root@ceph2:/var/log/ceph# dmesg|more [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-23-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #35~precise1-U buntu SMP Fri Jan 25 17:13:26 UTC 2013 (Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=4fc8f4fd-c744-4ae8-8087-10959bf9d91f ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7f8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7f9e000-0x00000000d7f9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d7fa0000-0x00000000d7fadfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d7fae000-0x00000000d7fdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d7fe0000-0x00000000d7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: HP ProLiant MicroServer, BIOS O41 01/17/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000220000000 aka 8704M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xd7f90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0xd7f8ffff] [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xd7dfffff] page 2M [ 0.000000] [mem 0xd7e00000-0xd7f8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xd7f8ffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x21fffffff @ [mem 0xd7f8e000-0xd7f8ffff] [ 0.000000] RAMDISK: [mem 0x3624a000-0x3711cfff] [ 0.000000] ACPI: RSDP 00000000000f8f50 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000d7fa0100 0007C (v01 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: FACP 00000000d7fa0290 000F4 (v03 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: DSDT 00000000d7fa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117) [ 0.000000] ACPI: FACS 00000000d7fae000 00040 [ 0.000000] ACPI: APIC 00000000d7fa0390 00072 (v01 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: MCFG 00000000d7fa0410 0003C (v01 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: SPMI 00000000d7fa0450 00041 (v05 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: OEMB 00000000d7fae040 00072 (v01 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: HPET 00000000d7fab4e0 00038 (v01 HP ProLiant 20110117 HP 00000097) [ 0.000000] ACPI: EINJ 00000000d7fab520 00130 (v01 AMIER AMI_EINJ 20110117 HP 00000097) [ 0.000000] ACPI: BERT 00000000d7fab6b0 00030 (v01 AMIER AMI_BERT 20110117 HP 00000097) [ 0.000000] ACPI: ERST 00000000d7fab6e0 001B0 (v01 AMIER AMI_ERST 20110117 HP 00000097) [ 0.000000] ACPI: HEST 00000000d7fab890 000A8 (v01 AMIER ABC_HEST 20110117 HP 00000097) [ 0.000000] ACPI: SSDT 00000000d7fab940 00386 (v01 HP ProLiant 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff] [ 0.000000] NODE_DATA [mem 0x21fffc000-0x21fffffff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217800000-ffff88021f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xd7f8ffff] [ 0.000000] node 0: [mem 0x100000000-0x21fffffff] [ 0.000000] On node 0 totalpages: 2064158 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 864208 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1161216 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000d7f90000 - 00000000d7f9e000 [ 0.000000] PM: Registered nosave memory: 00000000d7f9e000 - 00000000d7fa0000 [ 0.000000] PM: Registered nosave memory: 00000000d7fa0000 - 00000000d7fae000 [ 0.000000] PM: Registered nosave memory: 00000000d7fae000 - 00000000d7fe0000 [ 0.000000] PM: Registered nosave memory: 00000000d7fe0000 - 00000000d8000000 [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000ffa00000 [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000 [ 0.000000] e820: [mem 0xf0000000-0xff9fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s83584 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2029336 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=4fc8f4fd-c744-4ae8-8087-10959bf9d91f ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ afc000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000 [ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000 [ 0.000000] Memory: 7964524k/8912896k available (6828k kernel code, 656264k absent, 292108k reserved, 6342k data, 948k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33030144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.008000] TSC: PIT calibration matches HPET. 2 loops [ 0.008000] Detected 1297.824 MHz processor. [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.64 BogoMIPS (lpj=5191296) [ 0.000025] pid_max: default: 32768 minimum: 301 [ 0.000065] Security Framework initialized [ 0.000089] AppArmor: AppArmor initialized [ 0.000094] Yama: becoming mindful. [ 0.001139] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005353] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007198] Mount-cache hash table entries: 256 [ 0.007528] Initializing cgroup subsys cpuacct [ 0.007535] Initializing cgroup subsys memory [ 0.007551] Initializing cgroup subsys devices [ 0.007557] Initializing cgroup subsys freezer [ 0.007562] Initializing cgroup subsys blkio [ 0.007567] Initializing cgroup subsys perf_event [ 0.007609] tseg: 0000000000 [ 0.007631] CPU: Physical Processor ID: 0 [ 0.007636] CPU: Processor Core ID: 0 [ 0.007641] mce: CPU supports 6 MCE banks [ 0.007652] LVT offset 0 assigned for vector 0xf9 [ 0.007662] using AMD E400 aware idle routine [ 0.010251] ACPI: Core revision 20120320 [ 0.016552] ftrace: allocating 27653 entries in 109 pages [ 0.038779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079188] CPU0: AMD Athlon(tm) II Neo N36L Dual-Core Processor stepping 03 [ 0.184021] Performance Events: AMD PMU driver. [ 0.184030] ... version: 0 [ 0.184034] ... bit width: 48 [ 0.184038] ... generic registers: 4 [ 0.184042] ... value mask: 0000ffffffffffff [ 0.184046] ... max period: 00007fffffffffff [ 0.184050] ... fixed-purpose events: 0 [ 0.184054] ... event mask: 000000000000000f [ 0.184284] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.184443] Booting Node 0, Processors #1 [ 0.197533] Brought up 2 CPUs [ 0.197540] Total of 2 processors activated (5191.29 BogoMIPS). [ 0.197548] System has AMD C1E enabled [ 0.197576] Switch to broadcast mode on CPU1 [ 0.198521] Switch