Activity
From 08/19/2015 to 09/17/2015
09/17/2015
- 08:50 PM Revision d6996aae (ceph-deploy): Merge pull request #356 from ceph/wip-download
- install: go direct to download.ceph.com
Reviewed-by: Travis Rhoden <trhoden@redhat.com> - 06:37 PM Revision ea42124e (ceph-deploy): install: go direct to download.ceph.com
- Ceph.com does redirects, but this is faster.
Signed-off-by: Sage Weil <sage@redhat.com> - 08:27 AM Bug #13137 (Closed): Ceph-deploy had failed to create cluster in LXC container
- Ceph-deploy failed to create cluster in LXC container (on Vmware VM is ok) according ceph installation (quick) prefl...
09/14/2015
- 06:29 PM Feature #13087 (In Progress): use ceph-detect-init for init system logic
- Right now ceph-deploy carries intrinsic knowledge of which init system to use on a given host, based on a combination...
- 06:24 PM Bug #12557 (Resolved): systemd: osd create should enable ceph.target
- 06:23 PM Fix #12999 (Resolved): forgetkeys does not remove bootstrap-rgw key
09/10/2015
- 11:13 PM Revision dcf7725c (ceph-deploy): Merge pull request #353 from ceph/wip-jessie
- jessie support
Reviewed-by: Travis Rhoden <trhoden@redhat.com> - 11:10 PM Revision 2871ace6 (ceph-deploy): debian/ubuntu: add systemd support
- Prefer systemd over upstart if present (for newer ubuntu)
Signed-off-by: Sage Weil <sage@redhat.com>
09/09/2015
- 05:15 PM Revision 99d10730 (ceph-deploy): Merge pull request #352 from trhoden/RM-12999
- [RM-12999] remove bootstrap-rgw key via forgetkeys
- 04:50 PM Fix #12999 (Fix Under Review): forgetkeys does not remove bootstrap-rgw key
- https://github.com/ceph/ceph-deploy/pull/352
09/08/2015
- 11:01 PM Revision 6bdbfe74 (ceph-deploy): [RM-12999] remove bootstrap-rgw key via forgetkeys
- Fixes: #12999
Signed-off-by: Travis Rhoden <trhoden@redhat.com> - 11:01 PM Fix #12999 (Resolved): forgetkeys does not remove bootstrap-rgw key
- 08:36 PM Revision 1300cb1a (ceph-deploy): Merge pull request #351 from ceph/wip-osd-create
- osd: enable ceph on osd create
Reviewed-by: Travis Rhoden <trhoden@redhat.com> - 08:30 PM Bug #12557 (Fix Under Review): systemd: osd create should enable ceph.target
- 08:28 PM Revision 9cfe20a9 (ceph-deploy): osd: enable ceph on osd create
- Fixes: #12557
Signed-off-by: Sage Weil <sage@redhat.com> - 03:27 AM Support #12980: Question --- BLOCK DEVICE QUICK START
- it's ok,I'm sorry it was my mistake,thank you very much.
- 02:28 AM Support #12980: Question --- BLOCK DEVICE QUICK START
- tzu chi wrote:
> tzu chi wrote:
> > client connect to monitor is OK?
> >
> > otis@client:~$ ceph -s -k /etc/ceph... - 01:59 AM Support #12980: Question --- BLOCK DEVICE QUICK START
- tzu chi wrote:
> client connect to monitor is OK?
>
> otis@client:~$ ceph -s -k /etc/ceph/ceph.client.admin.keyri... - 01:58 AM Support #12980: Question --- BLOCK DEVICE QUICK START
- client connect to monitor is OK?
otis@client:~$ ceph -s -k /etc/ceph/ceph.client.admin.keyring
cluster 0f6000...
09/07/2015
- 09:48 AM Support #12980: Question --- BLOCK DEVICE QUICK START
- Before creating rbd image, can you check if monitor is alive and try "ceph -s -k /etc/ceph/ceph.client.admin.keyring"...
- 09:25 AM Support #12980 (Closed): Question --- BLOCK DEVICE QUICK START
- please help,i execute instruction but have error
rbd create foo --size 8192 -m 10.0.100.30 -k /etc/ceph/ceph.clien...
09/05/2015
- 03:42 PM Bug #12969 (Rejected): gatherkeys does not wait for ceph-create-keys to complete
- There's a race condition in mon create-initial: we wait for teh quorum to form and then immediately try to fetch the ...
09/04/2015
- 04:14 PM Bug #12557: systemd: osd create should enable ceph.target
- Travis Rhoden wrote:
> Is this still an issue? I believe that it might be. I'm looking at ceph-deploy's code for o...
