;
; Sample ceph_bup ceph_bup.conf file.
;
; This file defines cluster membership, the various locations
; that Ceph stores data, and any other runtime options.
 
; If a 'host' is defined for a daemon, the start/stop script will
; verify that it matches the hostname (or else ignore it).  If it is
; not defined, it is assumed that the daemon is intended to start on
; the current host (e.g., in a setup with a startup.conf on each
; node).
 
; global
[global]
        ; enable secure authentication
 
	;auth supported = cephx 
	max open files = 131072
        log file = /scratch/ceph_bup/ceph.log

; monitors
;  You need at least one.  You need at least three if you want to
;  tolerate any node failures.  Always create an odd number.
[mon]
        mon data = /scratch/ceph_bup/mon$id
 
        ; some minimal logging (just message traffic) to aid debugging
        debug ms = 1
        debug mon = 20
 
[mon.0]
        host = bzt1
        mon addr = 192.168.2.101:6789
; mds
;  You need at least one.  Define two to get a standby.
[mds]
        ; where the mds keeps it's secret encryption keys
        debug ms = 1
        debug mds = 20
 
[mds.0]
        host = bzt1
 
 
; osd
;  You need at least one.  Two if you want data to be replicated.
;  Define as many as you like.
[osd]
        debug ms = 1
        debug osd = 10
        debug journal = 20
        debug filestore = 20
	osd journal = /data/osd$id/journal
        osd journal size = 1000 ; journal size, in megabytes

 
        ; This is where the btrfs volume will be mounted.
        osd data = /data/osd$id

; Ideally, make this a separate disk or partition.  A few GB
        ; is usually enough; more if you have fast disks.  You can use
        ; a file under the osd data dir if need be
        ; (e.g. /data/osd$id/journal), but it will be slower than a
        ; separate disk or partition.
 
        ; if 'btrfs devs' is not specified, you're responsible for
        ; setting up the 'osd data' dir.  if it is not btrfs, things
        ; will behave up until you try to recover from a crash (which
        ; usually fine for basic testing).
; Every bz data nodes have 3 disks partitioned into 3. sda1 - scratch,  sda2  - lustre, sda3 - ceph_bup
; So every node with provide 3 OSD/OST one from each disk 3rd partition
; bz1 is designated MDS for ceph_bup now

[osd.0]
        host = bzt2
        btrfs devs = /dev/sda3
[osd.1]
        host = bzt2
        btrfs devs = /dev/sdb3
[osd.2]
        host = bzt2
        btrfs devs = /dev/sdc3

[osd.3]
        host = bzt2
        btrfs devs = /dev/sdd3
[osd.4]
        host = bzt2
        btrfs devs = /dev/sde3
[osd.5]
        host = bzt2
        btrfs devs = /dev/sdf3

; next host bz3

[osd.6]
        host = bzt3
        btrfs devs = /dev/sda3
[osd.7]
        host = bzt3
        btrfs devs = /dev/sdb3
[osd.8]
        host = bzt3
        btrfs devs = /dev/sdc3

[osd.9]
        host = bzt3
        btrfs devs = /dev/sdd3
[osd.10]
        host = bzt3
        btrfs devs = /dev/sde3
[osd.11]
        host = bzt3
        btrfs devs = /dev/sdf3
; Next host  bz4

[osd.12]
        host = bzt4
        btrfs devs = /dev/sda3
[osd.13]
        host = bzt4
        btrfs devs = /dev/sdb3
[osd.14]
        host = bzt4
        btrfs devs = /dev/sdc3

[osd.15]
        host = bzt4
        btrfs devs = /dev/sdd3
[osd.16]
        host = bzt4
        btrfs devs = /dev/sde3
[osd.17]
        host = bzt4
        btrfs devs = /dev/sdf3

; bz5 3 disks 3 partition
;
[osd.18]
        host = bzt5
        btrfs devs = /dev/sda3

[osd.19]
        host = bzt5
        btrfs devs = /dev/sdb3
[osd.20]
        host = bzt5
        btrfs devs = /dev/sdc3
[osd.21]
        host = bzt5
        btrfs devs = /dev/sdd3

[osd.22]
        host = bzt5
        btrfs devs = /dev/sde3
[osd.23]
        host = bzt5
        btrfs devs = /dev/sdf3
; bz6 3 disks 3 partition

[osd.24]
        host = bzt6
        btrfs devs = /dev/sda3
[osd.25]
        host = bzt6
        btrfs devs = /dev/sdb3
[osd.26]
        host = bzt6
        btrfs devs = /dev/sdc3

[osd.27]
        host = bzt6
        btrfs devs = /dev/sdd3
[osd.28]
        host = bzt6
        btrfs devs = /dev/sde3
[osd.29]
        host = bzt6
        btrfs devs = /dev/sdf3
; bz7 3 disks 3 partition
;

[osd.30]
        host = bzt7
        btrfs devs = /dev/sda3
[osd.31]
        host = bzt7
        btrfs devs = /dev/sdb3
[osd.32]
        host = bzt7
        btrfs devs = /dev/sdc3

[osd.33]
        host = bzt7
        btrfs devs = /dev/sdd3
[osd.34]
        host = bzt7
        btrfs devs = /dev/sde3
[osd.35]
        host = bzt7
        btrfs devs = /dev/sdf3
; bz8 3 disks 3rd partition from each drive.

[osd.36]
        host = bzt8
        btrfs devs = /dev/sda3
[osd.37]
        host = bzt8
        btrfs devs = /dev/sdb3
[osd.38]
        host = bzt8
        btrfs devs = /dev/sdc3

[osd.39]
        host = bzt8
        btrfs devs = /dev/sdd3
[osd.40]
        host = bzt8
        btrfs devs = /dev/sde3
[osd.41]
        host = bzt8
        btrfs devs = /dev/sdf3
; bz9  host 6 osds
[osd.42]
        host = bzt9
        btrfs devs = /dev/sda3
[osd.43]
        host = bzt9
        btrfs devs = /dev/sdb3
[osd.44]
        host = bzt9
        btrfs devs = /dev/sdc3

[osd.45]
        host = bzt9
        btrfs devs = /dev/sdd3
[osd.46]
        host = bzt9
        btrfs devs = /dev/sde3
[osd.47]
        host = bzt9
        btrfs devs = /dev/sdf3
; last host bz10

[osd.48]
        host = bzt10
        btrfs devs = /dev/sda3
[osd.49]
        host = bzt10
        btrfs devs = /dev/sdb3
[osd.50]
        host = bzt10
        btrfs devs = /dev/sdc3

[osd.51]
        host = bzt10
        btrfs devs = /dev/sdd3
[osd.52]
        host = bzt10
        btrfs devs = /dev/sde3
[osd.53]
        host = bzt10
        btrfs devs = /dev/sdf3

[osd.54]
       host = bzt1
       btrfs devs = /dev/sda3
[osd.55]
        host = bzt1
        btrfs devs = /dev/sdb3
[osd.56]
        host = bzt1
        btrfs devs = /dev/sdc3

[osd.57]
        host = bzt1
        btrfs devs = /dev/sdd3
[osd.58]
        host = bzt1
        btrfs devs = /dev/sde3
[osd.59]
        host = bzt1
        btrfs devs = /dev/sdf3