to broadcast mode on CPU0 [ 0.198873] devtmpfs: initialized [ 0.202264] EVM: security.selinux [ 0.202269] EVM: security.SMACK64 [ 0.202272] EVM: security.capability [ 0.202454] PM: Registering ACPI NVS region [mem 0xd7fae000-0xd7fdffff] (204800 bytes) [ 0.203820] dummy: [ 0.203862] RTC time: 7:30:11, date: 05/31/13 [ 0.203929] NET: Registered protocol family 16 [ 0.204119] Trying to unpack rootfs image as initramfs... [ 0.204166] node 0 link 0: io port [1000, ffffff] [ 0.204171] TOM: 00000000e0000000 aka 3584M [ 0.204181] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.204186] node 0 link 0: mmio [a0000, bffff] [ 0.204190] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff] [ 0.204195] node 0 link 0: mmio [f8000000, fe5fffff] [ 0.204198] node 0 link 0: mmio [fe600000, fe7fffff] [ 0.204201] node 0 link 0: mmio [fe800000, ffdfffff] [ 0.204204] TOM2: 0000000220000000 aka 8704M [ 0.204209] bus: [00, 1f] on node 0 link 0 [ 0.204212] bus: 00 [io 0x0000-0xffff] [ 0.204215] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.204217] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.204219] bus: 00 [mem 0x220000000-0xfcffffffff] [ 0.204300] ACPI: bus type pci registered [ 0.204390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.204399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.228355] PCI: Using configuration type 1 for base access [ 0.230152] bio: create slab at 0 [ 0.230310] ACPI: Added _OSI(Module Device) [ 0.230316] ACPI: Added _OSI(Processor Device) [ 0.230321] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.230326] ACPI: Added _OSI(Processor Aggregator Device) [ 0.231647] ACPI: EC: Look up EC in DSDT [ 0.233115] ACPI: Executed 2 blocks of module-level executable AML code [ 0.238712] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.281712] ACPI: OEMN 00000000d7faaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117) [ 0.282094] ACPI: Dynamic OEM Table Load: [ 0.282101] ACPI: OEMN (null) 00624 (v01 AMD NAHP 00000001 INTL 20051117) [ 0.317791] \_SB_:_OSC evaluation returned wrong type [ 0.317797] _OSC request data:1 17 [ 0.318028] ACPI: Interpreter enabled [ 0.318038] ACPI: (supports S0 S4 S5) [ 0.318070] ACPI: Using IOAPIC for interrupt routing [ 0.323900] ACPI: No dock devices found. [ 0.323953] HEST: Table parsing has been initialized. [ 0.323961] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.324951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.325724] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.325732] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.325740] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.325747] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.325755] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff] [ 0.325762] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.325770] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff] [ 0.325777] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.325786] pci_root PNP0A08:00: host bridge window expanded to [mem 0xd8000000-0xdfffffff]; [mem 0xd8000000-0xdfffffff] ignor ed [ 0.325796] pci_root PNP0A08:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xffffffff] ignor ed [ 0.325809] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x00 0cf000-0x000d19ff]) [ 0.325861] PCI host bridge to bus 0000:00 [ 0.325868] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.325874] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.325880] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.325887] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xdfffffff] [ 0.325893] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.325916] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.326000] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400 [ 0.326060] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.326117] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.326180] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.326236] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.326280] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.326307] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.326319] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.326332] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.326344] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.326356] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.326369] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff] [ 0.326453] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.326470] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff] [ 0.326556] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.326579] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff] [ 0.326676] pci 0000:00:12.2: supports D1 D2 [ 0.326680] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.326709] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.326726] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff] [ 0.326816] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.326839] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff] [ 0.326936] pci 0000:00:13.2: supports D1 D2 [ 0.326940] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.326969] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.327058] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.327075] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.327087] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.327099] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.327112] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.327124] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.327169] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.327260] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.327317] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.327334] pci 0000:00:16.