Activity
From 01/20/2018 to 02/18/2018
02/18/2018
- 11:33 AM Bug #22908: [Multisite] Synchronization works only one way (zone2->zone1)
- one mistake - this is a result of : radosgw-admin data sync status --source-zone=zone1 instead of metadata.
- 11:29 AM Bug #22908: [Multisite] Synchronization works only one way (zone2->zone1)
- Orit Wasserman wrote:
> can you provide the out put of sync error list commands?
> EBUSY errors are expected to hap... - 06:16 AM Bug #22897: rgw: (jewel) can't delete swift acls with swift command.
- I've made a PR for master with this change,
https://github.com/ceph/ceph/pull/20471
I believe this should apply tri...
02/17/2018
- 05:28 AM Bug #22963: radosgw-admin usage show loops indefinitly - again
- The comment by Marcin Gibula in issue 21196 is actually spot on.
This DOES actually complete, eventually, if nothin...
02/16/2018
- 10:24 PM Bug #22963: radosgw-admin usage show loops indefinitly - again
- Debugging so far:
1. The bug only occurs on the Congress cluster, not the Benjamin cluster (was rebuilt from scratch... - 07:53 PM Feature #22832 (Fix Under Review): SSL support for beast frontend
- https://github.com/ceph/ceph/pull/20464
- 02:24 PM Documentation #23027 (Resolved): document rgw_multipart_min_part_size
- Documentation for rgw_multipart_min_part_size is missing form doc/radosgw/config-ref.rst
- 11:04 AM Backport #23026 (Resolved): jewel: rgw: data sync of versioned objects, note updating bi marker
- https://github.com/ceph/ceph/pull/21213
- 11:04 AM Backport #23025 (Resolved): luminous: rgw: data sync of versioned objects, note updating bi marker
- https://github.com/ceph/ceph/pull/21214
- 11:02 AM Backport #23023 (Resolved): jewel: can not set user quota with specific value
- https://github.com/ceph/ceph/pull/20496
- 11:02 AM Backport #23022 (Resolved): luminous: can not set user quota with specific value
- https://github.com/ceph/ceph/pull/20477
- 11:02 AM Backport #23021 (Resolved): jewel: The parameter of max-uploads doesn't work when List Multipart ...
- https://github.com/ceph/ceph/pull/20479
- 11:02 AM Backport #23020 (Resolved): luminous: The parameter of max-uploads doesn't work when List Multipa...
- https://github.com/ceph/ceph/pull/20476
02/15/2018
- 09:50 PM Bug #22833: rgw: crash in RGWSyncTraceManager::finish_node()
- Luminous backport to be done in #23018
- 06:35 PM Bug #22833 (Resolved): rgw: crash in RGWSyncTraceManager::finish_node()
- 07:28 PM Bug #22825 (Pending Backport): The parameter of max-uploads doesn't work when List Multipart Uploads
- 07:26 PM Bug #22745 (Pending Backport): can not set user quota with specific value
- 04:59 PM Bug #22745: can not set user quota with specific value
- Casey Bodley wrote:
> https://github.com/ceph/ceph/pull/20063
merged - 07:24 PM Bug #22352 (Duplicate): rados gateway computes wrong AWS4 signature if canonical request contains...
- 07:22 PM Bug #22218 (Duplicate): multisite: rgw crashed during meta sync
- fixed in http://tracker.ceph.com/issues/21097
- 07:14 PM Bug #22963: radosgw-admin usage show loops indefinitly - again
- This bug definitely still exists, is affecting billing.
Here's the interesting part from --debug-rgw=20 --debug-ms=1... - 07:12 PM Bug #22908: [Multisite] Synchronization works only one way (zone2->zone1)
- can you provide the out put of sync error list commands?
EBUSY errors are expected to happen, look for other errors. - 07:02 PM Bug #22895: radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
- the hangs in RGWAsyncRadosProcessor could be due to requests sent to another gateway that's also paused for realm rec...
- 06:58 PM Bug #22804: multisite Synchronization failed when read and write delete at the same time
- a couple of prs that are potentially related? https://github.com/ceph/ceph/pull/20396 https://github.com/ceph/ceph/pu...
- 06:54 PM Bug #22827 (Resolved): rgw_file: FLAG_EXACT_MATCH actually should be enforced
- 06:52 PM Bug #18885 (Pending Backport): rgw: data sync of versioned objects, note updating bi marker
- 06:50 PM Bug #22721: Resharding hangs with versioning-enabled buckets
- 06:44 PM Bug #22928: RGW will not list contents of Jewel-era buckets: reshard does NOT fix
- 06:43 PM Bug #22756: RGW will not list contents of older buckets at all: reshard makes it show up again
- 06:43 PM Bug #22982: Objects only serving first 512K
- 06:37 PM Backport #23018 (Rejected): rgw multisite sync tracing feature
- https://github.com/ceph/ceph/pull/16492
and fixes in https://github.com/ceph/ceph/pull/20191 - 12:08 PM Bug #20166: RGW: Bad error handling when tail object is missing
- Seems that this is not resolved yet indeed. I'm also failing to see a good way how to handle this error situation. Wo...
02/14/2018
- 07:17 PM Bug #20166: RGW: Bad error handling when tail object is missing
- #20107 is marked as resolved.
Is this issue #20166 also resolved?
I think I am seeing this behavior in Luminous... - 05:23 PM Bug #23002 (Fix Under Review): some rgw suites override frontend setting in frontend/beast.yaml
- 05:23 PM Bug #23002: some rgw suites override frontend setting in frontend/beast.yaml
- https://github.com/ceph/ceph/pull/20440
- 05:21 PM Bug #23002 (Resolved): some rgw suites override frontend setting in frontend/beast.yaml
- for example, a job in the verify suite that includes frontend/beast.yaml:
description: rgw/verify/{clusters/fixe... - 06:44 AM Bug #22982: Objects only serving first 512K
- This change has been deployed at Dreamhost, seems to work so far, watching for other breakage
02/13/2018
- 06:22 PM Bug #22982: Objects only serving first 512K
- a possible fix:
https://github.com/ceph/ceph/pull/20425 - 04:55 PM Bug #22982: Objects only serving first 512K
- Manifest has appropriate raw rados objects there, so we do an unneeded conversion when reading it.
- 04:25 AM Bug #22982: Objects only serving first 512K
- Private attachment made w/ manifest & hexdump of manifest.
- 04:57 PM Bug #22833: rgw: crash in RGWSyncTraceManager::finish_node()
- 03:35 PM Backport #22987 (In Progress): jewel: rgw: user stats increased after bucket reshard
- 10:21 AM Backport #22987 (Resolved): jewel: rgw: user stats increased after bucket reshard
- https://github.com/ceph/ceph/pull/20421
- 10:20 AM Bug #22124 (Pending Backport): rgw: user stats increased after bucket reshard
- Adding jewel backport
02/12/2018
- 09:52 PM Bug #22982: Objects only serving first 512K
- Can you provide the raw manifest somehow? I want to know if the issue is the way we stored the original objects (that...
- 09:08 PM Bug #22982: Objects only serving first 512K
- Ok, Yehuda's underscore could still be correct. This is what the RGW is looking for:
* @default.51695731.142363__sha... - 09:01 PM Bug #22982: Objects only serving first 512K
- It doesn't start with an underscore in this case, but the data is from at least Dumpling, maybe older (Dumpling->Fire...
- 05:06 PM Bug #22982: Objects only serving first 512K
- it's an old object with explicit placement, so maybe pre-firefly (?). The tail objects are starting with underscore, ...
- 04:20 PM Bug #22982: Objects only serving first 512K
- @robin, can you point out the distinguishing characteristics of this? how is our CI testing missing this?
Matt - 07:48 AM Bug #22982 (Resolved): Objects only serving first 512K
- This has be seen in previous releases, but it's back again in Luminous! Too late for 12.2.3 tag, but I'll apply the f...
