Activity
From 09/15/2013 to 10/14/2013
10/14/2013
- 03:34 PM Feature #6020 (In Progress): radosgw-apache opinionated package
- Initial version of package has been created. Still need to sort out installation of config files.
10/11/2013
10/10/2013
- 03:18 PM Bug #6508 (Rejected): ceph-deploy: config push and admin commands broken
- ...
- 03:00 PM Bug #6508: ceph-deploy: config push and admin commands broken
- ...
- 02:58 PM Bug #6508 (Rejected): ceph-deploy: config push and admin commands broken
- test set up: mira025, mira038
dev dumpling version of ceph [] installed and running on mira025 and mira038.
try... - 05:00 AM Bug #6503 (Rejected): ceph-deploy: nosetests fail
- ...
10/09/2013
- 10:14 AM Bug #6489: ceph-deploy: get_nonlocal_ip() should filter ipv6 addrs
- To further elaborate, when I recompiled python so that IPv6 support was properly enabled, the problems that I was hav...
- 09:49 AM Bug #6489: ceph-deploy: get_nonlocal_ip() should filter ipv6 addrs
- I'm the user that orignally reported this issue, and after talking with the Gentoo crowd about the issue, we've disco...
- 08:29 AM Feature #6067: ceph-deploy: make mon create catch common errors
- 08:28 AM Bug #6487 (In Progress): remove pushy from ceph-deploy
10/08/2013
- 02:46 PM Bug #6491 (Closed): During mon create: <type 'exceptions.TypeError'>: 'NoneType' object is not ca...
- ...
- 12:51 PM Bug #6489: ceph-deploy: get_nonlocal_ip() should filter ipv6 addrs
- However, if I add "::1 <hostname>" to my /etc/hosts, and issue getaddrinfo, I get
back v6 entries that look like:
... - 12:32 PM Bug #6489 (Can't reproduce): ceph-deploy: get_nonlocal_ip() should filter ipv6 addrs
- get_nonlocal_ip isn't prepared to see ipv6 addresses back from getaddrinfo(); although
I haven't reproduced it perso... - 09:23 AM Bug #6487 (Closed): remove pushy from ceph-deploy
- The current state of ceph-deploy for remote connections is terrible to work with. While attempting to work on #6486 t...
- 05:31 AM Bug #6485 (Resolved): purgedata should not remove /etc/ceph dir
- It currently removes the whole directory, and it should actually just remove the contents because otherwise nothing w...
10/07/2013
- 12:17 PM Bug #6482 (Resolved): ceph-deploy install on Centos: can't find wget?
- [ceph@ceph-client ~]$ ceph-deploy install ceph-node1
[ceph_deploy.install][DEBUG ] Installing stable version dumplin...
10/02/2013
- 04:02 PM Bug #6461: ceph-deploy should at least issue a warning if there are parser errors reading ceph.conf
- [root@node-1 ~]# python -i
Python 2.6.6 (r266:84292, Jul 10 2013, 22:48:45)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-3)... - 03:59 PM Bug #6461: ceph-deploy should at least issue a warning if there are parser errors reading ceph.conf
- [root@node-1 ~]# vi ceph.conf
[global]
filestore_xattr_use_omap = true
mon_host = 192.168.0.2
fsid = d4991d2b-... - 03:07 PM Bug #6461 (Rejected): ceph-deploy should at least issue a warning if there are parser errors read...
- during ceph-deploy [--overwrite-conf] config push, if there are parser errors, no warning or error is logged.
A us... - 06:58 AM Feature #6365: Package up newer version of Qemu for RHEL & EL6.3 and 6.4
- Please note: qemu-kvm-0.12.1.2-2.355.el6_4.9.src.rpm has been released.
cheers,
--
Thomas@CERN - 12:28 AM Bug #6453 (Won't Fix): libapache2-mod-fastcgi Packages for Debian Squeeze have incorrect dependen...
- The packages provided for libapache2-mod-fastcgi for debian squeeze depend on libc >= 2.14 which is not available for...