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff] [ 0.327420] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.327443] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff] [ 0.327541] pci 0000:00:16.2: supports D1 D2 [ 0.327544] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.327572] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.327605] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.327628] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.327652] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.327682] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.327748] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000 [ 0.327762] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.327770] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff] [ 0.327778] pci 0000:01:05.0: reg 18: [mem 0xfe7f0000-0xfe7fffff] [ 0.327794] pci 0000:01:05.0: reg 24: [mem 0xfe600000-0xfe6fffff] [ 0.327823] pci 0000:01:05.0: supports D1 D2 [ 0.327871] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.327880] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.327885] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.327891] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.327945] pci 0000:02:00.0: [8086:105e] type 00 class 0x020000 [ 0.327962] pci 0000:02:00.0: reg 10: [mem 0xfe8e0000-0xfe8fffff] [ 0.327974] pci 0000:02:00.0: reg 14: [mem 0xfe8c0000-0xfe8dffff] [ 0.327987] pci 0000:02:00.0: reg 18: [io 0xe800-0xe81f] [ 0.328025] pci 0000:02:00.0: reg 30: [mem 0xfe8a0000-0xfe8bffff pref] [ 0.328075] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.328113] pci 0000:02:00.1: [8086:105e] type 00 class 0x020000 [ 0.328130] pci 0000:02:00.1: reg 10: [mem 0xfe880000-0xfe89ffff] [ 0.328142] pci 0000:02:00.1: reg 14: [mem 0xfe860000-0xfe87ffff] [ 0.328154] pci 0000:02:00.1: reg 18: [io 0xe400-0xe41f] [ 0.328193] pci 0000:02:00.1: reg 30: [mem 0xfe840000-0xfe85ffff pref] [ 0.328243] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.328269] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.328288] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.328297] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.328302] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.328365] pci 0000:03:00.0: [14e4:165b] type 00 class 0x020000 [ 0.328388] pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.328511] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.333662] pci 0000:00:06.0: PCI bridge to [bus 03-03] [ 0.333686] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.333771] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.333786] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.333790] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.333794] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.333797] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode) [ 0.333801] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.333829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.334149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.334201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.334265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.334586] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.334895] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.342756] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.342856] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.342954] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.343050] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.343126] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.343187] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.343252] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.343313] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.343473] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.343482] vgaarb: loaded [ 0.343486] vgaarb: bridge control possible 0000:01:05.0 [ 0.343768] SCSI subsystem initialized [ 0.343849] libata version 3.00 loaded. [ 0.343879] ACPI: bus type usb registered [ 0.343916] usbcore: registered new interface driver usbfs [ 0.343933] usbcore: registered new interface driver hub [ 0.343971] usbcore: registered new device driver usb [ 0.344090] PCI: Using ACPI for IRQ routing [ 0.353797] PCI: pci_cache_line_size set to 64 bytes [ 0.353900] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.353903] e820: reserve RAM buffer [mem 0xd7f90000-0xd7ffffff] [ 0.354047] NetLabel: Initializing [ 0.354052] NetLabel: domain hash size = 128 [ 0.354056] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.354076] NetLabel: unlabeled traffic allowed by default [ 0.354154] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.354165] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.356223] Switching to clocksource hpet [ 0.369043] AppArmor: AppArmor Filesystem Enabled [ 0.369094] pnp: PnP ACPI init [ 0.369125] ACPI: bus type pnp registered [ 0.369614] pnp 00:00: [bus 00-ff] [ 0.369619] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.369623] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.369627] pnp 00:00: [io 0x0d00-0xffff window] [ 0.369630] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.369634] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.369637] pnp 00:00: [mem 0xd8000000-0xdfffffff window] [ 0.369641] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.369644] pnp 00:00: [mem 0xd8000000-0xdfffffff window] [ 0.369648] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.369734] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.369895] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.369899] pnp 00:01: [mem 0xd8000000-0xdfffffff] [ 0.369979] system 00:01: [mem 0xd8000000-0xdfffffff] has been reserved [ 0.369988] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.370076] pnp 00:02: [dma 4] [ 0.370080] pnp 00:02: [io 0x0000-0x000f] [ 0.370083] pnp 00:02: [io 0x0081-0x0083] [ 0.370090] pnp 00:02: [io 0x0087] [ 0.370093] pnp 00:02: [io 0x0089-0x008b] [ 0.370096] pnp 00:02: [io 0x008f] [ 0.370099] pnp 00:02: [io 0x00c0-0x00df] [ 0.370138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.370153] pnp 00:03: [io 0x0070-0x0071] [ 0.370197] pnp 00:03: [irq 8] [ 0.370238] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.370300] pnp 