- 08:49 PM Bug #22986 (Resolved): hadoop-s3a jobs failing with EPERM
- the task modifies /etc/resolv.conf to set up dnsmasq, but something changed and the write to /etc/resolv.conf is now ...
- 07:16 PM Bug #22927 (Fix Under Review): rgw: Location element not returned correctly from Post Upload Object
- 04:28 PM Bug #22985: Buckets missing from rgw_read_user_buckets output
- This output contains the buckets that are fine, but not the missing ones.
The omap header is non-empty.... - 04:25 PM Bug #22985: Buckets missing from rgw_read_user_buckets output
- In the case of account @jerhec@, at least two buckets are known to be missing; let me know what other debug/data expo...
- 04:20 PM Bug #22985 (Can't reproduce): Buckets missing from rgw_read_user_buckets output
- Some buckets that are known to exist have vanished from the listing of buckets.
Dreamhost tracking DHO-1722.
He... - 02:32 PM Bug #22951 (In Progress): possible issue with ssl + libcurl
- 02:32 PM Bug #22951: possible issue with ssl + libcurl
- wip master pr: https://github.com/ceph/ceph/pull/20390
- 07:41 AM Bug #22756: RGW will not list contents of older buckets at all: reshard makes it show up again
- Workaround fix for this:...
02/09/2018
- 06:52 AM Bug #22963 (Resolved): radosgw-admin usage show loops indefinitly - again
- After updating our cluster from jewel to luminous, @radosgw-admin usage show@ loops. I thought #21196 should have clo...
- 12:57 AM Bug #22951: possible issue with ssl + libcurl
- I was able to reproduce this with libopenssl 1.0.2j-16.1 & curl 7.37 which are shipped with opensuse 42.3. There were...
02/08/2018
- 09:44 AM Bug #22804: multisite Synchronization failed when read and write delete at the same time
Another test. dump of bilog:
master merge op(write,delete),but slave miss some op.- 08:24 AM Bug #22804: multisite Synchronization failed when read and write delete at the same time
- [root@sx-3f3r-ceph-s3-c1-03 my-cluster]# radosgw-admin bucket check --fix --check-objects --bucket=testmix
[]
{
... - 08:23 AM Bug #22804: multisite Synchronization failed when read and write delete at the same time
- [root@sx-3f3r-ceph-s3-c1-03 my-cluster]# radosgw-admin bucket stats --bucket=testmix
{
... - 08:10 AM Bug #22804: multisite Synchronization failed when read and write delete at the same time
#!/bin/sh
usercfg="Ymliu.cfg"
bucket="s3://testmix"
file="s-mix011.txt"
for i in {1..100};
do
{
s3cm...- 03:09 AM Bug #22556: failed to take a lock on datalog.sync-status.f608ce2b-5584-45af-b0c5-f4896995bd22
- It has been confirmed that causes by handles
rgw_num_rados_handles = 100 - 02:31 AM Backport #22938 (In Progress): luminous: system user can't delete bucket completely
- https://github.com/ceph/ceph/pull/20357
- 01:38 AM Bug #22895: radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
- The timeout may be due to inconsistencies between the two zones, Because that did not reappear again after I deleted ...
02/07/2018
- 09:29 PM Backport #22955 (In Progress): luminous: rgw: Command to inspect the RGW cache
- 09:29 PM Backport #22955 (Resolved): luminous: rgw: Command to inspect the RGW cache
- Easiest to do first, I'll just walk the cache, print the name of each object and what hangs off it. Maybe dump the co...
- 09:27 PM Backport #22954 (In Progress): luminous: rgw: Command to invalidate cache
- 09:27 PM Backport #22954 (Resolved): luminous: rgw: Command to invalidate cache
- The original request was to use the radosgw-admin tool to invalidate cache, but this doesn't fit the RGW architecture...
- 09:21 PM Bug #22928: RGW will not list contents of Jewel-era buckets: reshard does NOT fix
- https://github.com/ceph/ceph/pull/20352
- 06:41 PM Bug #22928: RGW will not list contents of Jewel-era buckets: reshard does NOT fix
- The problem is that we fail to go to the explicit placement pool for index operations even if one is set. One workaro...
- 09:07 PM Feature #22953 (Rejected): [RFE] Better time slew handling in rgw/keystone integration
- [RFE] Better time slew handling in rgw/keystone integration
RHBZ - https://bugzilla.redhat.com/show_bug.cgi?id=15410... - 07:12 PM Feature #22603 (Pending Backport): Command to invalidate cache
- 07:11 PM Feature #22604 (Pending Backport): Command to inspect the RGW cache
- 05:51 PM Bug #22951 (Resolved): possible issue with ssl + libcurl
- Getting random segmentation faults when radosgw is trying to authenticate with keystone over ssl, while this issue is...
- 02:54 PM Bug #22852: rgw: can't download object with range when compression enabled
- 02:54 PM Bug #22852: rgw: can't download object with range when compression enabled
- s3test case https://github.com/ceph/s3-tests/pull/209
- 01:21 PM Bug #22946: rgw: s3 copy object return 'x-amz-copy-source-version-id' and 'x-amz-version-id
- https://github.com/ceph/ceph/pull/20348
- 01:21 PM Bug #22946 (New): rgw: s3 copy object return 'x-amz-copy-source-version-id' and 'x-amz-version-id
- s3 copy object should return 'x-amz-copy-source-version-id' and 'x-amz-version-id' as AWS S3
- 07:34 AM Bug #22742 (Resolved): rgw: resharding doesn't seem to preserve bucket acls
- 07:34 AM Backport #22922 (Resolved): luminous: rgw: resharding doesn't seem to preserve bucket acls
- 07:32 AM Bug #22124 (Resolved): rgw: user stats increased after bucket reshard
- 07:30 AM Bug #22124 (Pending Backport): rgw: user stats increased after bucket reshard
- 07:31 AM Backport #22434 (Resolved): luminous: rgw: user stats increased after bucket reshard
- Wow, that was fast!
- 05:02 AM Backport #22939 (Resolved): jewel: system user can't delete bucket completely
- https://github.com/ceph/ceph/pull/21212
- 05:02 AM Backport #22938 (Resolved): luminous: system user can't delete bucket completely
- https://github.com/ceph/ceph/pull/20357
- 05:01 AM Backport #22937 (Resolved): luminous: beast: listen on multiple endpoints
- https://github.com/ceph/ceph/pull/21568
- 04:41 AM Backport #22889 (In Progress): luminous: rgw_file: avoid fragging thread_local log buffer
- https://github.com/ceph/ceph/pull/20345
02/06/2018
- 05:39 PM Bug #22742: rgw: resharding doesn't seem to preserve bucket acls
- Orit Wasserman wrote:
> https://github.com/ceph/ceph/pull/20038
merged - 05:38 PM Bug #22124: rgw: user stats increased after bucket reshard
- merged luminous backport: https://github.com/ceph/ceph/pull/20327
- 05:07 PM Backport #22930 (In Progress): luminous: beast gets SignatureDoesNotMatch in v4 auth
- 05:01 PM Backport #22930 (Resolved): luminous: beast gets SignatureDoesNotMatch in v4 auth
- https://github.com/ceph/ceph/pull/20338
- 02:37 PM Bug #21685 (Resolved): user creation can overwrite existing user even if different uid is given
- 02:36 PM Backport #21789 (Resolved): luminous: user creation can overwrite existing user even if different...
- 02:35 PM Backport #22772 (Resolved): jewel: user creation can overwrite existing user even if different ui...
- 02:33 PM Backport #22703 (Resolved): jewel: rgw: offline resharding doesn't seem to preserve bucket acls
- 02:32 PM Backport #22582 (Resolved): jewel: multisite: 'radosgw-admin sync error list' contains temporary ...
