:38 PM Bug #24713 (Pending Backport): order rbdmap.service before remote-fs-pre.target
06/29/2018
- 02:44 PM Bug #24713 (Fix Under Review): order rbdmap.service before remote-fs-pre.target
- https://github.com/ceph/ceph/pull/22769
- 02:35 PM Bug #24713 (Resolved): order rbdmap.service before remote-fs-pre.target
- 06:04 AM Backport #24499 (In Progress): mimic: invalid object map when deep copying a resized (expanded) c...
- https://github.com/ceph/ceph/pull/22768
06/28/2018
- 08:09 PM Backport #24698 (Resolved): mimic: ImageCtx.cc: 160: FAILED assert(image_watcher == __null) when ...
- https://github.com/ceph/ceph/pull/22943
- 03:05 PM Bug #24688: [rbd-mirror] optionally pull monitor addresses and CephX key from mon-based config
- ... and update ceph-ansible to ensure that the rbd-mirror user caps can read from the keys.
- 03:05 PM Bug #24688: [rbd-mirror] optionally pull monitor addresses and CephX key from mon-based config
- ... also ensure that, by default, standard users cannot read these config settings from the mon-config.
- 03:04 PM Bug #24688 (Resolved): [rbd-mirror] optionally pull monitor addresses and CephX key from mon-base...
- This will be used by the dashboard + orchestrator to build out RBD mirroring in containers (where it's not easy to in...
- 06:16 AM Backport #24496 (In Progress): mimic: "invalid object map" flag may be not stored on disk
- https://github.com/ceph/ceph/pull/22754
- 06:14 AM Backport #24498 (In Progress): luminous: "invalid object map" flag may be not stored on disk
- https://github.com/ceph/ceph/pull/22753
06/27/2018
- 10:01 PM Bug #24528: Missing snapshot after upgrade from Kraken (11.2.0) to Luminous (12.2.5)
- Thanks -- you are hitting issue #19413. After you upgraded your OSDs to v11.2.0, a pre-Kraken client created a snapsh...
- 03:26 PM Bug #24433: caps doesn't support mix of "profile rbd" and "allow rw"
- Note that pool tag-based caps are not supported in Luminous (added in Mimic). I tested your caps under the master bra...
- 02:36 PM Bug #24433: caps doesn't support mix of "profile rbd" and "allow rw"
- The lists of caps are supposed to be additive, so it's a bug if this wasn't working.
- 03:17 PM Subtask #24411 (Resolved): [namespaces] rbd CLI should support "--namespace" optional and "[pool-...
- 02:57 PM Bug #24675 (Fix Under Review): image create request should validate data pool for self-managed sn...
- PR: https://github.com/ceph/ceph/pull/22737
- 11:53 AM Bug #24675 (Resolved): image create request should validate data pool for self-managed snapshot s...
- On image create we validate metadata pool for self-managed RBD snapshot support, while we should validate data pool i...
- 12:23 PM Subtask #24610 (In Progress): [namespaces] krbd should support namespaces
- 08:42 AM Subtask #24558 (Resolved): [namespaces] update create image state machine to support namespaces
06/26/2018
- 11:18 PM Bug #24528: Missing snapshot after upgrade from Kraken (11.2.0) to Luminous (12.2.5)
- Here is the output
```
[root@os-controller01 ~]$ rados -p glance-images listomapvals rbd_header.6a7eac2eb141f2
f... - 08:41 PM Subtask #24669 (New): [namespaces] validate namespaces for groups, journals, and data objects
- 08:40 PM Bug #24668: [test] qemu-iotests tests fails under latest Ubuntu kernel
- ...
- 08:40 PM Bug #24668 (Resolved): [test] qemu-iotests tests fails under latest Ubuntu kernel
- http://pulpito.ceph.com/jdillaman-2018-06-26_15:43:34-rbd-wip-jd-testing-distro-basic-smithi/2707488
06/23/2018
- 01:38 PM Bug #24637 (Pending Backport): ImageCtx.cc: 160: FAILED assert(image_watcher == __null) when open...