00:04: [io 0x0061] [ 0.370339] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.370351] pnp 00:05: [io 0x00f0-0x00ff] [ 0.370359] pnp 00:05: [irq 13] [ 0.370401] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.370438] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 0.370478] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.370593] pnp 00:07: [io 0x0060] [ 0.370596] pnp 00:07: [io 0x0064] [ 0.370599] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.370602] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.370673] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.370681] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.370689] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.370905] pnp 00:08: [io 0x0010-0x001f] [ 0.370909] pnp 00:08: [io 0x0022-0x003f] [ 0.370912] pnp 00:08: [io 0x0062-0x0063] [ 0.370915] pnp 00:08: [io 0x0065-0x006f] [ 0.370917] pnp 00:08: [io 0x0072-0x007f] [ 0.370920] pnp 00:08: [io 0x0080] [ 0.370923] pnp 00:08: [io 0x0084-0x0086] [ 0.370926] pnp 00:08: [io 0x0088] [ 0.370929] pnp 00:08: [io 0x008c-0x008e] [ 0.370932] pnp 00:08: [io 0x0090-0x009f] [ 0.370935] pnp 00:08: [io 0x00a2-0x00bf] [ 0.370937] pnp 00:08: [io 0x00b1] [ 0.370940] pnp 00:08: [io 0x00e0-0x00ef] [ 0.370943] pnp 00:08: [io 0x04d0-0x04d1] [ 0.370946] pnp 00:08: [io 0x040b] [ 0.370949] pnp 00:08: [io 0x04d6] [ 0.370952] pnp 00:08: [io 0x0c00-0x0c01] [ 0.370955] pnp 00:08: [io 0x0c14] [ 0.370958] pnp 00:08: [io 0x0c50-0x0c51] [ 0.370960] pnp 00:08: [io 0x0c52] [ 0.370963] pnp 00:08: [io 0x0c6c] [ 0.370966] pnp 00:08: [io 0x0c6f] [ 0.370969] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.370972] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.370974] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.370977] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.370980] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.370983] pnp 00:08: [io 0x0800-0x089f] [ 0.370990] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.370994] pnp 00:08: [io 0x0b00-0x0b1f] [ 0.370997] pnp 00:08: [io 0x0b20-0x0b3f] [ 0.371000] pnp 00:08: [io 0x0900-0x090f] [ 0.371002] pnp 00:08: [io 0x0910-0x091f] [ 0.371006] pnp 00:08: [io 0xfe00-0xfefe] [ 0.371008] pnp 00:08: [io 0x0060] [ 0.371011] pnp 00:08: [io 0x0064] [ 0.371014] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.371017] pnp 00:08: [mem 0xfec10000-0xfec1001f] [ 0.371020] pnp 00:08: [mem 0xfed80000-0xfed80fff] [ 0.371024] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.371166] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.371173] system 00:08: [io 0x040b] has been reserved [ 0.371180] system 00:08: [io 0x04d6] has been reserved [ 0.371186] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.371193] system 00:08: [io 0x0c14] has been reserved [ 0.371199] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 0.371206] system 00:08: [io 0x0c52] has been reserved [ 0.371212] system 00:08: [io 0x0c6c] has been reserved [ 0.371218] system 00:08: [io 0x0c6f] has been reserved [ 0.371224] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.371231] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.371238] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.371244] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.371251] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.371258] system 00:08: [io 0x0800-0x089f] has been reserved [ 0.371264] system 00:08: [io 0x0b00-0x0b1f] has been reserved [ 0.371271] system 00:08: [io 0x0b20-0x0b3f] has been reserved [ 0.371278] system 00:08: [io 0x0900-0x090f] has been reserved [ 0.371284] system 00:08: [io 0x0910-0x091f] has been reserved [ 0.371291] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 0.371299] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.371307] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.371314] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.371322] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.371387] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.371449] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.371458] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.371605] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.371609] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.371612] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.371616] pnp 00:0a: [mem 0x00100000-0xd7ffffff] [ 0.371619] pnp 00:0a: [mem 0xfec00000-0xffffffff] [ 0.371648] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations [ 0.371709] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.371717] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.371724] system 00:0a: [mem 0x00100000-0xd7ffffff] could not be reserved [ 0.371732] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.371740] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.371878] pnp: PnP ACPI: found 11 devices [ 0.371883] ACPI: ACPI bus type pnp unregistered [ 0.378655] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.378664] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.378672] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.378681] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.378691] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.378698] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.378706] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.378716] pci 0000:00:06.0: PCI bridge to [bus 03-03] [ 0.378723] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.378733] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.378783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.378787] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.378791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.378795] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xdfffffff] [ 0.378798] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff] [ 