- 02:31 PM Bug #22083 (Resolved): rgw segfaults after running radosgw-admin data sync init
- 02:30 PM Backport #22182 (Resolved): jewel: rgw segfaults after running radosgw-admin data sync init
- 02:27 PM Bug #21125 (Resolved): rgw:multisite: Get bucket location which is located in another zonegroup, ...
- 02:27 PM Backport #21447 (Resolved): jewel: rgw:multisite: Get bucket location which is located in another...
- 02:26 PM Backport #21791 (Resolved): jewel: RGW: Multipart upload may double the quota
- 02:16 PM Bug #21596 (Resolved): failed CompleteMultipartUpload request does not release lock
- 02:16 PM Backport #21873 (Resolved): jewel: failed CompleteMultipartUpload request does not release lock
- 02:15 PM Bug #20463 (Resolved): rgw: AWSv4 encoding/signature problem, can happen with listobjects marker.
- 02:14 PM Backport #20824 (Resolved): jewel: rgw: AWSv4 encoding/signature problem, can happen with listobj...
- 02:13 PM Bug #20037 (Resolved): rgw log includes zero byte sometimes
- 02:13 PM Backport #20480 (Resolved): jewel: rgw log includes zero byte sometimes
- 02:11 PM Bug #20374 (Resolved): rgw_file: recursive lane lock can occur in LRU drain
- 02:10 PM Backport #20399 (Resolved): jewel: rgw_file: recursive lane lock can occur in LRU drain
- 01:54 PM Bug #19604 (Resolved): rgw: Part's index is not removed when versioning enabled
- 01:54 PM Backport #20410 (Resolved): jewel: rgw: Part's index is not removed when versioning enabled
- 01:53 PM Bug #20107 (Resolved): rgw: Truncated objects
- 01:52 PM Backport #20719: jewel: rgw: Truncated objects
- This bug required two backports to get fixed.
- 01:52 PM Backport #20719 (Resolved): jewel: rgw: Truncated objects
- 12:47 PM Backport #22259 (Resolved): jewel: rgw: swift anonymous access doesn't work in jewel
- 12:25 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- Reproduces on current master branch
Listed below is sync information from both zones, if there is additional info ... - 06:21 AM Bug #22928 (Resolved): RGW will not list contents of Jewel-era buckets: reshard does NOT fix
- This is similar to issue #22756 at the outset, however it was reported on the mailing lists by Ingo Reimann <ireimann...
- 06:08 AM Bug #22714: Existing AccessKeys with leading underscore broke in upgrade
- Yehuda: I do confirm that your @rados cp@ command causes the key to work again, but it does not explain why it broke ...
- 05:55 AM Bug #22927: rgw: Location element not returned correctly from Post Upload Object
- https://github.com/ceph/ceph/pull/20330 fix this
- 05:42 AM Bug #22927 (Fix Under Review): rgw: Location element not returned correctly from Post Upload Object
- according to https://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectPOST.html
response should contain ETag and... - 03:22 AM Bug #22895: radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
I removed the logroute shell, and the next day I found that there were still timeout on slave nodes, but no hung.
...- 02:22 AM Bug #22895: radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
- Is this the dead lock problem?
- 02:19 AM Bug #22895: radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
- 2018-02-06 10:11:04.024052 7f77ce713700 20 cr:s=0x7f79753e3d40:op=0x7f7913bc1800:20RGWContinuousLeaseCR: operate()
2... - 03:06 AM Bug #22826: "x-amz-content-sha256: STREAMING-AWS4-HMAC-SHA256-PAYLOAD" is not support by V4 auth ...
- Can anyone help me?
02/05/2018
- 09:28 PM Bug #21896 (Resolved): Bucket policy evaluation is not carried out for DeleteBucketWebsite
- 09:27 PM Backport #22214 (Resolved): luminous: Bucket policy evaluation is not carried out for DeleteBucke...
- 08:33 PM Backport #22434 (New): luminous: rgw: user stats increased after bucket reshard
- https://github.com/ceph/ceph/pull/19538 was reverted by https://github.com/ceph/ceph/pull/20051 due to a problem with...
- 07:25 PM Feature #20179 (Fix Under Review): rgw: subuser usage log statistics
- https://github.com/ceph/ceph/pull/16040
- 06:58 PM Feature #22779 (Pending Backport): beast: listen on multiple endpoints
- backport depends on frontend docs from http://tracker.ceph.com/issues/22884
- 06:51 PM Bug #22248 (Pending Backport): system user can't delete bucket completely
- 06:49 PM Bug #22797 (Pending Backport): beast gets SignatureDoesNotMatch in v4 auth
- 06:30 PM Backport #22922 (In Progress): luminous: rgw: resharding doesn't seem to preserve bucket acls
- 06:09 PM Backport #22922 (Resolved): luminous: rgw: resharding doesn't seem to preserve bucket acls
- https://github.com/ceph/ceph/pull/20327
- 06:09 PM Bug #22742 (Pending Backport): rgw: resharding doesn't seem to preserve bucket acls
- 03:23 PM Bug #22852: rgw: can't download object with range when compression enabled
- 03:09 PM Bug #22124 (Fix Under Review): rgw: user stats increased after bucket reshard
- 03:09 PM Bug #22124: rgw: user stats increased after bucket reshard
- new fix:
https://github.com/ceph/ceph/pull/20038 - 02:28 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- This is interesting and helpful.
Getting to Yehuda's point -- are the object there but not in the bucket index or ... - 01:56 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- Reproduces on the current git checkout jewel branch
by sending abort signal to the synchronizing zone c2 during the... - 08:53 AM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- I am able to reproduce this, on git checkout tag/v10.2.7
the second zone c2 which is syncing has sporadic coredump... - 03:41 AM Backport #22905 (In Progress): luminous: rgw: Location element not returned correctly from Comple...
- -https://github.com/ceph/ceph/pull/20303-
- 03:00 AM Feature #22915 (New): admin api -- add ability to sync(fix) manual some objects which synced f...
- 02:58 AM Feature #22914 (New): admin api --add ability to list objects which is not sync and why on multip...
- 02:41 AM Bug #20866: rgw: crash in system_obj_set_attrs when got SIGHUP
- Martin Emrich wrote:
> Just tried it with Ceph 12.2.2, the issue is still present. Workaround is to not SIGHUP the r...
02/04/2018
- 04:11 AM Backport #22572 (In Progress): jewel: Stale bucket index entry remains after object deletion
- 03:51 AM Backport #22188 (In Progress): jewel: rgw: add cors header rule check in cors option request
- 03:49 AM Bug #21983 (Resolved): rgw: modify s3 type subuser access permission fail
- Jewel backport was rejected because the regression this is fixing was introduced post-jewel.
- 03:47 AM Backport #22022 (Rejected): jewel: rgw: modify s3 type subuser access permission fail
- Rejecting backport of fix for regression introduced post-jewel.
- 03:35 AM Backport #22018 (In Progress): jewel: Segmentation fault when starting radosgw after reverting .r...
- 03:26 AM Backport #21954 (In Progress): jewel: list bucket which enable versioning get wrong result when u...
02/03/2018
- 06:09 PM Bug #21859 (Resolved): rgw_file: full enumeration needs new readdir whence strategy, plus recurs...
- 06:08 PM Backport #21919 (Resolved): luminous: rgw_file: full enumeration needs new readdir whence strate...
- 05:41 PM Backport #22903 (In Progress): luminous: rgw: copying part without http header "x-amz-copy-source...
- 07:17 AM Backport #22903 (Resolved): luminous: rgw: copying part without http header "x-amz-copy-source-ra...
