Project

General

Profile

Activity

From 01/03/2018 to 02/01/2018

02/01/2018

03:59 PM Bug #22879 (Resolved): (luminous) ceph-volume filestore creation stopped with 'TypeError: sequenc...
Hi,
i'm not able to create a simple filestore under ubuntu xenial......
Enrico Labedzki
03:55 PM Bug #22878 (Resolved): `lvm zap` should work with encrypted devices
Currently `lvm zap` fails when run against an encrypted device if it's still opened by cryptsetup. The device must be... Andrew Schoen
03:33 PM Bug #22836: ceph-volume doesn't add OSD's auth to Monitors when creating new BlueStore OSD
I believe this bug is because of the use of --osd-id. This PR fixes the issue where auth is not created for an OSD if... Andrew Schoen
12:32 PM Bug #22836 (Need More Info): ceph-volume doesn't add OSD's auth to Monitors when creating new Blu...
We can't replicate this issue when deploying OSDs. Do you have some configuration that requires these permissions? Wi... Alfredo Deza
03:30 PM Feature #22876 (Resolved): unmount devices with ceph-volume lvm zap
ceph-volume lvm zap will fail if the device you're zapping is mounted. We should check to see if the device is mounte... Andrew Schoen
12:28 PM Bug #22840 (Closed): (luminous) ceph-volume (lvcreate --yes), unknown parameter --yes
Trusty is not supported with ceph-volume because Trusty doesn't have systemd and ceph-volume depends on it. You might... Alfredo Deza

01/31/2018

03:18 PM Bug #22642: can't reuse OSD ID if ID doesn't exist in `ceph osd tree`
https://github.com/ceph/ceph/pull/20203 Andrew Schoen
01:39 PM Bug #22841 (Resolved): Be resilient to PATH issues
In some situations the $PATH might not be set correctly, so executables will not be found when calling them from inte... Alfredo Deza
01:37 PM Bug #22840 (Closed): (luminous) ceph-volume (lvcreate --yes), unknown parameter --yes
Hi,
currently we are gambling a little with luminous release for ubuntu trusty, we want to work out a valid migrat...
Enrico Labedzki
02:35 AM Bug #22836 (Resolved): ceph-volume doesn't add OSD's auth to Monitors when creating new BlueStore...
When add new BlueStore OSD with ceph-volume command, the new OSD daemon fails to start with log
@
_get_class not pe...
pei jia

01/24/2018

01:39 PM Bug #22785 (Resolved): ceph-volume does not activate OSD using mount options in ceph.conf
In ceph-ansible, the user can specify in group_vars/all.yml the var osd_mount_options_xfs , and this will result in s... Ben England

01/23/2018

08:17 PM Bug #22620 (In Progress): ceph-volume simple dmcrypt support
Alfredo Deza
08:17 PM Feature #22653 (Resolved): add a --destroy flag to forcefully remove the underlying vg/lv when za...
merged commit 1ed0062 into master Alfredo Deza
10:18 AM Backport #22701 (In Progress): luminous: ceph-volume fails when centos7 image doesn't have lvm2 i...
@Prashant: Please talk to the c-v developers. They have been handling the c-v backports until now. Nathan Cutler

01/22/2018

09:43 PM Bug #22663 (Resolved): man page needs updating to explain bluestore support
merged commit b020674 into ceph:master Alfredo Deza
07:19 PM Feature #22619 (Fix Under Review): ceph-volume lvm dmcrypt support
PR open at https://github.com/ceph/ceph/pull/20054 Alfredo Deza
03:57 PM Bug #22720 (Closed): Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@...
If you have installed ceph in a different dir then you must have the systemd files in places that systemd will recogn... Alfredo Deza

01/20/2018

02:15 PM Bug #22720: Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@.service
Alfredo Deza wrote:
> I haven't been able to replicate this problem with 7.1.
>
> Looking at your systemd unit fi...
xueyun lau

01/19/2018

04:06 PM Bug #22720 (Can't reproduce): Added an osd by ceph-volume,it got an error in systemctl enable cep...
Alfredo Deza