0.378802] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.378805] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.378809] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.378813] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.378817] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.378821] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.378825] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.378828] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.378832] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.378835] pci_bus 0000:04: resource 7 [mem 0xd8000000-0xdfffffff] [ 0.378839] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xffffffff] [ 0.378899] NET: Registered protocol family 2 [ 0.379223] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.381181] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.385401] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.385927] TCP: Hash tables configured (established 524288 bind 65536) [ 0.385934] TCP: reno registered [ 0.385967] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.386070] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.386263] NET: Registered protocol family 1 [ 0.386286] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.364446] pci 0000:01:05.0: Boot video device [ 1.364466] PCI: CLS 64 bytes, default 64 [ 1.364899] PCI-DMA: Disabling AGP. [ 1.365018] PCI-DMA: aperture base @ cc000000 size 65536 KB [ 1.365023] PCI-DMA: using GART IOMMU. [ 1.365030] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.370342] LVT offset 1 assigned for vector 0x400 [ 1.370366] IBS: LVT offset 1 assigned [ 1.370405] perf: AMD IBS detected (0x0000001f) [ 1.370649] audit: initializing netlink socket (disabled) [ 1.370671] type=2000 audit(1369985412.264:1): initialized [ 1.414178] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.417596] VFS: Disk quotas dquot_6.5.2 [ 1.417666] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.418469] fuse init (API version 7.19) [ 1.418587] msgmni has been set to 15684 [ 1.419038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.419087] io scheduler noop registered [ 1.419092] io scheduler deadline registered (default) [ 1.419137] io scheduler cfq registered [ 1.419371] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.419497] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.419615] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.419623] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.419629] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 1.419637] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.419656] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt [ 1.419663] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.419671] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded [ 1.419692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.419730] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.419910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.419924] ACPI: Power Button [PWRB] [ 1.419986] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.419994] ACPI: Power Button [PWRF] [ 1.420094] ACPI: processor limited to max C-state 1 [ 1.423034] ERST: Failed to get Error Log Address Range. [ 1.463465] Freeing initrd memory: 15180k freed [ 1.492454] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 1.492584] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.492784] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.497325] Linux agpgart interface v0.103 [ 1.501012] brd: module loaded [ 1.503087] loop: module loaded [ 1.503273] ahci 0000:00:11.0: version 3.0 [ 1.503388] ahci 0000:00:11.0: irq 42 for MSI/MSI-X [ 1.503497] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.503509] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.504404] scsi0 : ahci [ 1.504591] scsi1 : ahci [ 1.504772] scsi2 : ahci [ 1.504977] scsi3 : ahci [ 1.505086] ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 42 [ 1.505095] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 42 [ 1.505103] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 42 [ 1.505111] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 42 [ 1.505366] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.505857] Fixed MDIO Bus: probed [ 1.505931] tun: Universal TUN/TAP device driver, 1.6 [ 1.505937] tun: (C) 1999-2004 Max Krasnyansky [ 1.506092] PPP generic driver version 2.4.2 [ 1.506225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.506336] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.506377] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.506396] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.506431] QUIRK: Enable AMD PLL fix [ 1.506446] ehci_hcd 0000:00:12.2: debug port 1 [ 1.506485] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800 [ 1.516357] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.516407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.516414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.516421] usb usb1: Product: EHCI Host Controller [ 1.516427] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd [ 1.516433] usb usb1: SerialNumber: 0000:00:12.2 [ 1.516709] hub 1-0:1.0: USB hub found [ 1.516724] hub 1-0:1.0: 5 ports detected [ 1.516946] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.516963] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.516978] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.517012] ehci_hcd 0000:00:13.2: debug port 1 [ 1.517036] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400 [ 1.528365] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.528414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.528421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.528429] usb usb2: Product: EHCI Host Controller [ 1.528434] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd [ 1.528440] usb usb2: SerialNumber: 0000:00:13.2 [ 1.528695] hub 2-0:1.0: USB hub found [ 1.528708] hub 2-0:1.0: 5 ports detected [ 1.528968] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 1.528985] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.529007] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.529044] ehci_hcd 0000:00:16.2: debug port 1 [ 