- -https://github.com/ceph/ceph/pull/20268-
https://github.com/ceph/ceph/pull/20236 - 09:06 AM Bug #22908: [Multisite] Synchronization works only one way (zone2->zone1)
- I made one mistake in the zone cfg (I have tried to "mask" a few fields). This is the proper config:...
- 09:01 AM Bug #22908: [Multisite] Synchronization works only one way (zone2->zone1)
- That information about 1 shard behind - it is ok. My ingestion to s3 is quite big and this info appears sometimes and...
- 08:53 AM Bug #22908 (Need More Info): [Multisite] Synchronization works only one way (zone2->zone1)
- I have noticed that synchronization stopped working for some reason (but not fully - let me explain):
Everything w... - 07:35 AM Bug #19289: radosgw/swift emulate split read/write acls?
- Re-adding rejected kraken backport to appease backport tooling.
- 07:18 AM Backport #22905 (Resolved): luminous: rgw: Location element not returned correctly from CompleteM...
- https://github.com/ceph/ceph/pull/20266
- 07:17 AM Backport #22904 (Resolved): jewel: rgw: copying part without http header "x-amz-copy-source-range...
- https://github.com/ceph/ceph/pull/21294
02/02/2018
- 10:14 PM Backport #21951 (In Progress): jewel: multisite: data sync status advances despite failure in RGW...
- 10:04 PM Backport #20029 (Need More Info): jewel: multisite: radosgw-admin period commands cant use --remo...
- Casey was trying to figure out how to adapt the backport to work with an older Boost
- 10:01 PM Backport #22894 (In Progress): jewel: rgw: ECANCELED in rgw_get_system_obj() leads to infinite loop
- 09:20 PM Bug #22410 (Resolved): rgw: chained cache size is growing above rgw_cache_lru_size limit
- 09:20 PM Backport #22584 (Resolved): jewel: rgw: chained cache size is growing above rgw_cache_lru_size limit
- 09:18 PM Bug #22529 (Resolved): rgw: copy_object doubles leading underscore on object names.
- 09:18 PM Backport #22709 (Resolved): jewel: rgw: copy_object doubles leading underscore on object names.
- 09:16 PM Bug #21560 (Resolved): rgw: put cors operation returns 500 unknown error (ops are ECANCELED)
- 09:16 PM Backport #22589 (Resolved): jewel: rgw: put cors operation returns 500 unknown error (ops are ECA...
- 09:15 PM Bug #22517 (Resolved): Cache never becoming consistent after failed updates
- 09:15 PM Backport #22575 (Resolved): jewel: Random 500 errors in Swift PutObject
- 04:37 PM Bug #22655 (Pending Backport): rgw: Location element not returned correctly from CompleteMultipar...
- 02:47 PM Bug #22729 (Pending Backport): rgw: copying part without http header "x-amz-copy-source-range" wi...
- 02:26 PM Backport #21695 (Resolved): luminous: failed CompleteMultipartUpload request does not release lock
- 12:11 PM Bug #22899 (New): tests: jewel: radosgw_admin.py fails with "No summary info found for user: foo"
- This task was completely revamped in master (and luminous, but not jewel) by a45ab45f74042617ec382f3d50f4d45d883042f5...
- 11:09 AM Backport #21950 (In Progress): jewel: rgw: null instance mtime incorrect when enable versioning
- 10:00 AM Bug #22897: rgw: (jewel) can't delete swift acls with swift command.
- There is no master PR yet, but the jewel backport is already a WIP in https://github.com/ceph/ceph/pull/20257
- 08:21 AM Bug #22897 (Resolved): rgw: (jewel) can't delete swift acls with swift command.
- The swift cli command can be used to set acls on buckets or objects: -r acl, -w acl. To *delete* an acl, it's suppos...
- 09:58 AM Backport #20587 (In Progress): jewel: radosgw/swift emulate split read/write acls?
- 09:57 AM Bug #19289 (Pending Backport): radosgw/swift emulate split read/write acls?
- 08:32 AM Bug #22898 (New): rgw: (jewel) swift acls and cross-tenant access.
- So this is a feature request for something we have in luminous, but it's come up a lot for jewel.
Keystone acl ele... - 08:03 AM Bug #22896 (New): rgw: (jewel) swift acls silently drop invalid acl elements.
- So, when specifying invalid elements in swift acls for jewel, ceph silently eats that acl element. This is not good ...
- 06:26 AM Backport #22893 (In Progress): luminous: rgw: S3 interface: X-Amz-Copy-Source must be URL-encoded
- 06:07 AM Bug #22731 (Duplicate): AWS V4 signature issue on Jewel
- 05:24 AM Backport #22858 (In Progress): luminous: beast: bind to specific ip address
- https://github.com/ceph/ceph/pull/20252
- 05:23 AM Backport #22753 (In Progress): luminous: multisite: trim bilogs as data sync peer zones catch up
- 05:15 AM Backport #21937 (In Progress): luminous: source data in 'default.rgw.buckets.data' may not be del...
- 05:15 AM Backport #22214 (In Progress): luminous: Bucket policy evaluation is not carried out for DeleteBu...
- 05:14 AM Backport #22259 (In Progress): jewel: rgw: swift anonymous access doesn't work in jewel
- 05:14 AM Backport #22638 (In Progress): jewel: rgw:lc: set LifecycleConfiguration without "Rule" tag retur...
- 05:13 AM Backport #22884 (In Progress): luminous: rgw: document civetweb ssl configuration
- 05:10 AM Documentation #13523: rgw: document civetweb ssl configuration
- @Casey: I thought I had added the "Pending Backport" status to the Documentation tracker already. . . should be fixed...
- 05:08 AM Documentation #13523 (Pending Backport): rgw: document civetweb ssl configuration
- 02:12 AM Bug #22895 (Resolved): radosgw not work after all rgw `RGWAsyncRadosProcessor had timed out
- Read and write continuously, and this error occurs after `logrotate's killall -q -1 ...` every day.
net.ipv4.t... - 12:05 AM Backport #22582: jewel: multisite: 'radosgw-admin sync error list' contains temporary EBUSY errors
- duelling backport PRs
- 12:02 AM Backport #22592: jewel: radosgw refuses upload when Content-Type missing from POST policy
- duelling backport PRs
02/01/2018
- 11:46 PM Backport #22894 (Resolved): jewel: rgw: ECANCELED in rgw_get_system_obj() leads to infinite loop
- https://github.com/ceph/ceph/pull/20561
- 11:44 PM Backport #22893 (Resolved): luminous: rgw: S3 interface: X-Amz-Copy-Source must be URL-encoded
- https://github.com/ceph/ceph/pull/20236
- 11:43 PM Backport #22890 (Rejected): jewel: rgw_file: avoid fragging thread_local log buffer
- 11:43 PM Backport #22889 (Resolved): luminous: rgw_file: avoid fragging thread_local log buffer
- https://github.com/ceph/ceph/pull/20345
- 11:40 PM Bug #17996 (Pending Backport): rgw: ECANCELED in rgw_get_system_obj() leads to infinite loop
- 11:39 PM Bug #17996: rgw: ECANCELED in rgw_get_system_obj() leads to infinite loop
- https://github.com/ceph/ceph/pull/11485 - specifically commit e67a3b5b5c63ee3a34f06bdbe91d3256c6660a89
- 11:20 PM Documentation #21610 (Resolved): remove region from "INSTALL CEPH OBJECT GATEWAY"
- 11:19 PM Backport #21631 (Resolved): luminous: remove region from "INSTALL CEPH OBJECT GATEWAY"
- 11:19 PM Backport #21632 (Resolved): jewel: remove region from "INSTALL CEPH OBJECT GATEWAY"
- 11:08 PM Bug #20935 (Resolved): rgw opslog cannot record referrer when using curl as client
- 11:08 PM Backport #22623 (Resolved): luminous: rgw opslog cannot record referrer when using curl as client
- 11:06 PM Bug #22600 (Resolved): compilation failures with boost 1.66
- 11:06 PM Backport #22621 (Resolved): luminous: compilation failures with boost 1.66
- 11:05 PM Bug #21015 (Resolved): rgw: make HTTP dechunking compatible with Amazon S3
- 11:05 PM Backport #22401 (Resolved): luminous: rgw: make HTTP dechunking compatible with Amazon S3
- 10:44 PM Backport #21873 (In Progress): jewel: failed CompleteMultipartUpload request does not release lock
- 10:42 PM Bug #21590: fix a bug about inconsistent unit of comparison
- Jewel backport is non-trivial - see -https://github.com/ceph/ceph/pull/18119-
- 08:44 PM Backport #22884: luminous: rgw: document civetweb ssl configuration
- https://github.com/ceph/ceph/pull/20242
- 08:36 PM Backport #22884 (Resolved): luminous: rgw: document civetweb ssl configuration
- https://github.com/ceph/ceph/pull/20242
- 08:33 PM Bug #22368: Problem with RGW multipart uploads with resharded buckets
- Hi Karol,
While the issues are separate, the backport for #21873 does include the single commit from this one. And... - 08:13 PM Bug #22368: Problem with RGW multipart uploads with resharded buckets
- @Casey Bodley: Are you sure marking this as duplicate of #21873 was correct? At least to me it looks like another pro...