10/01/2013
- 12:27 PM Bug #6387 (Resolved): Handle HostNotFound for execnet connection errors
- Created pull request: https://github.com/ceph/ceph-deploy/pull/95
Merged with hash: ffe1fe7
We catch these ex... - 09:05 AM Bug #6428 (Resolved): `ceph-deploy osd` calls missing $PATH
- Merged into ceph-deploy master branch with hash: 0ffd809
09/30/2013
- 02:09 PM Bug #6428 (Fix Under Review): `ceph-deploy osd` calls missing $PATH
- Opened pull request: https://github.com/ceph/ceph-deploy/pull/94
- 01:09 PM Bug #6427 (Resolved): ceph-deply osd activate breaks on error
- Merged into ceph-deploy master branch with hash: 4a9ed622913f82c75849de2e5ebcb20e26fb605f
Migrated the whole funct... - 08:37 AM Bug #6427 (Fix Under Review): ceph-deply osd activate breaks on error
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/93
09/27/2013
- 01:09 PM Feature #5775 (In Progress): create qemu rbd package for rhel 6.5 - qemu-rbd
- 11:30 AM Feature #6067 (In Progress): ceph-deploy: make mon create catch common errors
- 08:02 AM Feature #6067: ceph-deploy: make mon create catch common errors
- Created #6410 so we can use some of the new functionality with cuttlefish too.
- 10:52 AM Feature #6020: radosgw-apache opinionated package
- Proposed package name is radosgw-apache. Also proposing that this be created as a subpackage of the current ceph pac...
- 10:47 AM Feature #6310: Get Dumpling into CentOS Ceph repo
- Waiting to hear back from Centos when 0.67.3 is available in their testing repo. But we probably want 0.67.4 to be t...
- 10:45 AM Feature #5282: Get Dumpling into EPEL
- Ceph-0.67.3 is in testing repos now. Sound like we want 0.67.4 to be the version that into the stable repo.
- 09:39 AM Bug #6410 (Resolved): support older version of ceph for mon_status commands
- Opened pull request https://github.com/ceph/ceph-deploy/pull/92
We are now using the backwards compatible command,... - 09:32 AM Bug #6431 (Duplicate): ceph-deploy should properly delimit commands
- Duplicate of #6423
- 08:54 AM Bug #6431 (Duplicate): ceph-deploy should properly delimit commands
- It is currently hard to tell where ceph-deploy commands start, for example if one is deploying 10 monitors
there is ... - 05:36 AM Bug #6428 (Resolved): `ceph-deploy osd` calls missing $PATH
- There are a few functions left in `ceph_deploy/osd.py` that use the old connecting library and cause issues because $...
- 05:30 AM Bug #6427 (Resolved): ceph-deply osd activate breaks on error
- There are undefined variables for this command that attempt to construct the error messaging...
09/26/2013
- 01:14 PM Feature #6310 (In Progress): Get Dumpling into CentOS Ceph repo
- 67.3 builds under mock on centos
- 01:10 PM Feature #6020: radosgw-apache opinionated package
- 12:57 PM Bug #6410 (Resolved): support older version of ceph for mon_status commands
- All the `mon_status` commands that are currently implemented for dumpling versions of Ceph.
This can totally work ... - 11:30 AM Bug #6345 (Resolved): order of init.d script shutdown sequence
09/25/2013
- 05:42 AM Bug #6387 (Resolved): Handle HostNotFound for execnet connection errors
- Errors like the one below should be properly handled and displayed nicely
back to the user....
09/24/2013
- 01:22 PM Bug #6369 (Resolved): catch the missing public_addr/public_network error for mons
- Merged into ceph-deploy master branch: e67c9d0
- 09:48 AM Bug #6369 (Fix Under Review): catch the missing public_addr/public_network error for mons
- Opened pull request https://github.com/ceph/ceph-deploy/pull/89
- 12:24 PM Feature #6154 (Resolved): ceph-deploy should be able to use an argument "fs-type" to specify the ...
