Activity
From 04/24/2016 to 05/23/2016
05/22/2016
- 08:31 PM Bug #15984 (Resolved): ceph-osd-prestart.sh contains Upstart-specific code
- Specifically: https://github.com/ceph/ceph/blob/v10.2.1/src/ceph-osd-prestart.sh#L48-L49
The Upstart Cookbook says...
05/18/2016
- 05:10 PM Bug #14839: systemctl stop ceph.target doesn't stop ceph
- This is not fixed in ceph master as well, the behaviour is diffent based on the node which has mon+osd role vs node w...
- 11:07 AM Fix #15419: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time-sync.target"
- Not sure if this is just "cosmetic", or if it might cause problems (dependency cycles?).
- 10:42 AM Fix #15419: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time-sync.target"
- Hm, should have read the manpage. Thanks for pointing me to it. I will modify it so it looks like this:...
- 10:33 AM Fix #15419: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time-sync.target"
- Before this change we had:...
- 07:28 AM Fix #15419: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time-sync.target"
- The "Wants=time-sync.target" is wrong here according to 'man systemd.special':
"A number of special system targets... - 04:08 AM Bug #15907: 10.2.1 more pidfile permission problems
- What you did (enabling "everything") is the right way to go.
If an instantiated service is disabled (e.g. due to ... - 03:54 AM Bug #15907: 10.2.1 more pidfile permission problems
- arrrgh, I can't edit my comments. that last one was for node athena, not titan, but you get the idea.
I'm going fo... - 03:44 AM Bug #15907: 10.2.1 more pidfile permission problems
- I copied the missing files from github and still nothing after enabling only the target files. I have no clue if this...
- 02:38 AM Bug #15907: 10.2.1 more pidfile permission problems
- glad I'm not losing my mind here. I thought this fix was going to be in 10.2.1? But apparently it isn't?
fighting ... - 02:18 AM Bug #15907 (Duplicate): 10.2.1 more pidfile permission problems
- Sorry, I wasn't aware of #15573 - you're right; this really is a bug. Changing status from "Rejected" to "Duplicate"....
05/17/2016
- 09:00 PM Bug #15907: 10.2.1 more pidfile permission problems
- I read the release notes regularly and in detail, I follow ceph VERY close and have a couple of successful installati...
- 07:19 PM Bug #15907 (Rejected): 10.2.1 more pidfile permission problems
- I'm rejecting this, because it's not a bug. Please read the 10.2.0 release notes. Esapecially this section: http://do...
- 04:44 PM Bug #15907: 10.2.1 more pidfile permission problems
- could you elaborate on what is disturbing about /etc/init.d/ceph? All I did after upgrading to 10.2.1 was to notice t...
- 10:38 AM Bug #15907: 10.2.1 more pidfile permission problems
- BTW this line is disturbing:...
- 10:35 AM Bug #15907 (Need More Info): 10.2.1 more pidfile permission problems
- Please provide: your full @ceph.conf@, platform (distro/version), and output of the following commands:...
- 04:37 AM Bug #15907 (Duplicate): 10.2.1 more pidfile permission problems
- Previously had pidfile permission problems because my config was lacking the following (resolved with http://tracker....
- 02:16 PM Bug #15908 (Rejected): Jewel packages for Ubuntu trusty (amd64 arch)?
- Hello,
I have been trying to evaluate Ceph Jewel using Debian packages on Ubuntu trusty (amd64 architecture).
A...
05/16/2016
- 05:02 PM Bug #15583 (New): systemd warns about TasksMax= setting on older distros
- This still strikes me as a poor usability experience. We should eliminate the warning to the user, if we can help it....
- 08:19 AM Backport #15894 (In Progress): jewel: install-deps.sh broken on SUSE if systemd-rpm-macros not in...
- https://github.com/ceph/ceph/pull/8938
- 08:10 AM Backport #15894 (Resolved): jewel: install-deps.sh broken on SUSE if systemd-rpm-macros not insta...