- 06:45 PM Bug #22368 (Resolved): Problem with RGW multipart uploads with resharded buckets
- the backport is being tracked separately in #21873, closing this one
- 07:19 PM Bug #22721: Resharding hangs with versioning-enabled buckets
- potentially related to an infinite loop in bilist? http://tracker.ceph.com/issues/22737
- 07:18 PM Bug #22820 (Pending Backport): rgw_file: avoid fragging thread_local log buffer
- 07:15 PM Bug #22121: rgw: S3 interface: X-Amz-Copy-Source must be URL-encoded
- (luminous backport staged at https://github.com/ceph/ceph/pull/20236)
- 07:07 PM Bug #22121 (Pending Backport): rgw: S3 interface: X-Amz-Copy-Source must be URL-encoded
- 07:10 PM Bug #22883 (New): rgw: bucket link doesn't change ownership of objects residing in the bucket
- One option is when creating objects acls, instead of using the bucket owner uid, use a different representation that ...
- 06:53 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- I still suspect that it relates to incomplete bucket index changes. These eventually get fixed through the dir_sugges...
- 03:49 PM Bug #22877 (Resolved): rgw: elastic plugin doesn't seem to work with ES 6
- Looks like ES 6 is stricter in expecting to see content type in headers, and additionally deprecation of "string" fie...
- 03:13 PM Backport #21791 (In Progress): jewel: RGW: Multipart upload may double the quota
- 03:05 PM Bug #20107: rgw: Truncated objects
- Note there are two commits (in two different PRs) that are needed to fix this. See the jewel backport.
- 03:04 PM Bug #20107 (Pending Backport): rgw: Truncated objects
- 03:04 PM Backport #20719 (In Progress): jewel: rgw: Truncated objects
- 03:03 PM Bug #22852 (Fix Under Review): rgw: can't download object with range when compression enabled
- 10:43 AM Bug #22852: rgw: can't download object with range when compression enabled
- https://github.com/ceph/ceph/pull/20226
- 10:06 AM Bug #22852 (Resolved): rgw: can't download object with range when compression enabled
- Reproduce issue by steps:
1. enable compression
2. create a bucket
3. upload an object
4. download the object wit... - 02:39 PM Bug #22731: AWS V4 signature issue on Jewel
- 02:38 PM Bug #22731: AWS V4 signature issue on Jewel
- older backport PR--one of these will merge shortly
https://github.com/ceph/ceph/pull/17731 - 02:21 PM Bug #22731: AWS V4 signature issue on Jewel
- Matt Benjamin wrote:
> The following backport PR against Jewel resolves the issue for me:
>
> https://github.com/... - 12:35 PM Bug #22870 (New): rgw: bucket stats size_actual is incorrect
- Create a bucket with one object of 1913 size, the bucket actual size is 4096
radosgw-admin bucket stats --bucket m... - 10:49 AM Backport #22858 (Resolved): luminous: beast: bind to specific ip address
- https://github.com/ceph/ceph/pull/20252
01/31/2018
- 10:20 PM Feature #22604: Command to inspect the RGW cache
- 10:19 PM Feature #22603: Command to invalidate cache
- 06:10 PM Bug #22844: rgw: do not reflect period if not current in RGWPeriodPuller::pull
- 05:32 PM Bug #22844: rgw: do not reflect period if not current in RGWPeriodPuller::pull
- https://github.com/ceph/ceph/pull/20212
- 05:30 PM Bug #22844 (Resolved): rgw: do not reflect period if not current in RGWPeriodPuller::pull
- if some history period not exist in local, it will pull from master and update the old info to zonegroup.
- 03:31 PM Bug #22124 (In Progress): rgw: user stats increased after bucket reshard
- 09:31 AM Backport #22210 (Resolved): luminous: radosgw-admin zonegroup get and zone get should return defa...
- 08:56 AM Bug #22838: slave zone, `bucket stats`,the result of 'num_objects' is incorrect.
- radosgw-admin bucket check --fix --check-objects --bucket=mix100krw01312
{
"existing_header": {
"... - 07:05 AM Bug #22838 (Duplicate): slave zone, `bucket stats`,the result of 'num_objects' is incorrect.
# radosgw-admin bucket stats --bucket=mix100krw01312 --sync-stats
{
"bucket": "mix100krw01312",
"zon...- 12:58 AM Bug #22833 (Fix Under Review): rgw: crash in RGWSyncTraceManager::finish_node()
- https://github.com/ceph/ceph/pull/20191
01/30/2018
- 11:39 PM Bug #22833 (Resolved): rgw: crash in RGWSyncTraceManager::finish_node()
- Reported by mkogan:...
- 07:16 PM Feature #22832 (Resolved): SSL support for beast frontend
- boost::asio provides an ssl stream wrapper based on the openssl library. initial integration should be relatively str...
- 06:57 PM Documentation #13523: rgw: document civetweb ssl configuration
- @Nathan, I'd like to get this documentation backported to luminous, but it won't let me change the `Status` here
a... - 06:52 PM Feature #22779 (Fix Under Review): beast: listen on multiple endpoints
- https://github.com/ceph/ceph/pull/20188
- 05:57 PM Support #22822: RGW multi site issue - data sync: ERROR: failed to fetch datalog info
- ok that problem was related with the network error. We can skip that :)
- 05:21 PM Feature #22778 (Pending Backport): beast: bind to specific ip address
- 09:20 AM Bug #22777: uniqueness of rgw service name not guaranteed
- I also noticed this problem while I impl the RGW page in mgr/dashboard. RGW daemons report their status via service n...
- 06:53 AM Backport #22830: jewel: expose --sync-stats via admin api
- https://github.com/ceph/ceph/pull/20179
- 06:53 AM Backport #22830 (Resolved): jewel: expose --sync-stats via admin api
- https://github.com/ceph/ceph/pull/20179
01/29/2018
- 10:24 PM Backport #22177 (Resolved): luminous: rgw: lifecycle process may block RGWRealmReloader::reload
- 04:09 PM Backport #22177: luminous: rgw: lifecycle process may block RGWRealmReloader::reload
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/19088
merged - 10:23 PM Bug #22234 (Resolved): rgw usage trim only trims a few entries
- 10:23 PM Backport #22506 (Resolved): luminous: rgw usage trim only trims a few entries
- 04:08 PM Backport #22506: luminous: rgw usage trim only trims a few entries
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/19636
merged - 10:19 PM Backport #22581 (Resolved): luminous: multisite: 'radosgw-admin sync error list' contains tempora...