- Merged into ceph-deploy master branch with hash: 6fb89a6
- 09:50 AM Bug #5944: ceph-deploy osd needs to be moved to use the new remote helpers
09/23/2013
- 01:02 PM Feature #6067: ceph-deploy: make mon create catch common errors
- Created #6369 to track (and warn about) the missing public_addr/public_network error
- 08:01 AM Feature #6067: ceph-deploy: make mon create catch common errors
- Created (and resolved) #6314 that addresses the case where --initial and mon starts up but has rank -1 accordingly to...
- 01:01 PM Bug #6369 (Resolved): catch the missing public_addr/public_network error for mons
These are the logical scenarios where we should issue a warning so that a user can fix any potential mon issues:
...- 12:49 PM Bug #6367 (Resolved): ceph-deploy destroy broken
- Merged in ceph-deploy master branch with hash: f551755
The call to resolve the shortname of the host in the remo... - 08:48 AM Bug #6367 (Fix Under Review): ceph-deploy destroy broken
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/88
- 05:22 AM Bug #6367 (Resolved): ceph-deploy destroy broken
- Since the new hostname shortname refactoring was done into place, the remote function
that allows one to destroy a m... - 09:31 AM Feature #6362 (In Progress): move teuthology required stuff off download.ceph.com
- Work is ongoing in the wip-mirror branch:
https://github.com/ceph/teuthology/tree/wip-mirror
This doesn't current... - 08:00 AM Bug #6314 (Resolved): catch case where mon starts up but has rank -1 accordingly to mon_status.
- Merged into ceph-deploy master branch with hash: e66d751
- 07:58 AM Bug #6300 (Resolved): ceph-deploy: mon create prompts for password
- Merged into ceph-deploy master branch with hash: 1c3114a
09/20/2013
- 09:46 PM Feature #6365 (Resolved): Package up newer version of Qemu for RHEL & EL6.3 and 6.4
- Looks like there is a newer version of Qemu from RHEL, which has some security fixes:
ftp://ftp.redhat.com/pub/red... - 03:56 PM Feature #6362 (New): move teuthology required stuff off download.ceph.com
- We want to move stuff off ceph.com as only certain people have access to that and instead move it to a lab machine ev...
- 12:56 PM Bug #6300 (Fix Under Review): ceph-deploy: mon create prompts for password
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/87
09/19/2013
- 11:10 AM Bug #6288 (Resolved): 'ceph-deploy mon create' with --cluster flag fails
- Merged to ceph-deploy master branch with hash: a4b6b6f
- 08:13 AM Bug #6288 (Fix Under Review): 'ceph-deploy mon create' with --cluster flag fails
- Opened pull request: https://github.com/ceph/ceph-deploy/pull/86
- 07:31 AM Bug #6289 (Resolved): new remote connection needs to be able to know about sudo
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/76
Merged into ceph-deploy master branch with hash: ...
09/18/2013
- 01:39 PM Bug #6345 (Resolved): order of init.d script shutdown sequence
- The init.d shutdown sequence first stops the monitors, then the osds and then the mds. I think this sequence should ...
- 01:15 PM Feature #6154: ceph-deploy should be able to use an argument "fs-type" to specify the filesystem ...
- Sure, done. See https://github.com/ceph/ceph-deploy/pull/85.
- 07:08 AM Feature #6154: ceph-deploy should be able to use an argument "fs-type" to specify the filesystem ...
- Benoit, the patch looks good. Could you ammend the commit to have a `signed-by` signature? This is done with the `-s`...
- 01:05 PM Feature #6017 (Resolved): ceph-deploy mon create: create on all mons in ceph.conf + then do gathe...
- Merged into ceph-deploy master branch with hash: e66d751
\o/ - 09:54 AM Feature #6017 (Fix Under Review): ceph-deploy mon create: create on all mons in ceph.conf + then ...
- Opened pull request https://github.com/ceph/ceph-deploy/pull/82
- 09:12 AM Bug #6335 (Resolved): ceph-deploy may *still* hang with pushy
- We moved the conn.close() call as early as possible in all `mon create` calls.