01/18/2018

03:58 PM Feature #22653 (Fix Under Review): add a --destroy flag to forcefully remove the underlying vg/lv...
https://github.com/ceph/ceph/pull/20010 Andrew Schoen
03:25 PM Bug #22720: Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@.service
I haven't been able to replicate this problem with 7.1.
Looking at your systemd unit file for ceph-volume, it look...
Alfredo Deza
01:58 PM Bug #22720: Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@.service
We don't test with CentOS 7.1, we are confident this works on 7.4 though. While we investigate this for 7.1, is it po... Alfredo Deza
12:57 AM Bug #22720: Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@.service
[root@node-186 ~]# uname -a
Linux node-186 4.12.4 #1 SMP Fri Dec 22 11:50:17 HKT 2017 x86_64 x86_64 x86_64 GNU/Linux...
xueyun lau
12:25 AM Backport #22701: luminous: ceph-volume fails when centos7 image doesn't have lvm2 installed
Nathan, I do not have access to ceph-volume project, can you assign this tracker to me and set status to In-progress Prashant D
12:25 AM Backport #22701: luminous: ceph-volume fails when centos7 image doesn't have lvm2 installed
Backport PR: -https://github.com/ceph/ceph/pull/19992- Prashant D

01/17/2018

02:29 PM Bug #22720: Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@.service
What Distro and distro version are you using? Alfredo Deza
07:39 AM Bug #22720 (Closed): Added an osd by ceph-volume,it got an error in systemctl enable ceph-volume@...
when I using ceph-volume to add an osd,prepare is ok, but, when I activate osd,I got an error" Failed to issue method... xueyun lau

01/16/2018

12:58 PM Bug #22704 (Duplicate): ceph-volume still creates osd ids and auth when creating osd fails
This was fixed with #22281 which is not yet released. 12.2.2 is affected. 12.2.3 shouldn't Alfredo Deza
11:23 AM Bug #22704 (Duplicate): ceph-volume still creates osd ids and auth when creating osd fails
I have a broken disk, resulting in an error running ceph-volume.
Each time the command runs though, it generate a ne...
Kenneth Waegeman
08:23 AM Bug #22663: man page needs updating to explain bluestore support
https://github.com/ceph/ceph/pull/19960 Jing Li
08:17 AM Backport #22701 (Resolved): luminous: ceph-volume fails when centos7 image doesn't have lvm2 inst...
https://github.com/ceph/ceph/pull/20215 Nathan Cutler

01/11/2018

12:40 PM Bug #22663 (Resolved): man page needs updating to explain bluestore support
It currently mentions filestore as the default, and that bluestore isn't supported which is not correct for 12.2.2 on... Alfredo Deza

01/10/2018

03:36 PM Bug #22443 (Pending Backport): ceph-volume fails when centos7 image doesn't have lvm2 installed
Kefu Chai
02:46 PM Bug #22642: can't reuse OSD ID if ID doesn't exist in `ceph osd tree`
Sage Weil
02:45 PM Bug #22307 (Resolved): `ceph-volume lvm --bluestore` does not indicate success in output
merged commit 25c72da into master Alfredo Deza
02:18 PM Feature #22653 (Resolved): add a --destroy flag to forcefully remove the underlying vg/lv when za...
A new flag should be added to `lvm zap` that allows destroying the vg/lv/pv when zapping, since it is possible an ope... Alfredo Deza

01/09/2018

09:20 PM Bug #22642 (Resolved): can't reuse OSD ID if ID doesn't exist in `ceph osd tree`
ceph-volume will skip adding the auth required, the monitor will not know about the OSD and it will end up with the O... Alfredo Deza
04:11 PM Bug #22307 (Fix Under Review): `ceph-volume lvm --bluestore` does not indicate success in output
https://github.com/ceph/ceph/pull/19875 Andrew Schoen

01/08/2018

08:10 PM Bug #22620 (Resolved): ceph-volume simple dmcrypt support
Implement the dmcrypt support for decrypting devices in the same way ceph-disk allowed it. This is required for the s... Alfredo Deza
08:01 PM Feature #22619 (Resolved): ceph-volume lvm dmcrypt support
* Enable the --dmcrypt flag when creating OSDs
* Detect encrypted devices and decrypt accordingly when activating
*...
Alfredo Deza
07:15 PM Bug #22554 (Rejected): bluestore osd cannot authenticate when created with --osd-id option
Alfredo Deza
07:15 PM Bug #22554: bluestore osd cannot authenticate when created with --osd-id option
The `--osd-id` option is only meant to be used for *reusing* an OSD ID, not for using one from scratch. From the help... Alfredo Deza
 

Also available in: Atom