- 04:06 PM Backport #22581: luminous: multisite: 'radosgw-admin sync error list' contains temporary EBUSY er...
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/19799
merged - 10:18 PM Backport #22591 (Resolved): luminous: radosgw refuses upload when Content-Type missing from POST ...
- 04:03 PM Backport #22591: luminous: radosgw refuses upload when Content-Type missing from POST policy
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/19867
merged - 10:18 PM Bug #22792 (Resolved): rgw distributes cache updates on exclusive creates
- 10:17 PM Backport #22805 (Resolved): luminous: rgw distributes cache updates on exclusive creates
- 03:56 PM Backport #22805: luminous: rgw distributes cache updates on exclusive creates
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/20107
merged - 09:04 PM Bug #22296 (Resolved): Librgw shutdown uncorreclty
- 09:04 PM Backport #22767 (Resolved): luminous: Librgw shutdown uncorreclty
- 03:57 PM Backport #22767: luminous: Librgw shutdown uncorreclty
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/20073
merged - 04:47 PM Backport #22773 (Resolved): luminous: rgw file deadlock on lru evicting
- 03:57 PM Backport #22773: luminous: rgw file deadlock on lru evicting
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/20075
merged - 04:17 PM Bug #22827: rgw_file: FLAG_EXACT_MATCH actually should be enforced
- Revert is:
https://github.com/ceph/ceph/pull/20171
No backport required--we will avoid taking the "disable FLAG_E... - 04:14 PM Bug #22827 (Resolved): rgw_file: FLAG_EXACT_MATCH actually should be enforced
- Testing before reverting it was incomplete.
Steps to Reproduce:
1. Configure NFS-RGW
2. On the mount point, crea... - 04:10 PM Bug #22084: Swift object expiry incorrectly trims entries, leaving behind some of the objects to ...
- https://github.com/ceph/ceph/pull/18972 merged
- 04:10 PM Backport #22210: luminous: radosgw-admin zonegroup get and zone get should return defaults when t...
- Nathan Cutler wrote:
> https://github.com/ceph/ceph/pull/19086
merged - 04:07 PM Bug #20201: radosgw refuses upload when Content-Type missing from POST policy
- https://github.com/ceph/ceph/pull/19784 merged
- 03:48 PM Bug #22632: radosgw - s3 keystone integration doesn't work while using civetweb as frontend
- Can you provide us the rgw logs with debug rgw=20 and debug ms=1 set in ceph.conf
- 02:08 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- Checked on current jewel, the issue did not reproduce
num_objects is 50000 is the second zone.... - 01:18 PM Bug #22826 (In Progress): "x-amz-content-sha256: STREAMING-AWS4-HMAC-SHA256-PAYLOAD" is not suppo...
- request & response:
PUT /bucket1/test.pdf?uploadId=2%7ELJHM5ZQxPXBzDDK5cG4RG_j9bcKXvI5&partNumber=1 HTTP/1.1
Host... - 06:50 AM Bug #22825: The parameter of max-uploads doesn't work when List Multipart Uploads
- xin liao wrote:
> fix:[[https://github.com/ceph/ceph/pull/20158]]
- 06:50 AM Bug #22825: The parameter of max-uploads doesn't work when List Multipart Uploads
- fix:https://github.com/ceph/ceph/pull/20158
- 06:30 AM Bug #22825 (Resolved): The parameter of max-uploads doesn't work when List Multipart Uploads
- List Multipart Uploads returns at most 1,000 multipart uploads in the response. 1,000 multipart uploads is the defaul...
- 05:10 AM Backport #22812 (In Progress): luminous: Civetweb reports bad response code.
- https://github.com/ceph/ceph/pull/20157
01/28/2018
- 08:16 PM Support #22822 (New): RGW multi site issue - data sync: ERROR: failed to fetch datalog info
- I have noticed a strange issue. My synchronization worked quite ok for a some while.. But today in on one site I have...
01/27/2018
- 11:41 PM Bug #22820: rgw_file: avoid fragging thread_local log buffer
- https://github.com/ceph/ceph/pull/20145
- 09:38 PM Bug #22820 (Resolved): rgw_file: avoid fragging thread_local log buffer
- I don't think sending Log a nullptr /should/ cause future log messages to be suppressed, but that does currently happ...
- 09:33 PM Feature #22604 (Fix Under Review): Command to inspect the RGW cache
- https://github.com/ceph/ceph/pull/20144
- 09:32 PM Feature #22603 (Fix Under Review): Command to invalidate cache
- https://github.com/ceph/ceph/pull/20144
01/26/2018
- 09:18 PM Feature #20473 (Fix Under Review): RGW Multi-site radosgw-admin sync status and radosgw-admin buc...
- PRs:
https://github.com/ceph/ceph/pull/19573
https://github.com/ceph/ceph/pull/20027
-https://github.com/ceph/ce... - 05:44 PM Backport #22805 (In Progress): luminous: rgw distributes cache updates on exclusive creates
- 08:00 AM Backport #22805 (Resolved): luminous: rgw distributes cache updates on exclusive creates
- https://github.com/ceph/ceph/pull/20107
- 12:02 PM Bug #22352: rados gateway computes wrong AWS4 signature if canonical request contains the tilde (...
- Hello,
yes it looks like the same issue. Thanks
Saverio - 08:50 AM Bug #20696: radosgw doesn't start with civetweb handlerin Debian Stretch
- Tomas Mores wrote:
> Yes, i am using Debian 9 + CEPH Luminous and "load_dll: libcrypto.so.1.1: cannot find CRYPTO_nu... - 08:43 AM Bug #20696: radosgw doesn't start with civetweb handlerin Debian Stretch
- Yes, i am using Debian 9 + CEPH Luminous and "load_dll: libcrypto.so.1.1: cannot find CRYPTO_num_locks" error is stil...
- 08:03 AM Backport #22813 (Rejected): jewel: multisite: trim bilogs as data sync peer zones catch up
- 08:01 AM Backport #22812 (Resolved): luminous: Civetweb reports bad response code.
- https://github.com/ceph/ceph/pull/20157
- 06:35 AM Bug #22804 (Resolved): multisite Synchronization failed when read and write delete at the same time
- ...
- 01:03 AM Bug #22731: AWS V4 signature issue on Jewel
- I believe so, but waiting for confirmation
Matt - 12:58 AM Bug #22731: AWS V4 signature issue on Jewel
- So this is a duplicate of #20463
- 12:00 AM Bug #22731: AWS V4 signature issue on Jewel
- Matt Benjamin wrote:
> The following backport PR against Jewel resolves the issue for me:
>
> https://github.com/... - 12:37 AM Bug #22685 (Duplicate): create user, but uid error
- 12:28 AM Feature #18229 (Pending Backport): multisite: trim bilogs as data sync peer zones catch up
- 12:23 AM Documentation #13670 (Duplicate): rgw frontends not mentioned in radosgw config-ref
- 12:20 AM Documentation #13523 (Fix Under Review): rgw: document civetweb ssl configuration
01/25/2018
- 09:41 PM Bug #22352: rados gateway computes wrong AWS4 signature if canonical request contains the tilde (...
- Hi Saverio,
Could you please review the comments for http://tracker.ceph.com/issues/22731, which may overlap? A c... - 09:38 PM Bug #22731: AWS V4 signature issue on Jewel
- The following backport PR against Jewel resolves the issue for me:
https://github.com/ceph/ceph/pull/20123 - 08:18 PM Bug #22797: beast gets SignatureDoesNotMatch in v4 auth
- 05:13 PM Bug #22797 (Fix Under Review): beast gets SignatureDoesNotMatch in v4 auth
- https://github.com/ceph/ceph/pull/20120
- 03:31 PM Bug #22797 (Resolved): beast gets SignatureDoesNotMatch in v4 auth
- 07:32 PM Feature #22800 (Rejected): radosgw-admin orphans rm
- radosgw-admin orphans find/finish gives us a list of orphan objects but we do not have the command to delete these le...
