Project

General

Profile

Activity

From 01/06/2016 to 02/04/2016

02/04/2016

10:34 PM Bug #14638: Widespread package install failures in sepia
When I created this I erroneously thought I'd seen it in a run from earlier in the day, but that turns out not to be ... Greg Farnum
09:16 PM Bug #14638: Widespread package install failures in sepia
I've been trying to reproduce this since this morning and haven't been able to. Zack Cerza
06:11 PM Bug #14638: Widespread package install failures in sepia
http://sentry.ceph.com/sepia/teuthology/issues/6/ Zack Cerza
05:46 PM Bug #14638: Widespread package install failures in sepia
Because it was left out of the report: this happened on Ubuntu 14.04 Zack Cerza
07:17 AM Bug #14638 (Closed): Widespread package install failures in sepia
http://pulpito.ceph.com/gregf-2016-02-03_09:19:17-fs-greg-fs-testing-23---basic-mira/4638/... Greg Farnum
06:56 PM Revision c63cb1b4 (ceph-cm-ansible): Merge pull request #192 from dmick/wip-vpshost
Add vmhost role, supporting tasks, to provision VPS hosts Zack Cerza
06:52 PM Revision 0881d38e (ceph-cm-ansible): Add vmhost role, supporting tasks, to provision VPS hosts
Note: this expects some setup on the host; see README.rst Dan Mick

02/02/2016

02:01 AM Bug #14601 (Rejected): Openstack packstack installation needed modifications to /etc/httpd/conf.d...
While trying to bring up Openstack using packstack, I ran into problems that were
resolved by adding the following l...
Anonymous

02/01/2016

10:59 PM Feature #14600 (Resolved): Nagios monitoring on RHEL and CentOS
nrpe is causing selinux errors, and in turn, job failures.
This is because I changed /etc/sysconfig/nrpe on centos...
David Galloway

01/22/2016

09:05 PM Bug #14477 (Duplicate): Refine post-install cobbler ansible trigger
We need a more reliable way of making sure a system's networking is up before calling the post-installation trigger.
...
David Galloway

01/21/2016

10:22 PM Bug #14459: cephlab_rc_local needs to be smarter about waiting for the network
If you look at the http error log on magna001 around the timestamp: @Thu Jan 21 18:31:14 2016@, there are lots of tim... Zack Cerza
10:15 PM Bug #14459: cephlab_rc_local needs to be smarter about waiting for the network
Just a bit of information: magna049 was reimaged a second time today, and ansible wasn't properly run after the secon... Zack Cerza
09:49 PM Bug #14459 (Resolved): cephlab_rc_local needs to be smarter about waiting for the network
From a conversation with dgalloway:
<wusui> i am having trouble ssh'ing from magna002 to magna049 magna079 and mag...
Anonymous

01/20/2016

10:32 PM Revision 9cd7718b (ceph-cm-ansible): Merge pull request #191 from ceph/wip-timezone
common: Set timezone (defaults to UTC)
Reviewed-by: Dan Mick <dmick@redhat.com>
Dan Mick
10:19 PM Revision 64f35c89 (ceph-cm-ansible): Handle timedatectl output format change
timedatectl in 7.2 helpfully changes 'Timezone' to 'Time zone'. Use a
regexp to handle both formats.
Signed-off-by: ...
Zack Cerza
08:56 PM Revision bb809c6d (ceph-cm-ansible): On CentOS 6, set the hardware clock
/etc/localtime on its own doesn't cause the hardware clock to be reset
(at least immediately). So, do that.
Signed-o...
Zack Cerza
07:35 PM Revision 5682d4cb (ceph-cm-ansible): Use separate codepaths for CentOS 6 vs. 7
Signed-off-by: Zack Cerza <zack@redhat.com> Zack Cerza
05:40 PM Revision d73e1a80 (ceph-cm-ansible): Set timezone for apt systems
Signed-off-by: Zack Cerza <zack@redhat.com> Zack Cerza
05:37 PM Revision 5b5a40ba (ceph-cm-ansible): Set timezone for yum systems
Signed-off-by: Zack Cerza <zack@redhat.com> Zack Cerza
05:28 PM Revision 7e6fc426 (ceph-cm-ansible): Add default timezone (UTC)
Signed-off-by: Zack Cerza <zack@redhat.com> Zack Cerza
05:17 PM Revision 082ccf2f (ceph-cm-ansible): common: Split out tasks into yum_systems.yml
Similar to how the testnodes role works. apt_systems.yml will be added
when it's needed.
Signed-off-by: Zack Cerza <...
Zack Cerza