1.529069] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000 [ 1.540364] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.540413] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.540420] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540427] usb usb3: Product: EHCI Host Controller [ 1.540433] usb usb3: Manufacturer: Linux 3.5.0-23-generic ehci_hcd [ 1.540439] usb usb3: SerialNumber: 0000:00:16.2 [ 1.540695] hub 3-0:1.0: USB hub found [ 1.540707] hub 3-0:1.0: 4 ports detected [ 1.540894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.541058] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.541083] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.541137] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000 [ 1.600382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.600394] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.600402] usb usb4: Product: OHCI Host Controller [ 1.600407] usb usb4: Manufacturer: Linux 3.5.0-23-generic ohci_hcd [ 1.600413] usb usb4: SerialNumber: 0000:00:12.0 [ 1.600672] hub 4-0:1.0: USB hub found [ 1.600691] hub 4-0:1.0: 5 ports detected [ 1.600890] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.600904] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.600936] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000 [ 1.660372] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.660384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.660392] usb usb5: Product: OHCI Host Controller [ 1.660397] usb usb5: Manufacturer: Linux 3.5.0-23-generic ohci_hcd [ 1.660403] usb usb5: SerialNumber: 0000:00:13.0 [ 1.660671] hub 5-0:1.0: USB hub found [ 1.660690] hub 5-0:1.0: 5 ports detected [ 1.660932] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 1.660950] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6 [ 1.660986] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5fc000 [ 1.720405] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.720418] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.720425] usb usb6: Product: OHCI Host Controller [ 1.720430] usb usb6: Manufacturer: Linux 3.5.0-23-generic ohci_hcd [ 1.720436] usb usb6: SerialNumber: 0000:00:16.0 [ 1.720747] hub 6-0:1.0: USB hub found [ 1.720769] hub 6-0:1.0: 4 ports detected [ 1.720929] uhci_hcd: USB Universal Host Controller Interface driver [ 1.721070] usbcore: registered new interface driver libusual [ 1.721127] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.721989] i8042: No controller found [ 1.722203] mousedev: PS/2 mouse device common for all mice [ 1.722605] rtc_cmos 00:03: RTC can wake from S4 [ 1.722864] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.722908] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.723037] device-mapper: uevent: version 1.0.3 [ 1.723219] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.723239] cpuidle: using governor ladder [ 1.723244] cpuidle: using governor menu [ 1.723248] EFI Variables Facility v0.08 2004-May-17 [ 1.723761] ashmem: initialized [ 1.723978] TCP: cubic registered [ 1.724141] NET: Registered protocol family 10 [ 1.724469] NET: Registered protocol family 17 [ 1.724487] Key type dns_resolver registered [ 1.724714] PM: Hibernation image not present or could not be loaded. [ 1.724733] registered taskstats version 1 [ 1.728413] Key type trusted registered [ 1.731159] Key type encrypted registered [ 1.734601] Magic number: 13:541:522 [ 1.734814] rtc_cmos 00:03: setting system clock to 2013-05-31 07:30:13 UTC (1369985413) [ 1.734978] powernow-k8: Found 1 AMD Athlon(tm) II Neo N36L Dual-Core Processor (2 cpu cores) (version 2.20.00) [ 1.735042] powernow-k8: 0 : pstate 0 (1300 MHz) [ 1.735047] powernow-k8: 1 : pstate 1 (1100 MHz) [ 1.735052] powernow-k8: 2 : pstate 2 (800 MHz) [ 1.735358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.735370] EDD information not available. [ 1.996378] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.000378] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.000425] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.000466] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.006582] ata3.00: ATA-7: HDS721050KLA33R RSD HUA, GK6OA9JA, max UDMA/133 [ 2.006595] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.007764] ata3.00: configured for UDMA/133 [ 2.011093] ata4.00: ATA-7: HDS725050KLA360, K2AOAF0D, max UDMA/133 [ 2.011106] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.012578] ata4.00: configured for UDMA/133 [ 2.015360] ata2.00: ATA-7: HDS725050KLA360, K2AOAF0D, max UDMA/133 [ 2.015373] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.016864] ata2.00: configured for UDMA/133 [ 2.019615] ata1.00: ATA-7: HDS725050KLA360, K2AOAF0D, max UDMA/133 [ 2.019627] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.021065] ata1.00: configured for UDMA/133 [ 2.021419] scsi 0:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5 [ 2.021693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.021718] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.021794] sd 0:0:0:0: [sda] Write Protect is off [ 2.021803] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.021831] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.040464] sda: sda1 sda2 sda3 [ 2.041696] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.042001] scsi 1:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5 [ 2.042261] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.042276] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.042367] sd 1:0:0:0: [sdb] Write Protect is off [ 2.042378] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.042434] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.073996] sdb: sdb1 [ 2.074385] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.074722] scsi 2:0:0:0: Direct-Access ATA HDS721050KLA33R GK6O PQ: 0 ANSI: 5 [ 2.074980] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.074991] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.075063] sd 2:0:0:0: [sdc] Write Protect is off [ 2.075071] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.075093] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.107944] sdc: sdc1 [ 2.108356] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.108690] scsi 3:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5 [ 2.108951] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.108963] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.109033] sd 3:0:0:0: [sdd] Write Protect is off [ 2.109040] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.109063] sd 3:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.148053] sdd: sdd1 [ 2.148456] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.151099] Freeing unused kernel memory: 948k freed [ 2.151450] Write protecting the kernel read-only data: 12288k [ 2.159432] Freeing unused kernel memory: 1352k freed [ 2.166168] Freeing unused kernel memory: 1048k freed [ 2.201737] udevd[97]: starting version 175 [ 2.281839] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 2.281851] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 2.281903] e1000e 0000:02:00.0: Disabling ASPM L1 [ 2.282023] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.282082] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X [ 2.307671] tg3.c:v3.123 (March 21, 2012) [ 2.323832] scsi4 : pata_atiixp [ 2.328620] scsi5 : pata_atiixp [ 2.329599] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.329607] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.355010] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address 3c:d9:2b:0c:fb:7d [ 2.355022] tg3 0000:03:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.355032] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.355040] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.368296] Refined TSC clocksource calibration: 1297.838 MHz. [ 2.368312] Switching to clocksource tsc [ 2.458782] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:0e:91:8a [ 2.458798] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 2.458886] e1000e 0000:02:00.0: eth1: MAC: 0, PHY: 4, PBA No: D28207-003 [ 2.458935] e1000e 0000:02:00.1: Disabling ASPM L1 [ 2.459063] e1000e 0000:02:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.459120] e1000e 0000:02:00.1: irq 44 for MSI/MSI-X [ 2.536805] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.536818] EXT4-fs (sda1): write access will be enabled during recovery [ 2.636932] e1000e 0000:02:00.1: eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:0e:91:8b [ 2.636947] e1000e 0000:02:00.1: eth2: Intel(R) PRO/1000 Network Connection [ 2.637035] e1000e 0000:02:00.1: eth2: MAC: 0, PHY: 4, PBA No: D28207-003 [ 3.775693] EXT4-fs (sda1): recovery complete [ 3.791980] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.093422] Adding 3906556k swap on /dev/sda2. Priority:-1 extents:1 across:3906556k [ 5.427054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.427067] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.427076] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 5.569516] udevd[331]: starting version 175 [ 6.126942] lp: driver loaded but no devices found [ 6.239370] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.326283] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.367259] microcode: CPU0: patch_level=0x010000c8 [ 6.389705] MCE: In-kernel MCE decoding enabled. [ 6.414185] EDAC MC: Ver: 2.1.0 [ 6.421370] AMD64 EDAC driver v3.4.0 [ 6.421911] EDAC amd64: DRAM ECC disabled. [ 6.421923] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.421923] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.421923] (Note that use of the override may cause unknown side effects.) [ 6.470677] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 6.470869] sp5100_tco: mmio address 0xb8fe00 already in use [ 6.525889] [drm] Initialized drm 1.1.0 20060810 [ 6.633502] kvm: Nested Virtualization enabled [ 6.633510] kvm: Nested Paging enabled [ 6.808044] microcode: CPU1: patch_level=0x010000c8 [ 6.810910] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 6.864752] [drm] radeon defaulting to kernel modesetting. [ 6.864758] [drm] radeon kernel modesetting enabled. [ 6.865373] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1609). [ 6.865411] [drm] register mmio base: 0xFE7F0000 [ 6.865414] [drm] register mmio size: 65536 [ 6.866322] ATOM BIOS: AMD_1407_150 [ 6.866355] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) [ 6.866360] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 6.867004] [drm] Detected VRAM RAM=128M, BAR=128M [ 6.867011] [drm] RAM width 32bits DDR [ 6.867429] [TTM] Zone kernel: Available graphics memory: 4024502 kiB [ 6.867432] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.867434] [TTM] Initializing pool allocator [ 6.867446] [TTM] Initializing DMA pool allocator [ 6.867483] [drm] radeon: 128M of VRAM memory ready [ 6.867485] [drm] radeon: 512M of GTT memory ready. [ 6.867508] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.867510] [drm] Driver supports precise vblank timestamp query. [ 6.867541] [drm] radeon: irq initialized. [ 6.867548] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.869114] [drm] Loading RS780 Microcode [ 7.119653] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 7.119795] radeon 0000:01:05.0: WB enabled [ 7.119802] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880210d95c00 [ 7.120194] radeon 0000:01:05.0: setting latency timer to 64 [ 7.152479] [drm] ring test on 0 succeeded in 0 usecs [ 7.152643] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.152973] [drm] Radeon Display Connectors [ 7.152976] [drm] Connector 0: [ 7.152978] [drm] VGA-1 [ 7.152982] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 7.152983] [drm] Encoders: [ 7.152985] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.153009] [drm] radeon: power management initialized [ 7.164639] No connectors reported connected with modes [ 7.164648] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.175693] [drm] fb mappable at 0xF0142000 [ 7.175696] [drm] vram apper at 0xF0000000 [ 7.175697] [drm] size 3145728 [ 7.175699] [drm] fb depth is 24 [ 7.175701] [drm] pitch