- 06:55 PM Bug #22729 (In Progress): rgw: copying part without http header "x-amz-copy-source-range" will be...
- 06:54 PM Bug #22737 (In Progress): rgw: list bilog will loop forever
- 06:48 PM Bug #20696: radosgw doesn't start with civetweb handlerin Debian Stretch
- Is this reproducible in Luminous as well (we had a major civewteb update in Luminous so might have already been fixed...
- 06:47 PM Bug #20696: radosgw doesn't start with civetweb handlerin Debian Stretch
- jewel may need a cherry-pick of https://github.com/civetweb/civetweb/commit/5d83900fd29fb6fa1cd604676cb0562dc984dcc9;
- 11:12 AM Bug #20696: radosgw doesn't start with civetweb handlerin Debian Stretch
- Is there any advance please?
- 06:45 PM Bug #22248: system user can't delete bucket completely
- 06:44 PM Bug #22799: multisite: RGWCompletionManager::get_next stuck in cond.wait after going down
- 06:09 PM Bug #22799: multisite: RGWCompletionManager::get_next stuck in cond.wait after going down
- fixed in https://github.com/ceph/ceph/pull/20095
- 06:09 PM Bug #22799 (Fix Under Review): multisite: RGWCompletionManager::get_next stuck in cond.wait after...
- the situation cond.Signal() in going_down called fist then get_next go into cond.wait()
- 06:42 PM Bug #22758 (In Progress): rgw sends garbage meta.compression to ElasticSearch
- 06:41 PM Bug #22130 (Resolved): Custom root pools: default zonegroup is not found by radosgw-admin or radosgw
- resolved as per last comment
- 06:39 PM Bug #22015 (Pending Backport): Civetweb reports bad response code.
- 12:40 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- The issues does not reproduce with current upstream ceph luminous
On several itterations of running cosbench workl...
01/24/2018
- 09:53 PM Bug #22792: rgw distributes cache updates on exclusive creates
- luminous PR https://github.com/ceph/ceph/pull/20107
- 09:17 PM Bug #22792 (Resolved): rgw distributes cache updates on exclusive creates
- https://github.com/ceph/ceph/pull/19384
- 09:39 PM Bug #22790: Intermittent http_status=409 with op status=-17 on ceph rgw with compression enabled
- attached a python script to reproduce this failure:...
- 07:14 PM Bug #22790: Intermittent http_status=409 with op status=-17 on ceph rgw with compression enabled
- the relevant block of code in RGWPutObj::execute():...
- 06:33 PM Bug #22790 (Resolved): Intermittent http_status=409 with op status=-17 on ceph rgw with compressi...
- Intermittent http_status=409 with op status=-17 on ceph rgw with compression enabled
RHT Bug - https://bugzilla.redh... - 04:23 PM Bug #22062 (Resolved): rgw: multisite with jewel as master will not sync data
- 04:23 PM Backport #22183 (Resolved): luminous: rgw: multisite with jewel as master will not sync data
- 03:04 PM Backport #22183: luminous: rgw: multisite with jewel as master will not sync data
- Prashant D wrote:
> https://github.com/ceph/ceph/pull/19038
merged - 03:51 PM Feature #22778: beast: bind to specific ip address
- 02:54 PM Bug #18260: When uploading a large number of objects constantly, the objects number of bucket is ...
- Mark Kogan reported on Jan 24 that he's trying to reproduce the issue. He tried to reproduce the issue with rgw_num_r...
- 10:23 AM Bug #22783 (New): NFS-RGW: unable to read bs=4m
- NFS-Ganesha v2.5.2
Upstream nfs-ganesha issue: https://github.com/nfs-ganesha/nfs-ganesha/issues/243
As Dan menti... - 09:00 AM Backport #22703 (In Progress): jewel: rgw: offline resharding doesn't seem to preserve bucket acls
- 08:35 AM Backport #22703: jewel: rgw: offline resharding doesn't seem to preserve bucket acls
- I'm guessing this can be closed because the master PR was closed and a jewel-only fix was proposed.
- 08:58 AM Bug #22742 (Fix Under Review): rgw: resharding doesn't seem to preserve bucket acls
- https://github.com/ceph/ceph/pull/20038
- 08:33 AM Bug #22742 (In Progress): rgw: resharding doesn't seem to preserve bucket acls
- 08:30 AM Bug #22742 (New): rgw: resharding doesn't seem to preserve bucket acls
- Master PR -https://github.com/ceph/ceph/pull/20037- was closed.
- 08:57 AM Bug #22202: rgw_statfs should report the correct stats
- supriti singh wrote:
> Matt Benjamin wrote:
> > ping?
>
> Hi Matt,
>
> Sorry for delay. I have picked up work... - 05:59 AM Bug #21962 (Resolved): Policy parser may or may not dereference uninitialized boost::optional som...
- 05:59 AM Backport #22026 (Resolved): luminous: Policy parser may or may not dereference uninitialized boos...
- 05:58 AM Bug #21895 (Resolved): multisite: destination zone does not compress synced objects
- 05:58 AM Backport #22027 (Resolved): luminous: multisite: destination zone does not compress synced objects
- 05:57 AM Backport #21949 (Resolved): luminous: rgw: null instance mtime incorrect when enable versioning
- 05:56 AM Bug #22122 (Resolved): rgw: bucket index object not deleted after radosgw-admin bucket rm --purge...
- 05:56 AM Backport #22215 (Resolved): luminous: rgw: bucket index object not deleted after radosgw-admin bu...
- 05:55 AM Bug #22046 (Resolved): Dynamic bucket indexing, resharding and tenants seems to be broken
- 05:55 AM Backport #22184 (Resolved): luminous: Dynamic bucket indexing, resharding and tenants seems to be...
- 05:54 AM Backport #22187 (Resolved): luminous: rgw: add cors header rule check in cors option request
- 04:36 AM Bug #22731: AWS V4 signature issue on Jewel
- Hi Yuan,
Yes, I've reproduced this issue on v10.2.10, as you do. This is good news, upstream is missing a fix al... - 12:52 AM Bug #22731: AWS V4 signature issue on Jewel
- Hi Matt,
I've also got some updates:
changing the signature type to v2 can work around this issue....
01/23/2018
- 09:41 PM Bug #22731: AWS V4 signature issue on Jewel
- I have verified identical results (successful multipart uploads from application using aws-java-sdk-bundle-1.11.199.j...
- 08:25 PM Bug #22731: AWS V4 signature issue on Jewel
- Hi Yuan,
I've been trying to reproduce against master--not seeing any error there
1. using the desired aws-jav... - 09:02 PM Feature #22779 (Resolved): beast: listen on multiple endpoints
- 06:14 PM Feature #22778 (Resolved): beast: bind to specific ip address
- https://github.com/ceph/ceph/pull/20000
- 05:16 PM Feature #13718 (Resolved): rgw:CivetWeb http and https be support in the same time.
- this merged in https://github.com/ceph/ceph/pull/11776
- 04:37 PM Bug #22745: can not set user quota with specific value
- https://github.com/ceph/ceph/pull/20063
- 03:58 PM Bug #22777 (New): uniqueness of rgw service name not guaranteed
- Historically in our deployment we reuse the same client.radosgw key for all rgw's.
During the jewel/luminous upgrade... - 03:21 PM Bug #12182 (Closed): Data asynchronous sync failed in federated gateway
- The agent is no longer a supported tool.
- 03:19 PM Feature #6877 (Closed): tool to trim metadata, data, and bucket index logs
- 03:02 PM Bug #11355 (Closed): simplified approach for setting up a (federated) rgw
- 02:36 PM Bug #22084 (Resolved): Swift object expiry incorrectly trims entries, leaving behind some of the ...