Pull request: https://github.com/ce... - 08:56 AM Bug #6337 (Resolved): Closed connection causes import errors for Debian mon create commands
- 08:56 AM Bug #6337: Closed connection causes import errors for Debian mon create commands
- Merged into ceph-deploy master branch: b67281e
- 07:35 AM Bug #6337 (Fix Under Review): Closed connection causes import errors for Debian mon create commands
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/84
- 07:22 AM Bug #6337 (Resolved): Closed connection causes import errors for Debian mon create commands
- Because of a last minute fix to prevent connections hanging on `mon create` that meant closing the pushy connection
... - 08:30 AM Bug #6330 (Closed): ceph-deploy does not use /etc/hosts entry making functional DNS a dependency
09/17/2013
- 08:04 PM Bug #6330: ceph-deploy does not use /etc/hosts entry making functional DNS a dependency
- Thanks Alfredo. I tried to recreate the error I encountered as a test case but have failed to make it re-occur. I now...
- 01:24 PM Bug #6330: ceph-deploy does not use /etc/hosts entry making functional DNS a dependency
- Can you give me an example on where does ceph-deploy fails to use something that is defined in `/etc/hosts` ?
All ... - 05:26 PM Bug #6335 (Resolved): ceph-deploy may *still* hang with pushy
- We need to close the connection as early as possible in an attempt to mitigate probably hanging issues....
- 12:43 PM Feature #6017: ceph-deploy mon create: create on all mons in ceph.conf + then do gatherkeys if no...
- And for a successful run for two nodes, it looks like this:...
- 12:42 PM Feature #6017: ceph-deploy mon create: create on all mons in ceph.conf + then do gatherkeys if no...
- This is how it looks for monitors that never reach quorum, it loops for 5 times per monitor with incremental wait tim...
- 07:42 AM Bug #6300: ceph-deploy: mon create prompts for password
- This is now fixed in the library handling ceph-deploy connections: https://github.com/alfredodeza/remoto/commit/ed273...
- 07:11 AM Bug #6300: ceph-deploy: mon create prompts for password
- 06:57 AM Bug #6300: ceph-deploy: mon create prompts for password
- Actually, this is kind of valid (my initial take on it was that keys where missing).
This is caused by how ceph-de... - 02:08 AM Feature #6154: ceph-deploy should be able to use an argument "fs-type" to specify the filesystem ...
- Here's a patch to add the proposed option. Let me know if it needs adjustments.
09/16/2013
- 08:50 PM Bug #6330 (Closed): ceph-deploy does not use /etc/hosts entry making functional DNS a dependency
- This is to avoid what I consider to be a bug in Linux where some tools do not respect the /etc/nsswitch.conf settings...
- 12:36 PM Bug #6324 (Resolved): add a timeout flag for commands that may hang
- 10:33 AM Bug #6324: add a timeout flag for commands that may hang
- Fixed and merged into ceph-deploy master branch with hash: ab46733
- 09:45 AM Bug #6324 (Fix Under Review): add a timeout flag for commands that may hang
- Pull request opened: https://github.com/ceph/ceph-deploy/pull/77
- 07:18 AM Bug #6324 (Resolved): add a timeout flag for commands that may hang
- There are certain commands that can cause a remote process to hang if we are capturing both stderr and stdout and som...
- 09:55 AM Bug #6314: catch case where mon starts up but has rank -1 accordingly to mon_status.
- Greg, yes, you are correct. The idea here is that we will implement a command to deploy all monitors defined initiall...
- 09:53 AM Bug #6314 (In Progress): catch case where mon starts up but has rank -1 accordingly to mon_status.
- Created issue #6324 to prevent this command from hanging.
- 08:14 AM Feature #6067: ceph-deploy: make mon create catch common errors
- Just created issue #6325 to clearly tell when there is a connection problem, which (currently) it is impossible to te...
- 03:56 AM Bug #4924: ceph-deploy: gatherkeys fails on raring (cuttlefish)
- I have just managed to deploy 3 ceph nodes successfully in Ubuntu Raring using Dumpling 0.67.3. The above issue looks...
09/15/2013
- 09:43 PM Bug #4924: ceph-deploy: gatherkeys fails on raring (cuttlefish)
- Hi All,
I am still hitting this in RHEL 6.4 with latest dumpling release (ceph-0.67.3-0.el6.x86_64).
For my setup,...
Also available in: Atom