is 4096 [ 7.175863] fbcon: radeondrmfb (fb0) is primary device [ 7.176026] Console: switching to colour frame buffer device 128x48 [ 7.187050] fb0: radeondrmfb frame buffer device [ 7.187052] drm: registered panic notifier [ 7.187061] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0 [ 7.374917] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.584057] type=1400 audit(1369985419.345:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=475 comm=" apparmor_parser" [ 7.584088] type=1400 audit(1369985419.345:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=478 com m="apparmor_parser" [ 7.584904] type=1400 audit(1369985419.349:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhc p-client.action" pid=475 comm="apparmor_parser" [ 7.585363] type=1400 audit(1369985419.349:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhcli ent-script" pid=475 comm="apparmor_parser" [ 7.586181] type=1400 audit(1369985419.349:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=476 com m="apparmor_parser" [ 7.586267] type=1400 audit(1369985419.349:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=477 com m="apparmor_parser" [ 7.587058] type=1400 audit(1369985419.349:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm- dhcp-client.action" pid=476 comm="apparmor_parser" [ 7.587149] type=1400 audit(1369985419.349:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm- dhcp-client.action" pid=477 comm="apparmor_parser" [ 7.587567] type=1400 audit(1369985419.349:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/d hclient-script" pid=476 comm="apparmor_parser" [ 7.587665] type=1400 audit(1369985419.349:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/d hclient-script" pid=477 comm="apparmor_parser" [ 7.960238] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 7.983688] e1000e 0000:02:00.0: eth1: changing MTU from 1500 to 9000 [ 8.033175] XFS (sda3): Mounting Filesystem [ 8.275107] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X [ 8.376402] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X [ 8.378081] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.378530] tg3 0000:03:00.0: irq 45 for MSI/MSI-X [ 9.154300] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.884963] XFS (sda3): Starting recovery (logdev: internal) [ 10.974636] XFS (sda3): Ending recovery (logdev: internal) [ 10.982907] XFS (sdb1): Mounting Filesystem [ 11.077153] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.078911] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 11.148859] XFS (sdb1): Starting recovery (logdev: internal) [ 11.529834] tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 11.529842] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX [ 11.531450] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.198242] XFS (sdb1): Ending recovery (logdev: internal) [ 13.207790] XFS (sdc1): Mounting Filesystem [ 13.340666] XFS (sdc1): Starting recovery (logdev: internal) [ 13.532220] XFS (sdc1): Invalid block length (0xfffffffe) for buffer [ 13.532243] XFS (sdc1): log mount/recovery failed: error 117 [ 13.532423] XFS (sdc1): log mount failed [ 13.573413] XFS (sdd1): Mounting Filesystem [ 13.748036] XFS (sdd1): Starting recovery (logdev: internal) [ 31.691120] XFS (sdd1): Ending recovery (logdev: internal) [ 100.698110] usb 4-5: new full-speed USB device number 2 using ohci_hcd [ 100.864374] usb 4-5: New USB device found, idVendor=04b3, idProduct=301a [ 100.864382] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 100.864387] usb 4-5: Product: USB 1.1 2port downstream low power hub [ 100.864390] usb 4-5: Manufacturer: Lite-On Technology [ 100.870435] hub 4-5:1.0: USB hub found [ 100.872368] hub 4-5:1.0: 3 ports detected [ 101.158341] usb 4-5.1: new full-speed USB device number 3 using ohci_hcd [ 101.264374] usb 4-5.1: New USB device found, idVendor=04b3, idProduct=301b [ 101.264380] usb 4-5.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 101.264385] usb 4-5.1: Product: USB Productivity Option Keyboard( has the hub in # 1 ) [ 101.264388] usb 4-5.1: Manufacturer: Lite-On Technology [ 101.317491] usbcore: registered new interface driver usbhid [ 101.317497] usbhid: USB HID core driver [ 101.333997] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:12 .0/usb4/4-5/4-5.1/4-5.1:1.0/input/input2 [ 101.334181] hid-generic 0003:04B3:301B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:12.0-5.1/input0 [ 101.336597] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:12 .0/usb4/4-5/4-5.1/4-5.1:1.1/input/input3 [ 101.336869] hid-generic 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology USB Productivity Option K eyboard( has the hub in # 1 )] on usb-0000:00:12.0-5.1/input1 [ 113.348098] init: failsafe main process (1113) killed by TERM signal [ 113.789711] audit_printk_skb: 18 callbacks suppressed [ 113.789717] type=1400 audit(1369985525.830:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1177 c omm="apparmor_parser" [ 113.790238] type=1400 audit(1369985525.830:19): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1176 c omm="apparmor_parser" [ 113.791148] type=1400 audit(1369985525.830:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm -dhcp-client.action" pid=1176 comm="apparmor_parser" [ 113.791664] type=1400 audit(1369985525.830:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/d hclient-script" pid=1176 comm="apparmor_parser" [ 113.838295] type=1400 audit(1369985525.878:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1179 c omm="apparmor_parser" [ 125.069966] init: tty1 main process (1982) killed by INT signal [ 125.070007] init: tty1 main process ended, respawning [ 326.373068] XFS (sdc1): Mounting Filesystem [ 326.460431] XFS (sdc1): Starting recovery (logdev: internal) [ 326.712579] XFS (sdc1): Invalid block length (0xfffffffe) for buffer [ 326.712619] XFS (sdc1): log mount/recovery failed: error 117 [ 326.712871] XFS (sdc1): log mount failed [ 764.723542] XFS (sdc1): Mounting Filesystem [ 764.836336] XFS (sdc1): Ending clean mount root@ceph2:/var/log/ceph#