- 02:36 PM Backport #22180 (Resolved): jewel: Swift object expiry incorrectly trims entries, leaving behind ...
- 11:22 AM Bug #22775: rgw: multisite: the huge object sync is slow in unstable network environment
- wrong spell, the title should be "rgw: multisite: the huge object sync is slow in unstable network environment"
- 11:03 AM Bug #22775: rgw: multisite: the huge object sync is slow in unstable network environment
- https://github.com/ceph/ceph/pull/20036
- 11:02 AM Bug #22775 (Fix Under Review): rgw: multisite: the huge object sync is slow in unstable network e...
- The huge object sync is slow because request often time out when the network is not stable
- 11:02 AM Backport #22703 (New): jewel: rgw: offline resharding doesn't seem to preserve bucket acls
- -This ticket is for the master fix, but I don't see a master PR?-
Master PR: -https://github.com/ceph/ceph/pull/20... - 10:49 AM Bug #22364 (Resolved): log rotate causes rgw realm reload
- 10:48 AM Backport #22365 (Resolved): luminous: log rotate causes rgw realm reload
- 10:48 AM Backport #22397 (Resolved): luminous: rgw: radosgw-admin reshard command argument error.
- 10:48 AM Bug #21723 (Resolved): rgw: radosgw-admin reshard command argument error.
- 10:45 AM Backport #22774 (In Progress): jewel: rgw file deadlock on lru evicting
- 10:43 AM Backport #22774 (Resolved): jewel: rgw file deadlock on lru evicting
- https://github.com/ceph/ceph/pull/20076
- 10:45 AM Backport #22773 (In Progress): luminous: rgw file deadlock on lru evicting
- 10:43 AM Backport #22773 (Resolved): luminous: rgw file deadlock on lru evicting
- https://github.com/ceph/ceph/pull/20075
- 10:43 AM Bug #22736 (Pending Backport): rgw file deadlock on lru evicting
- https://github.com/ceph/ceph/pull/20034
- 10:36 AM Backport #22772 (In Progress): jewel: user creation can overwrite existing user even if different...
- 09:42 AM Backport #22772 (Resolved): jewel: user creation can overwrite existing user even if different ui...
- https://github.com/ceph/ceph/pull/20074
- 10:35 AM Backport #22767 (In Progress): luminous: Librgw shutdown uncorreclty
- 09:40 AM Backport #22767 (Resolved): luminous: Librgw shutdown uncorreclty
- https://github.com/ceph/ceph/pull/20073
- 10:27 AM Backport #22766 (In Progress): luminous: RGW doesn't check time skew in auth v4 http header request
- 09:40 AM Backport #22766 (Resolved): luminous: RGW doesn't check time skew in auth v4 http header request
- https://github.com/ceph/ceph/pull/20072
- 09:42 AM Bug #22685: create user, but uid error
- @Casey, @Matt - can we change the link to #21685 from "Related to" to "Duplicates"? And change status from "Pending B...
- 03:55 AM Bug #22758 (Resolved): rgw sends garbage meta.compression to ElasticSearch
- Once compression is enabled for a zone, metadata indexing on elasticsearch stops working.
Here is how to reproduce... - 12:51 AM Bug #22756: RGW will not list contents of older buckets at all: reshard makes it show up again
- As shown, resharding the bucket will make the content show up again; but you have to know that it is missing first. o...
- 12:47 AM Bug #22756: RGW will not list contents of older buckets at all: reshard makes it show up again
- ...
- 12:37 AM Bug #22756 (Won't Fix): RGW will not list contents of older buckets at all: reshard makes it show...
- This is very similar to bug 17372 at the face, but different underneath. Luminous does contain the fix for bug 17372 ...
01/22/2018
- 10:08 PM Feature #18229: multisite: trim bilogs as data sync peer zones catch up
- @Nathan you're right, luminous first. i'll attempt a jewel backport when i get a chance
- 10:07 PM Backport #22753: luminous: multisite: trim bilogs as data sync peer zones catch up
- https://github.com/ceph/ceph/pull/20062
- 10:06 PM Backport #22753 (Resolved): luminous: multisite: trim bilogs as data sync peer zones catch up
- https://github.com/ceph/ceph/pull/20062
- 09:40 PM Backport #18277 (In Progress): jewel: multisite: trim data changes log as peers zones catch up
- https://github.com/ceph/ceph/pull/20061
- 07:48 PM Documentation #13523: rgw: document civetweb ssl configuration
- https://github.com/ceph/ceph/pull/20058
adds basic documentation for rgw_frontend options - 04:11 PM Bug #22124: rgw: user stats increased after bucket reshard
- @Zongyou Yao thanks for catching this.
I revert the pr and I will try a different fix. - 11:36 AM Bug #22124: rgw: user stats increased after bucket reshard
- I will check it
- 10:41 AM Bug #22745 (Resolved): can not set user quota with specific value
- I used the admin rest api to operate user:
1. create a user with default max buckets(1000).
2. modify the max bucke... - 01:20 AM Documentation #13670: rgw frontends not mentioned in radosgw config-ref
- Civetweb supports listen on specific IP:port already, the code snip is listed below
https://github.com/ceph/civetweb...
01/21/2018
- 10:25 AM Backport #22703 (Fix Under Review): jewel: rgw: offline resharding doesn't seem to preserve bucke...
- https://github.com/ceph/ceph/pull/20039 (jewel-only fix)
- 08:20 AM Bug #22742 (Fix Under Review): rgw: resharding doesn't seem to preserve bucket acls
- 08:20 AM Bug #22742: rgw: resharding doesn't seem to preserve bucket acls
- -https://github.com/ceph/ceph/pull/20037-
- 08:20 AM Bug #22742 (Resolved): rgw: resharding doesn't seem to preserve bucket acls
- Created a public bucket; after resharding the acls do not seem to have been retained...
01/20/2018
- 04:30 PM Bug #22151 (Resolved): rgw: log keystone errors at a higher level
- 04:28 PM Bug #21901 (Resolved): Bucket Policy Evaluation Logical Error
- 04:28 PM Backport #22602 (Resolved): luminous: Bucket Policy Evaluation Logical Error
- 04:28 PM Bug #22541 (Resolved): put bucket policy panics RGW process
- 04:27 PM Backport #22618 (Resolved): luminous: put bucket policy panics RGW process
- 04:27 PM Backport #22583 (Resolved): luminous: rgw: chained cache size is growing above rgw_cache_lru_size...
- 04:25 PM Backport #22588 (Resolved): luminous: rgw: put cors operation returns 500 unknown error (ops are ...
- 04:24 PM Backport #22574 (Resolved): luminous: Random 500 errors in Swift PutObject
- 04:20 PM Bug #20991 (Resolved): S3 API Policy Conditions IpAddress and NotIpAddress do not work
- 04:20 PM Backport #22601 (Resolved): luminous: S3 API Policy Conditions IpAddress and NotIpAddress do not ...
- 12:42 PM Backport #22017 (Resolved): luminous: Segmentation fault when starting radosgw after reverting .r...
- 12:42 PM Bug #21980 (Resolved): RGWCrashError: RGW will crash if a putting lc config request does not incl...
- 12:42 PM Backport #22024 (Resolved): luminous: RGWCrashError: RGW will crash if a putting lc config reques...
- 12:41 PM Bug #22006 (Resolved): RGWCrashError: RGW will crash when generating random bucket name and objec...
- 12:41 PM Backport #22016 (Resolved): luminous: RGWCrashError: RGW will crash when generating random bucket...
- 12:41 PM Backport #22021 (Resolved): luminous: rgw: modify s3 type subuser access permission fail
- 12:40 PM Backport #22179 (Resolved): luminous: Swift object expiry incorrectly trims entries, leaving behi...
Also available in: Atom