09/03/2015
- 11:46 AM Bug #12929: error message says HostNotFound when SSH has other errors
- Opened a ticket for execnet that explains what is going on:
https://bitbucket.org/hpk42/execnet/issues/48/hostnot... - 11:45 AM Bug #12929 (New): error message says HostNotFound when SSH has other errors
- When I ran:...
09/02/2015
- 09:19 PM Revision d7f89bff (ceph-deploy): Merge pull request #350 from ceph/wip-test
- install: add --test install option to install ceph-test package
Reviewed-by: Alfredo Deza <adeza@redhat.com>
Reviewe... - 08:11 PM Revision 51958495 (ceph-deploy): install: add --test install option to install ceph-test package
- We need this for the teuthology tests.
Don't include it in --all, since any normal person does not want it.
Signed-...
09/01/2015
- 09:23 PM Bug #12914 (New): RGW permissions and init script disagree
- I have been following the quick start guide (http://docs.ceph.com/docs/master/start/quick-ceph-deploy/#add-an-rgw-ins...
- 08:45 PM Bug #12887 (Resolved): multipath must activate with systemd udev
- https://github.com/ceph/ceph/pull/5747
- 08:44 PM Bug #12786 (Resolved): ceph-deploy disagrees with ceph on the centos init system
08/31/2015
- 06:56 PM Bug #12887: multipath must activate with systemd udev
- <sage> i think we need to unify those rules and make a ceph-disk trigger-activate[-*] that either does it syncrhonosl...
- 06:55 PM Bug #12887 (Resolved): multipath must activate with systemd udev
- It currently only has rules for non systemd udev
08/30/2015
- 09:29 AM Bug #11538: "unable to get 'HEALTH_OK' after waiting 15 minutes" in ceph-deploy-hammer-distro-bas...
- http://pulpito.ceph.com/loic-2015-08-30_09:43:51-ceph-deploy-hammer-backports---basic-vps/1038829/...
08/29/2015
- 05:20 PM Revision 4d48b233 (ceph-deploy): Merge pull request #348 from ceph/wip-dev-commit
- install: add support for --dev-commit <sha1>
Reviewed-by: Travis Rhoden <trhoden@redhat.com> - 02:27 PM Revision 19d782e3 (ceph-deploy): install: add support for --dev-commit <sha1>
- Adjusted centos, debian, fedora.
suse and rhel don't seem to pay attention to version_kind... :/
Signed-off-by: Sag...
08/28/2015
- 07:09 PM Feature #12827 (New): provide iptable rules after ceph services are up
- Recently we had problem map rbd images from hosts out of Ceph cluster. It turns out iptables on Ceph mon blocks port ...
- 02:12 PM Bug #12225: "ceph-deploy: error: unrecognized arguments" in smoke-master-distro-basic-multi run
- Run: http://pulpito.ceph.com/teuthology-2015-08-28_05:00:06-smoke-master-distro-basic-multi/
Job: 1035606
08/27/2015
- 08:43 PM Bug #12786 (Fix Under Review): ceph-deploy disagrees with ceph on the centos init system
- https://github.com/ceph/ceph/pull/5705
- 09:03 AM Bug #12786: ceph-deploy disagrees with ceph on the centos init system
- It was decided that ceph-detect-init would be the reference implementation. It looks like the opposite is happening w...
08/26/2015
- 09:53 PM Bug #12558 (Resolved): system: rgw create doesn't work
- 09:52 PM Bug #12557: systemd: osd create should enable ceph.target
- Is this still an issue? I believe that it might be. I'm looking at ceph-deploy's code for osd prepare/activate/crea...
- 09:43 PM Bug #12786: ceph-deploy disagrees with ceph on the centos init system
- Isn't this then an issue with ceph-detect-init?
ceph-deploy will only attempt to use systemd if the ceph.target fi... - 12:05 AM Bug #12786 (Resolved): ceph-deploy disagrees with ceph on the centos init system
- As of 0fbc7bd57e3fcef2ad700fc2cdf208f6befd999c (August 11th), ceph-deploy finds that centos 7 is systemd. ceph-detect...
- 09:38 PM Bug #12756 (Duplicate): ceph-deploy install failes at running rpmkeys (Firefly, Cent6)
- ceph-deploy 1.5.28 has been released, which resolves this.
- 07:11 PM Bug #12726: ceph-deploy suite fails on CentOS 7
- These links are mainly for my own memory :)
https://github.com/ceph/ceph-deploy/commit/81266f79c21ffad272f1a1d397ad0... - 07:09 PM Bug #12726: ceph-deploy suite fails on CentOS 7
- Why is it 'ceph.target'?
I'm really hoping that we can implement a top-level systemd service that will allow users... - 04:49 PM Bug #12726: ceph-deploy suite fails on CentOS 7
- I was pointed at: http://qa-proxy.ceph.com/teuthology/loic-2015-08-20_01:57:10-ceph-deploy-master---basic-vps/1022951...