- https://github.com/ceph/ceph/pull/8938
- 07:59 AM Bug #15627 (Pending Backport): install-deps.sh broken on SUSE if systemd-rpm-macros not installed
05/13/2016
- 08:21 AM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- @Ken In light of #15874 I realized that it's not enough to do the recursive chown at boot time. On package upgrade th...
- 07:03 AM Bug #15874: Upon hammer->jewel upgrade, OSD cannot access journal device until after reboot
- There is a concern that running @udevadm trigger@ unconditionally could cause "churn" on a node with many devices.
05/12/2016
- 09:44 PM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- Exactly :((((((
- 08:58 PM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- @Yuri: IIRC the "install" and "ceph" tasks are not using systemd. Perhaps that is the reason why the upgrade suite is...
- 08:13 PM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- @Nathan - Can we/do we want to add ceph-disk ops into standard upgrade suites ?
- 09:34 PM Bug #15876 (New): rpm installation might result in multiple "ceph" users/groups with different ui...
- This is due to the use of the "-o" option in the useradd/groupadd lines, introduced by https://github.com/ceph/ceph/c...
- 08:05 PM Bug #15874 (New): Upon hammer->jewel upgrade, OSD cannot access journal device until after reboot
- Scenario: hammer cluster being upgraded to jewel. Before upgrade, the permissions/ownership of the journal device are...
- 07:46 PM Bug #15869: ceph gid mismatch on upgrade from hammer with pre-existing ceph user (SUSE)
- Updated the PR to use the Debian semantics (usermod -g ceph unconditionally whether user is created or not)
- 05:26 PM Bug #15869 (Fix Under Review): ceph gid mismatch on upgrade from hammer with pre-existing ceph us...
- *master PR*: https://github.com/ceph/ceph/pull/9106
- 05:20 PM Bug #15869 (Resolved): ceph gid mismatch on upgrade from hammer with pre-existing ceph user (SUSE)
- Scenario: upgrade from hammer to jewel on SUSE, pre-existing ceph user with uid 1000 and gid 100, pre-existing ceph g...
- 07:16 PM Bug #15872: Removing ceph packages should remove 'ceph' user and 'ceph' group as well
- > ( hammer 0.94.4 + )
I *think* the creation of ceph user/group was added in Infernalis (9.1.0) by https://github.... - 06:48 PM Bug #15872 (Fix Under Review): Removing ceph packages should remove 'ceph' user and 'ceph' group ...
- 1) Install ceph and Uninstall ( hammer 0.94.4 + )
2) User 'ceph' and group 'ceph' created by init still exist
Thi... - 03:32 PM Backport #15662 (Resolved): jewel: deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in /e...
05/11/2016
- 12:53 AM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- Agreed on ceph-devel to do the recursive chown in ceph-disk instead of in the OSD itself: http://comments.gmane.org/g...
05/09/2016
05/05/2016
- 02:44 PM Backport #15744 (In Progress): jewel: rpm: SELinux relabel does not work on systems using CIL
- 02:41 PM Backport #15744 (Resolved): jewel: rpm: SELinux relabel does not work on systems using CIL
- https://github.com/ceph/ceph/pull/8938
- 02:40 PM Bug #15725: rpm: SELinux relabel does not work on systems using CIL
- *master PR*: https://github.com/ceph/ceph/pull/8923
- 12:56 PM Bug #15725 (Pending Backport): rpm: SELinux relabel does not work on systems using CIL
- This should back-port cleanly once #13445 is back-ported.
- 09:59 AM Bug #15726: ceph-deploy install bombs out with: usermod: user ceph is currently used by process 1...