06/22/2018
- 06:06 PM Bug #24637 (Fix Under Review): ImageCtx.cc: 160: FAILED assert(image_watcher == __null) when open...
- PR: https://github.com/ceph/ceph/pull/22676
- 05:48 PM Bug #24637 (Resolved): ImageCtx.cc: 160: FAILED assert(image_watcher == __null) when opening none...
- If snap_set fails in image::OpenRequest, it needs to close the already opened image before returning the error. Other...
- 04:23 PM Bug #24634: librbd: block_name_prefix is not created randomly
- fix pr: https://github.com/ceph/ceph/pull/22675
- 04:12 PM Bug #24634 (Resolved): librbd: block_name_prefix is not created randomly
- Hi, I found that block_name_prefix is not crated rondomly.
test env:
ceph --version
ceph version 12.2.5 (cad9198... - 02:45 PM Subtask #24558 (Fix Under Review): [namespaces] update create image state machine to support name...
- *PR*: https://github.com/ceph/ceph/pull/22673
- 12:47 AM Backport #24390 (In Progress): mimic: [rbd-mirror] daemon failed to stop on active/passive test case
- https://github.com/ceph/ceph/pull/22667
06/21/2018
- 05:53 PM Subtask #24610 (Resolved): [namespaces] krbd should support namespaces
- 05:52 PM Subtask #24609 (Resolved): [namespaces] rbd-nbd should support namespaces
- 05:52 PM Subtask #24608 (Resolved): [namespaces] rbd-ggate should support namespaces
- 01:31 PM Backport #24388 (In Progress): mimic: Allow removal of RBD images even if the journal is corrupt
- https://github.com/ceph/ceph/pull/22662
- 08:03 AM Subtask #24410 (Resolved): [namespaces] management APIs and CLI commands
06/20/2018
- 03:25 PM Bug #23853: Inefficent implementation - very long query time for "rbd ls -l" queries
- I don't see any long CPU touch-time hotspots in your perf result. I can only imagine you are seeing latency artifacts...
- 07:38 AM Bug #23853: Inefficent implementation - very long query time for "rbd ls -l" queries
- No, enabling/disabling makes no difference. The execution times are identical.
I added the perf results.... - 12:51 PM Backport #24596 (Resolved): mimic: yet another case when deep copying a clone may result in inval...
- https://github.com/ceph/ceph/pull/22894
06/19/2018
- 09:32 PM Bug #24545 (Pending Backport): yet another case when deep copying a clone may result in invalid o...
- 07:49 PM Bug #24528 (Need More Info): Missing snapshot after upgrade from Kraken (11.2.0) to Luminous (12....
- @Remi: can you please provide the output from the following command?...
- 06:04 PM Bug #23853: Inefficent implementation - very long query time for "rbd ls -l" queries
- @Marc: was it much faster w/ the RBD cache disabled? If so, this issue has been addressed in Mimic since we automatic...
- 05:49 PM Bug #24479 (Rejected): import_export.sh fails on master
- @Kefu: this seems like it's a bug in your RADOS test since it installed v12.2.5 (sha1 cad919881333ac92274171586c827e0...
- 05:22 PM Bug #24106 (Need More Info): fail to create rbd device when the clusters' health is ok
- It appears your client cannot connect to host 192.168.159.140, port 6800. If you run 'rbd create disk01 --size 512 --...
06/18/2018
- 10:46 PM Subtask #24558 (Resolved): [namespaces] update create image state machine to support namespaces
- 10:45 PM Subtask #24410 (Fix Under Review): [namespaces] management APIs and CLI commands
- *PR*: https://github.com/ceph/ceph/pull/22608
06/16/2018
- 11:25 AM Bug #24545 (Fix Under Review): yet another case when deep copying a clone may result in invalid o...
- PR: https://github.com/ceph/ceph/pull/22587
- 10:42 AM Bug #24545 (Resolved): yet another case when deep copying a clone may result in invalid object map
- The case:
clone
discard an object at offset X
create snap1
shrink to the size less then X
create sna...