01/19/2016

05:29 PM Revision b9565e6f (ceph-cm-ansible): Merge pull request #190 from ceph/wip-puddle-updates
puddle: fixes for ceph-1.3-async and distill Zack Cerza

01/15/2016

10:02 PM Revision 4ba11576 (ceph-cm-ansible): puddle: add SCL to ceph-1.3-async configuration
In RHCeph 1.3.1, we introduced Foreman, which has a dependency on the
SCL product. All async updates after this must ...
Ken Dreyer
10:00 PM Revision 61811675 (ceph-cm-ansible): puddle/ceph-distill: rm unused variable
This would cause `ceph-distill` to fail when the file did not exist for
`cat` to find.
Ken Dreyer
06:20 PM Revision 20974e9d (ceph-cm-ansible): Merge pull request #188 from ceph/wip-cobbler-centos7
cobbler_profile: Add CentOS 7.1 and 7.2 Andrew Schoen
03:41 PM Revision fdf8f151 (ceph-cm-ansible): Merge pull request #189 from dmick/master
Add 'nokeymap' to inktank-rescue cobbler profile's kernel options Zack Cerza
03:09 AM Revision 4749ec88 (ceph-cm-ansible): Add 'nokeymap' to inktank-rescue cobbler profile's kernel op...
This stops it prompting for a keymap on boot.
Signed-off-by: Dan Mick <dan.mick@redhat.com>
Dan Mick

01/14/2016

08:48 PM Revision 38fb9304 (ceph-cm-ansible): cobbler_profile: Add CentOS 7.1 and 7.2
Also rename the old CentOS 7 profile to reflect that it is for 7.0
Signed-off-by: Zack Cerza <zack@redhat.com>
Zack Cerza

01/13/2016

09:32 PM Revision bc866d07 (ceph-cm-ansible): Merge pull request #186 from ceph/revert-166-wip-rm-fastcgi-...
Revert "testnode: do not install fastcgi on RHEL" Andrew Schoen
06:35 PM Revision 94848900 (ceph-cm-ansible): use gitbuilder_host variable instead of hardcoded url name
Signed-off-by: Vasu Kulkarni <vasu@redhat.com> Vasu Kulkarni
05:57 PM Revision c52db838 (ceph-cm-ansible): Merge pull request #167 from ceph/wip-rhel-pkg
rhel package changes required for ceph Andrew Schoen
03:39 PM Revision 5216047c (ceph-cm-ansible): Merge pull request #187 from dmick/master
users: filter userlists against 'users' later Zack Cerza
05:17 AM Revision 5d786ef0 (ceph-cm-ansible): users: filter userlists against 'users' later
Filter the user lists after the other list-modifying
operations. This way, the user-requested 'users' variable
filte...
Dan Mick

01/12/2016

11:28 PM Revision 2921876e (ceph-cm-ansible): Revert "testnode: do not install fastcgi on RHEL"
vasukulkarni

01/08/2016

12:49 AM Feature #14297 (Resolved): Output useful message indicating ansible is running after kickstart
Freshly-provisioned machines appear to hang after install and first reboot. Ansible's getting run at this time as pa... David Galloway
 

Also available in: Atom