- OK, found a way out I think: Need to run ceph-deploy per-host, will bomb out half-way, then run:
ssh root@host env... - 09:13 AM Backport #15742 (In Progress): jewel: rpm: enable IB/RDMA support
- 07:44 AM Backport #15742 (Resolved): jewel: rpm: enable IB/RDMA support
- https://github.com/ceph/ceph/pull/8938
- 07:41 AM Feature #15472 (Pending Backport): rpm: enable IB/RDMA support
05/04/2016
- 09:30 PM Backport #15739 (In Progress): jewel: ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewe...
- 07:37 PM Backport #15739 (Resolved): jewel: ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewel a...
- https://github.com/ceph/ceph/pull/8938
- 07:33 PM Bug #15486: drop init scripts from packaging
- https://github.com/ceph/ceph/pull/8720 removes all references to the init scripts from the rpm packaging
- 07:31 PM Fix #13445 (Pending Backport): ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewel and a...
- 01:51 PM Fix #13445: ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewel and above
- Note to backporter: cherry-pick https://github.com/ceph/ceph/pull/8926 first, then https://github.com/ceph/ceph/pull/...
- 05:30 PM Feature #15733: ceph-osd should chown OSD data when --setuser is specified
- +1 , will be very useful
- 05:26 PM Feature #15733 (New): ceph-osd should chown OSD data when --setuser is specified
- Currently users that upgrade from Hammer have to run a large "chown" operation (or series of operations) by hand.
... - 01:08 PM Bug #15587 (Resolved): deb: wrong /etc/default/ceph/ceph location
- 12:26 PM Bug #15726: ceph-deploy install bombs out with: usermod: user ceph is currently used by process 1...
- Later I found out there are more problems with the documentation. It says jewel in the URL, but it seems to be just c...
- 12:07 PM Bug #15726 (New): ceph-deploy install bombs out with: usermod: user ceph is currently used by pro...
- I cannot install cep using the documentation. The documentation recommends adding a ceph user, and preparing password...
- 08:46 AM Bug #15725 (Resolved): rpm: SELinux relabel does not work on systems using CIL
- The SELinux userspace utilities stopped providing versions when they
switched to CIL language. We need to use a diff...
05/01/2016
- 03:53 PM Backport #15662 (In Progress): jewel: deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in...
- 06:59 AM Bug #8458 (Resolved): `make check` should call tox tests for ceph-brag, ceph-disk, and ceph
04/29/2016
- 12:07 PM Backport #15662 (Resolved): jewel: deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in /e...
- https://github.com/ceph/ceph/pull/8853
- 12:01 PM Bug #15588 (Pending Backport): deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in /etc/d...
- 06:22 AM Backport #15633 (Resolved): jewel: ceph-{mds,mon,osd} packages need scriptlets with systemd code
- Merged.
- 03:04 AM Bug #15587 (Fix Under Review): deb: wrong /etc/default/ceph/ceph location
04/28/2016
- 09:10 PM Bug #15587: deb: wrong /etc/default/ceph/ceph location
- https://github.com/ceph/ceph/pull/8821
- 09:08 PM Bug #15588: deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in /etc/default/ceph
- https://github.com/ceph/ceph/pull/8823
- 07:08 PM Fix #13445: ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewel and above
- Ken approved jewel backport here: https://github.com/ceph/ceph/pull/8720#issuecomment-215530235
Sage approved jewe... - 07:06 PM Fix #13445 (Fix Under Review): ceph.spec.in: drop support for RHEL<7 and SUSE<1210 in jewel and a...
- *master PR*: https://github.com/ceph/ceph/pull/8720
- 08:25 AM Backport #15606 (In Progress): jewel: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=t...
- 08:20 AM Backport #15633 (In Progress): jewel: ceph-{mds,mon,osd} packages need scriptlets with systemd code
04/27/2016
- 06:58 PM Backport #15633 (Resolved): jewel: ceph-{mds,mon,osd} packages need scriptlets with systemd code
- https://github.com/ceph/ceph/pull/8801
- 06:56 PM Bug #14941 (Pending Backport): ceph-{mds,mon,osd} packages need scriptlets with systemd code
- 03:50 PM Bug #15581 (Duplicate): OSD doesn't start
- 03:49 PM Bug #15581 (In Progress): OSD doesn't start
- I don't know that we absolutely **need** them, but we have them. It is a product of the split of the ceph package int...