06/15/2018
- 03:46 AM Bug #24528 (Closed): Missing snapshot after upgrade from Kraken (11.2.0) to Luminous (12.2.5)
- I just upgraded from Kraken to Luminous. But after the upgrade, I started noticing that openstack-compute-node servic...
06/14/2018
- 08:15 PM Bug #24102: snapshot of RBD image is found to be all zero.
- I cannot reproduce what you are seeing. Can you please provide exact CLI commands and CLI output?
06/13/2018
- 08:31 PM Backport #24519 (Resolved): mimic: [rbd-mirror] simple image map policy doesn't always level-load...
- https://github.com/ceph/ceph/pull/22892
- 08:22 PM Feature #24065 (Resolved): [fast-diff] interlock object-map/fast-diff features together
- 08:21 PM Bug #24161 (Pending Backport): [rbd-mirror] simple image map policy doesn't always level-load ins...
- 08:18 PM Bug #24516 (Resolved): [rbd-mirror] object map is getting invalidated during rbd-mirror-fsx-worku...
- ...
- 05:21 PM Bug #23955 (Resolved): librbd::Watcher's handle_rewatch_complete might fire after object destroyed
- 05:20 PM Backport #23985 (Resolved): luminous: librbd::Watcher's handle_rewatch_complete might fire after ...
- 05:20 PM Backport #24084 (Resolved): luminous: [rbd-mirror] bootstrap should not raise -EREMOTEIO if local...
- 05:19 PM Backport #24086 (Resolved): luminous: [rbd-mirror] potential races during PoolReplayer shut-down
- 02:51 PM Backport #23607 (Resolved): luminous: import-diff failed: (33) Numerical argument out of domain -...
- 02:50 PM Backport #23640 (Resolved): luminous: rbd: import with option --export-format fails to protect sn...
- 02:48 PM Backport #24155 (Resolved): mimic: [rbd-mirror] potential deadlock when running asok 'flush' command
- 02:44 PM Backport #24391 (In Progress): mimic: [rbd-mirror] entries_behind_master will not be zero after m...
- 02:37 AM Bug #24102: snapshot of RBD image is found to be all zero.
- Yes, this is it.
Jason Dillaman wrote:
> So you are saying that if you remove image X via 'rbd rm <base-tier-po...
06/12/2018
- 02:02 PM Bug #24506 (New): [qemu] use 'rbd_open_read_only' when media is flagged as read-only
- 12:50 PM Bug #24102: snapshot of RBD image is found to be all zero.
- So you are saying that if you remove image X via 'rbd rm <base-tier-pool>/<image-name>', running "ceph osd pool ls de...
- 06:44 AM Bug #24102: snapshot of RBD image is found to be all zero.
- This issue can be triggered by deleting a RBD image from a cache tiering pool. But the probability of the occurrence ...
- 08:01 AM Backport #24499 (Resolved): mimic: invalid object map when deep copying a resized (expanded) clone
- https://github.com/ceph/ceph/pull/22768
- 08:01 AM Backport #24498 (Resolved): luminous: "invalid object map" flag may be not stored on disk
- https://github.com/ceph/ceph/pull/22753
- 08:01 AM Backport #24497 (Closed): jewel: "invalid object map" flag may be not stored on disk
- 08:00 AM Backport #24496 (Resolved): mimic: "invalid object map" flag may be not stored on disk
- https://github.com/ceph/ceph/pull/22754
06/11/2018
- 02:17 PM Bug #24008 (Resolved): [rbd-mirror] potential races during PoolReplayer shut-down
- 02:16 PM Backport #23985: luminous: librbd::Watcher's handle_rewatch_complete might fire after object dest...
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/21938
merged - 02:16 PM Backport #24084: luminous: [rbd-mirror] bootstrap should not raise -EREMOTEIO if local image stil...
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/22142
merged - 02:15 PM Backport #24086: luminous: [rbd-mirror] potential races during PoolReplayer shut-down
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/22172
merged - 12:48 PM Bug #24102: snapshot of RBD image is found to be all zero.
