Project

General

Profile

Actions
Copy link

Support #14704

closed

Rack tala or saya

Added by David Galloway about 8 years ago. Updated about 8 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
David Galloway
Category:
Infrastructure Hardware
Target version:
-
% Done:

0%

Tags:
Reviewed:
Affected Versions:

Description

For 32-bit ARM testing

Actions
Copy link
 #1

Updated by David Galloway about 8 years ago

  • Status changed from New to 4

tala{001..016} have been re-racked and their IPMI interfaces are accessible. I think some magic will be needed in Cobbler but the physical hosts are all yours, Dan.

Actions
Copy link
 #2

Updated by David Galloway about 8 years ago

I think this box had 2x 1Gb uplinks and a 10Gb uplink and that's why we can't reach the actual OSes.

I put in a ticket with IT to get the uplink module on the switch configured so I can use a 10Gb port. I'll cable this next time I'm at RDU2.

Actions
Copy link
 #3

Updated by David Galloway about 8 years ago

  • Priority changed from High to Normal

These are accessible on their front ifaces now. I'd still like to replace the connection with a 10Gb cable once IT configures the switch so I'm leaving this ticket open but lowering priority.

Actions
Copy link
 #4

Updated by David Galloway about 8 years ago

  • Status changed from 4 to Resolved

Finally got around to replacing the uplink with a 10Gb cable. Resolving.

Actions
Copy link

Also available in: Atom PDF