- 09:15 AM Bug #15627 (Fix Under Review): install-deps.sh broken on SUSE if systemd-rpm-macros not installed
- *master PR*: https://github.com/ceph/ceph/pull/8782
- 09:11 AM Bug #15627 (Resolved): install-deps.sh broken on SUSE if systemd-rpm-macros not installed
- Running install-deps.sh on SLE12-SP1 without systemd-rpm-macros installed results in a very long and strange error, a...
04/26/2016
- 10:37 PM Bug #15581: OSD doesn't start
- You're right. By default, it's disabled.
*[ceph@octopus ~]$ sudo systemctl is-enabled ceph-mon.target*
disabled
... - 07:52 AM Bug #15581: OSD doesn't start
- The ceph-mon service not starting after reboot most likely means that @ceph-mon.target@ is disabled. It's likely that...
- 07:59 AM Backport #15606 (Resolved): jewel: ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time...
- https://github.com/ceph/ceph/pull/8802
- 07:48 AM Bug #15553 (Resolved): /var/run/ceph permissions are borked after every reboot
- 02:33 AM Fix #15419 (Pending Backport): ceph-{mds,mon,osd,radosgw} systemd unit files need "wants=time-syn...
04/25/2016
- 10:52 PM Bug #15581: OSD doesn't start
- I just built the Ceph cluster using ceph-deploy with stable jewel.
Problem is not only osd but mon as well. Maybe ... - 09:36 AM Bug #15581 (Need More Info): OSD doesn't start
- In what way does the OSD not start? systemctl status says "Active: active (running)"
Also, what distro are you run... - 09:35 AM Bug #15581 (New): OSD doesn't start
- Changing status back to "New" because, as the systemd maintainers just told me, the "Unknown lvalue 'TasksMax' in sec...
- 09:23 PM Bug #15553: /var/run/ceph permissions are borked after every reboot
- pidfile problem is resolved thanks Nathan! You rock!
I created http://tracker.ceph.com/issues/15596 for the ceph-d... - 09:41 AM Bug #15553: /var/run/ceph permissions are borked after every reboot
- As the systemd maintainers just told me, the "Unknown lvalue 'TasksMax' in section 'Service'" is benign and the prese...
- 11:50 AM Bug #13955 (Resolved): /usr/libexec/ceph/ceph-osd-prestart.sh called with incorrect parameters
- 11:49 AM Bug #13955: /usr/libexec/ceph/ceph-osd-prestart.sh called with incorrect parameters
- *PR*: https://github.com/ceph/ceph/pull/8449
- 09:37 AM Bug #15583 (Rejected): systemd warns about TasksMax= setting on older distros
- As the systemd maintainers just told me, the "Unknown lvalue 'TasksMax' in section 'Service'" is benign and the prese...
- 03:58 AM Bug #15588 (Resolved): deb: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES not specified in /etc/default/c...
- Hi,
this PR implement TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=128MB in redhat sysconfig
https://github.com/ceph/ceph/...
04/24/2016
- 05:08 PM Bug #15587 (Resolved): deb: wrong /etc/default/ceph/ceph location
debian rules file is wrong, it's create a /etc/default/ceph directory with a /etc/default/ceph/ceph file.
the co...- 02:13 AM Bug #15583: systemd warns about TasksMax= setting on older distros
- Correction:
@mount -t xfs /dev/disk/by-partlabel/Ceph_OSD.0.XFSdata /srv/ceph/osd/osd.0 -o noatime,nodiratime,logb... - 02:10 AM Bug #15583: systemd warns about TasksMax= setting on older distros
- This can't just be effecting me. after running apt-get update then apt-get dist-upgrade, I'm still in the same boat.
...
Also available in: Atom