- 01:14 PM Bug #12726: ceph-deploy suite fails on CentOS 7
- Yes, this is related to http://tracker.ceph.com/issues/12786 and was introduced by https://github.com/ceph/ceph-deplo...
- 12:22 PM Bug #12726: ceph-deploy suite fails on CentOS 7
- Looks like ceph-deploy is triggering the systemd instead of sysvinit path here.
- 06:25 PM Revision 4be03191 (ceph-deploy): 1.5.28
- 05:43 PM Revision c00e9f5d (ceph-deploy): Bump version
- Signed-off-by: Travis Rhoden <trhoden@redhat.com>
- 05:42 PM Revision 8c79cea8 (ceph-deploy): Update changelog
- Signed-off-by: Travis Rhoden <trhoden@redhat.com>
- 05:25 PM Fix #12644 (Resolved): Port distro.pkg to distro.packager, then remove unused code
- 05:24 PM Feature #12576 (Resolved): centos7/rhel7: use systemd
- 05:23 PM Fix #12649 (Resolved): "mon add" hangs when going from 1->2 mons
- 05:23 PM Bug #12699 (Resolved): get_connection() does not have callbacks flag
- 04:51 PM Revision 1dfc7489 (ceph-deploy): [1.5.22-stable] make install --repo handle multiple hosts
- The for loop was always returning after the first host
Signed-off-by: Travis Rhoden <trhoden@redhat.com>
(cherry pic... - 01:46 PM Bug #12793 (Rejected): CentOS 7 is systemd for infernalis and sysvinit before
- It's already done with a test of /usr/lib/systemd/system/ceph.target which is presumably only installed by > hammer
- 01:39 PM Bug #12793 (Rejected): CentOS 7 is systemd for infernalis and sysvinit before
- At the moment it is set to be systemd always.
08/25/2015
- 03:15 AM Bug #11105: ceph.conf reported to be different although it is identical
- yeah, that above is the problem. I managed to instrument the remote function by making it write its own file in /tmp...
- 02:31 AM Bug #11105: ceph.conf reported to be different although it is identical
- FWIW I noticed the same thing when deploying the new mon on the lab cluster. I had just done 'config push' so the fi...
- 02:28 AM Bug #11105: ceph.conf reported to be different although it is identical
- running ceph-deploy 1.5.27, ceph disk prepare <host>:<blockdev> reports this. Tracing, I find myself in osd.prepare(...
08/24/2015
- 08:08 PM Bug #12756: ceph-deploy install failes at running rpmkeys (Firefly, Cent6)
- Related to #12663
- 07:46 PM Bug #12770 (New): "ceph mon create-initial" fails when public_network isnt set to eth0
- linux distro: RHEL 7.1
ceph version: redhat ceph 1.3, version: 0.94.1
I have a server with 3 nics.
Eth0 is m... - 03:54 PM Bug #11538: "unable to get 'HEALTH_OK' after waiting 15 minutes" in ceph-deploy-hammer-distro-bas...
- Run: http://pulpito.ceph.com/teuthology-2015-08-17_10:51:32-ceph-deploy-hammer-distro-basic-vps/
Jobs: 1018863, 1018...
08/23/2015
- 02:33 AM Bug #12756 (Duplicate): ceph-deploy install failes at running rpmkeys (Firefly, Cent6)
- This is occurring on a CentOS6.x x64 server for me at the moment.
Searched up and down for identical bug reports, ...
08/20/2015
- 06:37 PM Revision 315122e3 (ceph-deploy): Bump version
- Signed-off-by: Travis Rhoden <trhoden@redhat.com>
- 06:34 PM Revision 9cf73a43 (ceph-deploy): [RM-12649] No need to call "ceph mon add"
- ceph mon add is not needed - merely starting the ceph-mon
daemon will cause it to join the cluster when all the other... - 05:38 PM Bug #12663 (Resolved): rpmkeys does not exist on EL6
- Went in with https://github.com/ceph/ceph-deploy/pull/343
Need to cut 1.5.28 to get it out. - 12:31 AM Bug #12726: ceph-deploy suite fails on CentOS 7
- Similar failure using just one host http://149.202.170.149:8081/ubuntu-2015-08-19_23:29:05-ceph-disk-master---basic-o...
- 12:22 AM Bug #12726: ceph-deploy suite fails on CentOS 7
- Caught this before a VM was shutdown....
- 12:19 AM Bug #12726: ceph-deploy suite fails on CentOS 7
- Fail without dmcrypt http://pulpito.ceph.com/loic-2015-08-20_01:57:10-ceph-deploy-master---basic-vps/1022951/
<pre...
Also available in: Atom