- OK, then it's not enabled.
At this point, I don't have enough information to assist trying to determine how your s... - 12:36 PM Bug #24102: snapshot of RBD image is found to be all zero.
- How to check whether the data-pool feature is enabled?
I use the command "rbd info reppool/<image-id>" on the imag... - 12:12 PM Bug #24102: snapshot of RBD image is found to be all zero.
- Are you using the RBD data-pool feature on this image? The initial version of Luminous had a bug where the snapshots ...
- 09:57 AM Bug #24102: snapshot of RBD image is found to be all zero.
- On the OSD side, the snapshot is marked as "removed" (in the removed_snaps set). So the find_object_context function ...
06/10/2018
- 07:01 AM Bug #24102: snapshot of RBD image is found to be all zero.
- I fetch the rbd_object_map for the image and the snapshot, the rbd_object_map(s) of them are different.
The comman...
06/09/2018
- 03:32 PM Bug #24399 (Pending Backport): invalid object map when deep copying a resized (expanded) clone
- 03:32 PM Bug #24434 (Pending Backport): "invalid object map" flag may be not stored on disk
- 12:35 PM Bug #24479 (Rejected): import_export.sh fails on master
- ...
- 11:42 AM Bug #24221 (Resolved): "rbd/import_export.sh" errors in upgrade:client-upgrade-luminous-mimic upg...
- 11:19 AM Backport #24476 (Resolved): mimic: "rbd trash purge --threshold" should support data pool
- https://github.com/ceph/ceph/pull/22891
06/08/2018
- 12:52 PM Bug #24102: snapshot of RBD image is found to be all zero.
- Yes, I am using cache tiering.
The version of ceph is 12.2.2.
The attachment is the log of running the command "...
06/07/2018
- 12:04 PM Backport #23607: luminous: import-diff failed: (33) Numerical argument out of domain - if image s...
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/21316
merged - 12:03 PM Backport #24156: luminous: [rbd-mirror] potential deadlock when running asok 'flush' command
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/22180
merged - 12:01 PM Backport #24378: luminous: [rbd-mirror] entries_behind_master will not be zero after mirror over
- Jason Dillaman wrote:
> https://github.com/ceph/ceph/pull/22370
merged - 12:07 AM Bug #24425: create iscsi gateway stop with "The first gateway defined must be the local machine"
- Add 2nd gateway on the host itself works!
06/06/2018
- 09:03 PM Bug #24434 (Fix Under Review): "invalid object map" flag may be not stored on disk
- PR: https://github.com/ceph/ceph/pull/22444
- 01:27 PM Bug #24434 (Resolved): "invalid object map" flag may be not stored on disk
- The case:
- Create an image with object map enabled.
- Make the image object map smaller than expected (e.g. usin... - 09:44 AM Bug #24433 (Rejected): caps doesn't support mix of "profile rbd" and "allow rw"
- I try to create an user who has capabilites to access to differents rbd pools and a cephfs pool.
I put the caps like...
06/05/2018
- 08:00 PM Feature #23398 (In Progress): [clone v2] auto-delete trashed snapshot upon release of last child
- 07:17 PM Bug #24399 (Fix Under Review): invalid object map when deep copying a resized (expanded) clone
- PR: https://github.com/ceph/ceph/pull/22415
- 05:39 PM Bug #24425: create iscsi gateway stop with "The first gateway defined must be the local machine"
- next to add 2nd gateway failed:
/iscsi-target...-igw/gateways> create node0019 192.168.57.17 skipchecks=true
OS v... - 05:26 PM Bug #24425: create iscsi gateway stop with "The first gateway defined must be the local machine"
- Changed the "ceph-gw-1" to the localhostname "node0018" make it work!
/iscsi-target...-igw/gateways> create node... - 05:16 PM Bug #24425 (Closed): create iscsi gateway stop with "The first gateway defined must be the local ...
- [root@node0018-isci-gateway ~]# gwcli
/iscsi-target...-igw/gateways> ls
o- gateways ..................................
Also available in: Atom